FX3G-CNV-ADP

/// ADAPTER BOARDS þ FX1S þ FX1N þ FX3G ¨ FX3U ¨ FX3UC 왎 Setpoint Adapter Boards Analog Setpoint Adapters FX1N-8AV-BD and FX3G-8AV-BD FX1N-8AV-BD FX1N-8AV-BD Applicable for Power supply Adjusting range Related I/O points Potentiometer evaluation Weight Dimensions (WxHxD) FX3G-8AV-BD 4 Order information FX3G-8AV-BD Base units FX1S/FX1N Base units FX3G From base unit From base unit 8 bit 8 bit 0 0 Via application instruction from the PLC CPU (FNC 85/86) kg 0.02 0.02 mm 43x38.5x22 35x51.2x12 Art. no. 130744 221267 ¨ FX1S ¨ FX1N ¨ FX3G þ FX3U ¨ FX3UC 왎 Communications Adapter Boards Adapter Board FX3U-USB-BD R D SD This adapter board allows direct USB 2.0 connection to the front of the FX3U PLC for program maintenance. FX3U-USB-BD SPECIAL FUNCTION MODULES The FX첸첸-8AV-BD analog setpoint adapters enable the user to set 8 analog setpoint values. The analog values of the potentiometers are read into the controller and used as default setpoint values for timers, counters and data registers by the user’s PLC programs. Setpoint value polling and the definition of the potentiometer scales are performed in the PLC program using the dedicated instructions VRRD/VRSC (FNC85/86). The FX첸첸-8AV-BD analog setpoint adapters are installed in the expansion slot of the FX1S/FX1N/ FX3G CPU. No additional power supply is required for operation. Applicable for Power supply Weight Dimensions (WxHxD) Order information 왎 Expansion Adapters Base units FX3U 5 V DC (from base unit) kg 0.02 mm 19.6x46.1x53.5 Art. no. 165284 þ FX1S þ FX1N þ FX3G þ FX3U ¨ FX3UC Expansion Adapters FX1N-CNV-BD, FX3G-CNV-ADP, FX3U-CNV-BD The below listed expansion adapters enable the connection of the adapter modules FX첸첸-첸첸첸ADP on the left hand side of the FX1N, FX3G and FX3U base units. FX3G -CNV -ADP FX3G-CNV-ADP Applicable for Weight Dimensions (WxH) Order information Base units FX1S/FX1N kg 0.01 mm 43x38x(D)14 Art. no. 130745 Base units FX3G 0.1 90x14.6x(D)86 Base units FX3U 0.01 19.6x46.1x(D)53.5 221268 165285 FX3G-CNV-ADP 48 MITSUBISHI ELECTRIC