PS21353-GP

2.12 2nd Generation DIP and Mini-DIP-IPM Features: • Ultra Compact Transfer Mold Package • Including Drive and Protection ICs (low and high voltage drive ICs) • Low and High Speed Types • All Mitsubishi DIP and Mini-DIP-IPMs have lead-free terminals • From January 2006 onwards, all DIP and Mini-DIP-IPMs will be supplied with completely lead-free technology Line-up DIP & Mini-DIP-IPM Type VCES (V) Isolation Voltage (Vrms) Motor Rating (kW) 0.1 0.2 0.4 0.75 1.5 2.0 Low speed fPWM 5kHz DIP High speed fPWM 15kHz 2500 Low speed fPWM 5kHz Mini DIP High speed fPWM 15kHz # PS21244-EP 600 PS21254-EP PS21245-EP PS21246-EP PS21255-EP 2. PS20341-GP PS20341-NP# PS21342-GP PS21342-NP# PS21343-GP PS21343-NP# 500 / 600 PS20351-GP PS20351-NP# PS21351-NP# PS21352-GP PS21352-NP# PS21353-GP PS21353-NP# : reduced t dead Circuit Diagram www.mitsubishichips.com · www. mitsubishielectric.de 57 2.12 2nd Generation DIP and Mini-DIP-IPM (Dual-in-line Package Intelligent Power Modules) Electrical Characteristics Type Number Applicable Motor Ratings (kW) Isolation Voltage (V) VCE(sat) @ Tj= 25ºC (V) Typ. Max. Thermal & Mechanical Characteristics IGBT FW-Diode PackageNo. VCES (V) Ic (A) fc (kHz) Rth(j-c) (ºC/W) Rth(j-c) (ºC/W) Rth(c-f) (ºC/W) 600V DIP-IPMs P21244-EP PS21245-EP PS21246-EP PS21254-EP PS21255-EP 600 600 600 600 600 0.75 1.5 2.0 0.75 1.5 15 20 25 15 20 5 5 5 15 15 2500 2500 2500 2500 2500 1.55 1.55 1.55 1.80 1.80 2.85 2.20 2.10 2.85 2.20 4.5 4.5 3.0 4.5 4.5 0.067 0.067 0.067 0.067 0.067 D1 D1 D1 D1 D1 500V / 600V Mini-DIP-IPMs PS20341-GP PS20341-NP PS20351-GP PS20351-NP PS21342-GP PS21342-NP PS21343-GP PS21343-NP PS21351-NP 500 500 500 500 600 600 600 600 600 600 600 600 600 0.1 0.1 0.1 0.1 0.2 0.2 0.4 0.4 0.1 0.2 0.2 0.4 0.4 3 3 3 3 5 5 10 10 3 5 5 10 10 5 5 15 15 5 5 5 5 15 15 15 15 15 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 1.40 1.40 1.70 1.70 1.55 1.55 1.55 1.55 1.80 1.80 1.80 1.80 1.80 1.90 1.90 2.35 2.35 2.15 2.15 2.15 2.15 2.45 2.45 2.45 2.45 2.45 7.0 7.0 7.0 7.0 6.0 6.0 5.0 5.0 7.0 6.0 6.0 5.0 5.0 8.0 8.0 8.0 8.0 6.5 6.5 6.5 6.5 8.0 6.5 6.5 6.5 6.5 D2 D2 D2 D2 D2 D2 D2 D2 D2 D2 D2 D2 D2 2. PS21352-GP PS21352-NP PS21353-GP PS21353-NP Package D1 Package D2 Note1: (***) = Dummy Pin. Note 2: In order to increase the surface distance between terminals, cut a slit, etc. on the PCB surface Dimensions in mm 58 Power Devices General Catalogue 2005