RA03M8894M

RA03M8894M

  • 厂商:

    MITSUBISHI(三菱)

  • 封装:

  • 描述:

    RA03M8894M - 889-941MHz 3.6W 7.2V, 2 Stage Amp. For PORTABLE RADIO - Mitsubishi Electric Semiconduct...

  • 详情介绍
  • 数据手册
  • 价格&库存
RA03M8894M 数据手册
Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RA03M8894M RA03M8894 RA03M8894M BLOCK DIAGRAM 2 3 RoHS Compliance , 889-941MHz 3.6W 7.2V, 2 Stage Amp. For PORTABLE RADIO DESCRIPTION The RA03M8894M is a 3.6-watt RF MOSFET Amplifier Module for 7.2-volt portable radios that operate in the 889- to 941-MHz range. The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (VGG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output power and drain current increase as the gate voltage increases. With a gate voltage around 2.5V (minimum), output power and drain current increases substantially. The nominal output power becomes available at 3V (typical) and 3.5V (maximum). At VGG=3.5V, the typical gate current is 1 mA. This module is designed for non-linear FM modulation, but may also be used for linear modulation by setting the drain quiescent current with the gate voltage and controlling the output power with the input power. FEATURES • Enhancement-Mode MOSFET Transistors (IDD≅0 @ VDD=7.2V, VGG=0V) • Pout>3.6W @ VDD=7.2V, VGG=3.5V, Pin=50mW • ηT>32% @ Pout=3W (VGG control), VDD=7.2V, Pin=50mW • Broadband Frequency Range: 889-941MHz • Low-Power Control Current IGG=1mA (typ) at VGG=3.5V • Module Size: 30 x 10 x 5.4 mm • Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output power with the input power 1 4 5 1 2 3 4 5 RF Input (Pin) Gate Voltage (VGG), Power Control Drain Voltage (VDD), Battery RF Output (Pout) RF Ground (Case) PACKAGE CODE: H46S RoHS COMPLIANT • RA03M8894M-101 is a RoHS compliant products. • RoHS compliance is indicate by the letter “G” after the Lot Marking. • This product include the lead in the Glass of electronic parts and the lead in electronic Ceramic parts. How ever, it applicable to the following exceptions of RoHS Directions. 1.Lead in the Glass of a cathode-ray tube, electronic parts, and fluorescent tubes. 2.Lead in electronic Ceramic parts. ORDERING INFORMATION: ORDER NUMBER RA03M8894M-101 SUPPLY FORM Antistatic tray, 50 modules/tray RA03M8894M 28 Jun 2010 1/9 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Silicon RF Power Semiconductors RoHS COMPLIANT RA03M8894M RA03M8894 RA03M8894M RATING 9.2 4 70 5 -30 to +90 -40 to +110 UNIT V V mW W ° C ° C MAXIMUM RATINGS (Tcase=+25°C, unless otherwise specified) SYMBOL PARAMETER VDD VGG Pin Pout Tcase(OP) Tstg Drain Voltage Gate Voltage Input Power Output Power Operation Case Temperature Range Storage Temperature Range f=889-941MHz, ZG=ZL=50Ω CONDITIONS VGG
RA03M8894M
物料型号: - 型号为RA03M8894M。

器件简介: - RA03M8894M是一款3.6瓦特射频MOSFET放大器,适用于889-941MHz频段的7.2伏特便携式无线电设备。该模块可以直接将电池连接到增强型MOSFET晶体管的漏极。在没有栅极电压时,漏极和RF输入信号只有很小的漏电流,信号衰减高达60dB。随着栅极电压的增加,输出功率和漏极电流增加。

引脚分配: - 1 RF输入(Pin) - 2 栅极电压(VGG),功率控制 - 3 漏极电压(VDD),电池 - RF输出(Pout) - 5 RF地(Case)

参数特性: - 工作电压:7.2V - 栅极电压:3.5V时典型栅极电流为1mA - 输出功率:在VDD=7.2V,VGG=3.5V,输入功率为50mW条件下,输出功率大于3.6W - 总效率:在输出功率为3W时,总效率大于32% - 频率范围:889-941MHz - 栅极控制电流:在VGG=3.5V时,典型值为1mA

功能详解: - 该模块设计用于非线性FM调制,但也可以通过设置栅极电压来控制漏极静态电流,并用输入功率控制输出功率,从而用于线性调制。

应用信息: - 适用于7.2伏特的便携式无线电设备,特别是在889-941MHz频段。

封装信息: - 封装代码:H46S - 模块尺寸:30 x 10 x 5.4 mm
RA03M8894M 价格&库存

很抱歉,暂时无法提供与“RA03M8894M”相匹配的价格&库存,您可以联系我们找货

免费人工找货