RA07H0608M-101

RA07H0608M-101

  • 厂商:

    MITSUBISHI(三菱)

  • 封装:

  • 描述:

    RA07H0608M-101 - 68-88MHz 7W 12.5V, 2 Stage Amp. For PORTABLE RADIO - Mitsubishi Electric Semiconduc...

  • 详情介绍
  • 数据手册
  • 价格&库存
RA07H0608M-101 数据手册
Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RA07H0608M RA07H0608 RA07H0608M BLOCK DIAGRAM 2 3 RoHS Compliance ,68-88MHz 7W 12.5V, 2 Stage Amp. For PORTABLE RADIO DESCRIPTION The RA07H0608M is a 7-watt RF MOSFET Amplifier Module for 12.5-volt portable radios that operate in the 68- to 88-MHz range. The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (VGG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output power and drain current increase as the gate voltage increases. With a gate voltage around 4V (minimum), output power and drain current increases substantially. The nominal output power becomes available at 4.5V (typical) and 5V (maximum). At VGG=5V, the typical gate current is 1 mA. This module is designed for non-linear FM modulation, but may also be used for linear modulation by setting the drain quiescent current with the gate voltage and controlling the output power with the input power. FEATURES • Enhancement-Mode MOSFET Transistors (IDD≅0 @ VDD=12.5V, VGG=0V) • Pout>7W @ VDD=12.5V, VGG=5V, Pin=30mW • ηT>38% @ Pout=7W (VGG control), VDD=12.5V, Pin=30mW • Broadband Frequency Range: 68-88MHz • Low-Power Control Current IGG=1mA (typ) at VGG=5V • Module Size: 30 x 10 x 5.4 mm • Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output power with the input power 1 4 5 1 2 3 4 5 RF Input (Pin) Gate Voltage (VGG), Power Control Drain Voltage (VDD), Battery RF Output (Pout) RF Ground (Case) PACKAGE CODE: H46S RoHS COMPLIANT • RA07H0608M-101 is a RoHS compliant products. • RoHS compliance is indicate by the letter “G” after the Lot Marking. • This product include the lead in the Glass of electronic parts and the lead in electronic Ceramic parts. How ever, it applicable to the following exceptions of RoHS Directions. 1.Lead in the Glass of a cathode-ray tube, electronic parts, and fluorescent tubes. 2.Lead in electronic Ceramic parts. ORDERING INFORMATION: ORDER NUMBER RA07H0608M-101 SUPPLY FORM Antistatic tray, 50 modules/tray RA07H0608M 28 Jun 2010 1/9 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Silicon RF Power Semiconductors RoHS COMPLIANT RA07H0608M RA07H0608 RA07H0608M MAXIMUM RATINGS (Tcase=+25°C, unless otherwise specified) SYMBOL PARAMETER VDD VDD VGG Pin Pout Tcase(OP) Tstg Drain Voltage Drain Voltage Gate Voltage Input Power Output Power Operation Case Temperature Range Storage Temperature Range f=68-88MHz, ZG=ZL=50Ω CONDITIONS VGG=0V, Pin=0W VGG
RA07H0608M-101
1. 物料型号: - 型号为RA07H0608M。

2. 器件简介: - RA07H0608M是一款7瓦射频MOSFET放大器模块,适用于12.5伏特的便携式收音机,工作频率范围为68至88MHz。

3. 引脚分配: - RF输入(P_in):射频输入端。 - 门极电压(V_GG):控制放大器的门极电压输入端。 - 漏极电压(VDD):放大器的电源输入端。 - RF输出(P_out):射频输出端。 - RF地(Case):射频接地端。

4. 参数特性: - 漏极电压(VDD)最大值为16V。 - 门极电压(VGG)最大值为6V。 - 输入功率(Pin)最大值为50mW。 - 输出功率(Pout)最大值为10W。 - 工作温度范围为-30至+90摄氏度。

5. 功能详解: - 模块设计用于非线性FM调制,但通过设置漏极静态电流和控制输入功率来控制输出功率,也可以用于线性调制。 - 模块在V_GG=5V时,典型门极电流为1mA。 - 效率在输出功率7W时大于38%。

6. 应用信息: - 模块由一个氧化铝基板和一个铜法兰焊接而成,MOSFET晶体管芯片贴装在金属上,并通过树脂覆盖。 - 需要避免对氧化铝基板施加弯曲力和对引线施加机械应力。 - 模块对静电放电敏感,需要采取适当的静电放电预防措施。

7. 封装信息: - 封装代码为H46S,模块尺寸为30 x 10 x 5.4毫米。
RA07H0608M-101 价格&库存

很抱歉,暂时无法提供与“RA07H0608M-101”相匹配的价格&库存,您可以联系我们找货

免费人工找货