RA20H8087M_10

RA20H8087M_10

  • 厂商:

    MITSUBISHI(三菱)

  • 封装:

  • 描述:

    RA20H8087M_10 - 806-870MHz 20W 12.5V, 3 Stage Amp. For MOBILE RADIO - Mitsubishi Electric Semiconduc...

  • 详情介绍
  • 数据手册
  • 价格&库存
RA20H8087M_10 数据手册
Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RA20H8087M BLOCK DIAGRAM RoHS Compliance, 806-870MHz 20W 12.5V, 3 Stage Amp. For MOBILE RADIO DESCRIPTION The RA20H8087M is a 20-watt RF MOSFET Amplifier Module for 12.5-volt mobile radios that operate in the 806- to 870-MHz range. The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (VGG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output power and drain current increase as the gate voltage increases. With a gate voltage around 4V (minimum), output power and drain current increases substantially. The nominal output power becomes available at 4.5V (typical) and 5V (maximum). At VGG=5V, the typical gate current is 1 mA. This module is designed for non-linear FM modulation, but may also be used for linear modulation by setting the drain quiescent current with the gate voltage and controlling the output power with the input power. FEATURES • Enhancement-Mode MOSFET Transistors (IDD≅0 @ VDD=12.5V, VGG=0V) • Pout>20W, ηT>25% @ VDD=12.5V, VGG=5V, Pin=50mW • Broadband Frequency Range: 806-870MHz • Low-Power Control Current IGG=1mA (typ) at VGG=5V • Module Size: 66 x 21 x 9.88 mm • Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output power with the input power 2 3 1 4 5 1 2 3 4 5 RF Input (Pin) Gate Voltage (VGG), Power Control Drain Voltage (VDD), Battery RF Output (Pout) RF Ground (Case) PACKAGE CODE: H2S RoHS COMPLIANCE • RA20H8087M-101 is a RoHS compliant products. • RoHS compliance is indicate by the letter “G” after the Lot Marking. • This product include the lead in the Glass of electronic parts and the lead in electronic Ceramic parts. How ever ,it applicable to the following exceptions of RoHS Directions. 1.Lead in the Glass of a cathode-ray tube, electronic parts, and fluorescent tubes. 2.Lead in electronic Ceramic parts. ORDERING INFORMATION: ORDER NUMBER RA20H8087M-101 SUPPLY FORM Antistatic tray, 10 modules/tray RA20H8087M 24 Jun 2010 1/10 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Silicon RF Power Semiconductors RoHS COMPLIANCE RA20H8087M MAXIMUM RATINGS (Tcase=+25°C, unless otherwise specified) SYMBOL PARAMETER VDD VGG Pin Pout Tcase(OP) Tstg Drain Voltage Gate Voltage Input Power Output Power Operation Case Temperature Range Storage Temperature Range f=806-870MHz, ZG=ZL=50Ω CONDITIONS VGG
RA20H8087M_10
1. 物料型号: - 型号为RA20H8087M,是一款由三菱电机生产的RF MOSFET放大器模块。

2. 器件简介: - RA20H8087M是一款20瓦的RF MOSFET放大器模块,适用于12.5伏特的移动无线电设备,工作频率范围为806-870MHz。该模块可以直接将电池连接到增强型MOSFET晶体管的漏极,无需栅极电压时仅有小的漏电流,输出功率和漏极电流随栅极电压增加而增加。

3. 引脚分配: - 文档中提供了模块的方块图和测试块图,显示了RF输入、栅极电压、漏极电压、RF输出和RF地(案例)的连接方式。

4. 参数特性: - 最大额定值包括漏极电压、栅极电压、输入功率和输出功率等。 - 电气特性包括工作频率范围、输出功率、总效率、二次和三次谐波、输入VSWR、栅极电流等。

5. 功能详解: - 该模块设计用于非线性FM调制,但也可以用于线性调制,通过栅极电压设置漏极的静态电流,并用输入功率控制输出功率。

6. 应用信息: - 模块由铝基板焊接在铜法兰上,为机械保护,用硅胶附着塑料帽。MOSFET晶体管芯片贴装在金属上,线键合至基板,并涂覆树脂。基板上的线条(最终电感)、芯片电容器和电阻器形成偏置和匹配电路。焊接在基板上的引线提供直流和射频连接。

7. 封装信息: - 封装代码为H2S,模块尺寸为66 x 21 x 9.88 mm。
RA20H8087M_10 价格&库存

很抱歉,暂时无法提供与“RA20H8087M_10”相匹配的价格&库存,您可以联系我们找货

免费人工找货