RA30H2127M_10

RA30H2127M_10

  • 厂商:

    MITSUBISHI(三菱)

  • 封装:

  • 描述:

    RA30H2127M_10 - 210-270MHz 30W 12.5V, 2 Stage Amp. For MOBILE RADIO - Mitsubishi Electric Semiconduc...

  • 详情介绍
  • 数据手册
  • 价格&库存
RA30H2127M_10 数据手册
Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RA30H2127M BLOCK DIAGRAM 2 3 RoHS Compliance , 210-270MHz 30W 12.5V, 2 Stage Amp. For MOBILE RADIO DESCRIPTION The RA30H2127M is a 30-watt RF MOSFET Amplifier Module for 12.5-volt mobile radios that operate in the 210- to 270-MHz range. The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (VGG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output power and drain current increase as the gate voltage increases. With a gate voltage around 4V (minimum), output power and drain current increases substantially. The nominal output power becomes available at 4.5V (typical) and 5V (maximum). At VGG=5V, the typical gate current is 1 mA. This module is designed for non-linear FM modulation, but may also be used for linear modulation by setting the drain quiescent current with the gate voltage and controlling the output power with the input power. FEATURES • Enhancement-Mode MOSFET Transistors (IDD≅0 @ VDD=12.5V, VGG=0V) • Pout>30W, ηT>40% @ VDD=12.5V, VGG=5V, Pin=50mW • Broadband Frequency Range: 210-270MHz • Low-Power Control Current IGG=1mA (typ) at VGG=5V • Module Size: 66 x 21 x 9.88 mm • Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output power with the input power 1 4 5 1 2 3 4 5 RF Input (Pin) Gate Voltage (VGG), Power Control Drain Voltage (VDD), Battery RF Output (Pout) RF Ground (Case) PACKAGE CODE: H2S RoHS COMPLIANCE • RA30H2127M-101 is a RoHS compliant products. • RoHS compliance is indicate by the letter “G” after the Lot Marking. • This product include the lead in the Glass of electronic parts and the lead in electronic Ceramic parts. How ever ,it applicable to the following exceptions of RoHS Directions. 1.Lead in the Glass of a cathode-ray tube, electronic parts, and fluorescent tubes. 2.Lead in electronic Ceramic parts. ORDERING INFORMATION: ORDER NUMBER RA30H2127M-101 SUPPLY FORM Antistatic tray, 10 modules/tray RA30H2127M 24 Jun 2010 1/9 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Silicon RF Power Semiconductors RoHS COMPLIANCE RA30H2127M RATING 17 6 100 45 -30 to +110 -40 to +110 UNIT V V mW W °C °C MAXIMUM RATINGS (Tcase=+25°C, unless otherwise specified) SYMBOL PARAMETER VDD VGG Pin Pout Tcase(OP) Tstg Drain Voltage Gate Voltage Input Power Output Power Operation Case Temperature Range Storage Temperature Range f=210-270MHz, ZG=ZL=50Ω CONDITIONS VGG
RA30H2127M_10
物料型号: - 型号:RA30H2127M

器件简介: - RA30H2127M是一款30瓦的射频MOSFET放大器模块,适用于12.5伏特的移动无线电设备,工作频率范围为210至270MHz。该模块可以直接将电池连接到增强型MOSFET晶体管的漏极。在没有栅极电压(V_GG=0V)时,漏极和RF输入信号的电流非常小,信号衰减高达60dB。随着栅极电压的增加,输出功率和漏极电流增加。在栅极电压约为4V(最小)时,输出功率和漏极电流显著增加。在4.5V(典型)和5V(最大)时,可以获得标称输出功率。在V_GG=5V时,典型的栅极电流为1mA。

引脚分配: - RF输入(P_in) - 栅极电压(V_GG),功率控制 - 漏极电压(VDD),电池 - RF输出(P_out) - RF地(Case)

参数特性: - 工作频率范围:210-270MHz - 输出功率:30W - 总效率(η_T):在VDD=12.5V和VGG=5V,输入功率为50mW时大于40% - 第二次谐波(2fo):-25dBc - 输入电压驻波比(VSWR):3:1 - 栅极电流(I_GG):在VGG=5V时为1mA

功能详解: - 该模块设计用于非线性FM调制,但也可以通过设置栅极电压来控制漏极静态电流,并用输入功率控制输出功率,从而实现线性调制。

应用信息: - 适用于12.5V移动无线电设备,工作在210-270MHz频段。

封装信息: - 封装代码:H2S - 模块尺寸:66 x 21 x 9.88 mm
RA30H2127M_10 价格&库存

很抱歉,暂时无法提供与“RA30H2127M_10”相匹配的价格&库存,您可以联系我们找货

免费人工找货