RD05MMP1

Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RD05MMP1 (a) 0.2+/-0.05 0.65+/-0.2 (c) (b) 7.0+/-0.2 (b) 8.0+/-0.2 6.2+/-0.2 5.6+/-0.2 4.2+/-0.2 RoHS Compliance, Silicon MOSFET Power Transistor, 941MHz, 5.5W DESCRIPTION RD05MMP1 is a MOS FET type transistor specifically designed for UHF RF power amplifiers applications. (3.6) OUTLINE DRAWING (d) FEATURES •High power gain: Pout>5.5W, Gp>8.9dB@Vdd=7.2V,f=941MHz •High Efficiency: 43%min. (941MHz) •No gate protection diode INDEX MARK [Gate] (4.5) 0.95+/-0.2 2.6+/-0.2 TOP VIEW DETAIL A SIDE VIEW 1.8+/-0.1 BOTTOM VIEW Terminal No. (a)Drain [output] (b)Source [GND] (c)Gate [input] (d)Source APPLICATION SIDE VIEW Standoff = max 0.05 For output stage of high power amplifiers in 941MHz band mobile radio sets. 0.7+/-0.1 UNIT:mm DETAIL A NOTES: 1. ( ) Typical value RoHS COMPLIANT RD05MMP1 is a RoHS compliant product. RoHS compliance is indicating by the letter “G” after the Lot Marking. This product includes the lead in high melting temperature type solders. However, it applicable to the following exceptions of RoHS Directions. 1.Lead in high melting temperature type solders (i.e. tin-lead older alloys containing more than85% lead.) ABSOLUTE MAXIMUM RATINGS (Tc=25°C UNLESS OTHERWISE NOTED) SYMBOL VDSS VGSS Pch Pin ID Tch Tstg Rth j-c PARAMETER Drain to source voltage Gate to source voltage Channel dissipation Input Power Drain Current Junction Temperature Storage temperature Thermal resistance CONDITIONS Vgs=0V Vds=0V Tc=25°C Zg=Zl=50Ω Junction to case RATINGS 40 -5 to +10 73 1.4 3 150 -40 to +125 1.7 UNIT V V W W A °C °C °C/W Note: Above parameters are guaranteed independently. ELECTRICAL CHARACTERISTICS (Tc=25°C, UNLESS OTHERWISE NOTED) SYMBOL IDSS IGSS VTH Pout ηD PARAMETER Zero gate voltage drain current Gate to source leak current Gate threshold Voltage Output power Drain efficiency CONDITIONS VDS=17V, VGS=0V VGS=10V, VDS=0V VDS=12V, IDS=1mA f=941MHz , VDD=7.2V Pin=0.7W,Idq=1.0A VDD=9.5V,Po=5.5W(Pin Control) f=941MHz,Idq=1.0A,Zg=50Ω Load VSWR=20:1(All Phase) MIN 0.5 5.5 43 LIMITS TYP MAX. 10 1 2.5 6 No destroy UNIT uA uA V W % - VSWRT Load VSWR tolerance Note : Above parameters , ratings , limits and conditions are subject to change. RD05MMP1 17 Aug 2010 1/9 Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RD05MMP1 Vgs-Ids CHARACTERISTICS Ta=+25°C Vds=10V Ids RoHS Compliance, Silicon MOSFET Power Transistor, 941MHz, 5.5W TYPICAL CHARACTERISTICS 60 CHANNEL DISSIPATION Pch(W) , 50 40 30 20 10 0 0 40 80 120 160 AMBIENT TEMPERATURE Ta(deg:C.) 200 Free Air On PCB with Termal sheet and Heat-sink CHANNEL DISSIPATION VS. AMBIENT TEMPERATURE *PCB: Glass epoxy (t=0.8 mm) Thermal sheet: GELTEC COOH-4000(0.5) 8 6 Ids(A),gm(S) 4 GM 2 0 0 1 2 3 Vgs(V) 4 5 Vds-Ids CHARACTERISTICS 9 Ta=+25°C Vgs=5.0V Vds VS. Ciss CHARACTERISTICS 160 140 Vgs=4.5V Ta=+25°C f=1MHz 8 7 6 Ids(A) 5 4 3 2 1 0 0 1 2 3 4 5 Vds(V) 6 7 8 9 Vgs=3.0V Vgs=3.5V Vgs=4.0V 120 Ciss(pF) 100 80 60 40 20 0 0 5 10 Vds(V) 15 20 Vds VS. Coss CHARACTERISTICS 160 140 120 Coss(pF) Crss(pF) 100 80 60 40 20 0 0 5 10 Vds(V) 15 20 Ta=+25°C f=1MHz Vds VS. Crss CHARACTERISTICS 20 18 16 14 12 10 8 6 4 2 0 0 5 10 Vds(V) 15 20 Ta=+25°C f=1MHz RD05MMP1 17 Aug 2010 2/9 Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RD05MMP1 Pin-Po CHARACTERISTICS @f=941MHz 80 Ta=25°C f=941MHz Vdd=7.2V Idq=1.0A ηd RoHS Compliance, Silicon MOSFET Power Transistor, 941MHz, 5.5W TYPICAL CHARACTERISTICS Pin-Po CHARACTERISTICS @f=941MHz 20 40 Po(dBm) , Gp(dB) , Idd(A) Ta=+25°C f=941MHz Vdd=7.2V Idq=1.0A Po 80 15 Pout(W) , Idd(A) 60 ηd(%) ηｄ 70 60 50 30 20 Gp 40 10 Po 40 30 10 Ｉｄｄ 20 5 Idd 20 10 0 1.5 0 5 10 15 20 25 Pin(dBm) 30 35 0 0 0.0 0.5 Pin(W) 1.0 Vdd-Po CHARACTERISTICS @f=941MHz 10 Ta=25°C f=941MHz Pin=0.7W Idq=1.0A Zg=ZI=50 ohm Po Vgs-Ids CHARACTORISTICS 2 5 8 Vds=10V Tc=-25~+75°C 6 Ids(A),gm(S) -25°C +25°C +75°C 8 6 4 3 Po(W) Idd(A) 4 4 2 Idd 2 1 2 0 4 6 8 Vdd(V) 10 12 0 0 0 1 2 Vgs(V) 3 4 5 RD05MMP1 17 Aug 2010 3/9 ηd(%) Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RD05MMP1 RoHS Compliance, Silicon MOSFET Power Transistor, 941MHz, 5.5W TEST CIRCUIT (f=941MHz) Vgg Vdd C1 W 19mm RD05MMP1 941MHz 4.7K Ohm RF-in 130pF 1pF 12pF* 8mm 20mm 3mm 4mm 0.5mm 9pF 19mm W C2 22uF,50V 9pF L 12mm 6mm 2pF* RF-out 130pF 21mm 2pF* Note:Board material= Teflon Substrate Micro strip line width=2.2mm/50OHM,er=2.6,t=0.8mm W:Line width=1.0mm :Spring (gilding),X:3mm Y:2.5mm L:43.7nH,6Turns,D:0.43mm,2.46mm(outside diameter) C:GRM39, " * " Mark C;GRM708 C1,C2:100pF,1000pF in parallel RD05MMP1 17 Aug 2010 4/9 Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RD05MMP1 RoHS Compliance, Silicon MOSFET Power Transistor, 941MHz, 5.5W RD05MMP1 S-PARAMETER DATA (@Vdd=7.2V, Id=500mA) Freq. [MHz] 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 525 550 575 600 625 650 675 700 725 750 775 800 825 850 875 900 925 950 975 1000 S11 (mag) 0.841 0.845 0.846 0.848 0.848 0.852 0.858 0.861 0.866 0.872 0.877 0.878 0.880 0.886 0.891 0.897 0.900 0.904 0.905 0.907 0.913 0.918 0.920 0.920 0.925 0.925 0.927 0.931 0.929 0.936 0.936 0.935 0.935 0.933 0.938 0.943 0.943 (ang) -169.5 -171.5 -172.4 -173.3 -173.7 -174.5 -174.9 -175.2 -175.3 -175.5 -175.5 -176.2 -176.6 -177.1 -177.2 -177.2 -177.3 -177.6 -178.1 -178.6 -178.9 -178.9 -178.9 -179.1 -179.5 179.8 179.5 179.2 179.3 179.2 179.0 178.5 178.1 177.9 177.8 177.8 177.5 (mag) 7.706 6.148 5.024 4.240 3.669 3.227 2.856 2.543 2.279 2.068 1.886 1.735 1.584 1.456 1.343 1.249 1.164 1.086 1.010 0.945 0.889 0.833 0.786 0.741 0.698 0.660 0.625 0.595 0.565 0.537 0.513 0.488 0.469 0.446 0.426 0.404 0.388 S21 (ang) 82.9 78.7 75.0 72.0 69.4 66.5 63.6 60.8 58.6 56.5 54.1 51.5 49.3 47.4 45.9 44.1 42.2 40.3 38.7 37.2 35.8 34.6 33.2 31.9 30.6 29.4 28.3 27.1 26.3 25.4 24.6 23.6 22.6 21.7 20.3 20.3 19.9 (mag) 0.020 0.020 0.019 0.018 0.017 0.017 0.017 0.016 0.015 0.014 0.013 0.013 0.012 0.011 0.011 0.011 0.010 0.010 0.010 0.010 0.011 0.011 0.011 0.012 0.012 0.013 0.013 0.014 0.015 0.016 0.017 0.019 0.020 0.023 0.024 0.019 0.019 S12 (ang) -3.4 -5.0 -6.5 -6.6 -7.1 -8.5 -8.9 -8.7 -8.2 -3.2 -4.3 -3.6 -0.8 2.0 7.3 10.5 16.6 19.9 25.6 30.6 35.9 40.4 46.3 49.2 51.0 57.5 58.5 60.4 62.2 67.1 67.9 68.4 67.0 64.2 52.9 51.8 61.8 (mag) 0.806 0.817 0.810 0.817 0.822 0.835 0.841 0.838 0.840 0.849 0.858 0.868 0.869 0.868 0.874 0.880 0.886 0.893 0.893 0.897 0.901 0.908 0.911 0.909 0.915 0.916 0.917 0.921 0.925 0.924 0.923 0.921 0.922 0.919 0.906 0.920 0.933 S22 (ang) -171.5 -172.9 -174.2 -174.7 -175.0 -175.1 -175.3 -175.8 -176.2 -176.4 -176.8 -177.0 -177.4 -177.5 -177.8 -178.2 -178.7 -179.1 -179.0 -179.4 -179.9 179.6 179.2 179.0 178.6 178.4 177.9 177.4 177.0 176.7 176.6 176.3 175.5 175.0 175.4 176.6 176.0 RD05MMP1 17 Aug 2010 5/9 Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RD05MMP1 RoHS Compliance, Silicon MOSFET Power Transistor, 941MHz, 5.5W RD05MMP1 S-PARAMETER DATA (@Vdd=7.2V, Id=900mA) Freq. [MHz] 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 525 550 575 600 625 650 675 700 725 750 775 800 825 850 875 900 925 950 975 1000 S11 (mag) 0.878 0.884 0.880 0.877 0.879 0.888 0.888 0.884 0.884 0.891 0.893 0.897 0.897 0.896 0.902 0.903 0.906 0.905 0.906 0.910 0.914 0.915 0.916 0.917 0.919 0.921 0.925 0.924 0.926 0.927 0.929 0.929 0.931 0.930 0.928 0.932 0.937 (ang) -174.2 -175.6 -176.9 -177.4 -177.7 -178.2 -178.7 -179.1 -179.2 -179.6 -179.7 179.8 179.7 179.6 179.3 178.9 178.7 178.5 178.4 178.2 177.9 177.5 177.3 177.3 177.2 176.9 176.6 176.5 176.3 176.1 175.8 175.6 175.5 175.2 175.2 174.8 174.8 (mag) 7.474 6.046 4.919 4.153 3.636 3.246 2.912 2.598 2.351 2.152 1.995 1.849 1.708 1.580 1.475 1.388 1.308 1.222 1.152 1.086 1.030 0.978 0.928 0.877 0.832 0.798 0.759 0.725 0.694 0.661 0.634 0.611 0.585 0.562 0.539 0.518 0.496 S21 (ang) 85.7 81.9 78.9 77.5 76.1 73.8 71.1 69.0 67.4 66.0 64.1 62.2 60.0 58.5 57.1 55.6 53.7 52.1 50.6 49.4 48.2 46.6 45.1 43.8 43.0 41.7 40.5 39.2 38.3 37.2 36.5 35.5 34.3 33.4 32.6 31.9 31.1 (mag) 0.014 0.014 0.014 0.013 0.013 0.013 0.013 0.012 0.012 0.012 0.012 0.011 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.013 0.013 0.014 0.015 0.015 0.015 0.016 0.016 0.017 0.018 0.019 0.019 0.020 0.021 0.022 0.022 S12 (ang) 4.3 2.9 3.3 4.7 8.8 4.2 7.9 9.1 11.5 13.3 18.1 16.1 20.8 25.7 26.7 30.8 33.2 35.6 38.7 42.5 45.7 46.2 52.5 53.1 55.3 56.8 59.3 59.2 62.2 63.6 64.2 65.1 66.8 66.6 65.2 67.9 68.8 (mag) 0.869 0.865 0.865 0.872 0.873 0.875 0.874 0.869 0.872 0.882 0.884 0.886 0.883 0.883 0.886 0.892 0.893 0.894 0.896 0.898 0.902 0.906 0.906 0.906 0.905 0.908 0.911 0.916 0.916 0.921 0.918 0.917 0.921 0.923 0.928 0.930 0.926 S22 (ang) -176.3 -176.9 -177.5 -177.9 -178.3 -178.5 -178.6 -178.8 -178.9 -179.2 -179.4 -179.5 -179.3 -179.6 -179.7 180.0 179.9 179.8 179.7 179.6 179.2 179.1 179.0 179.1 178.8 178.5 178.1 177.9 178.0 178.1 177.9 177.4 177.0 176.8 176.9 177.3 177.0 RD05MMP1 17 Aug 2010 6/9 Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RD05MMP1 RoHS Compliance, Silicon MOSFET Power Transistor, 941MHz, 5.5W ATTENTION: 1.High Temperature ; This product might have a heat generation while operation,Please take notice that have a possibility to receive a burn to touch the operating product directly or touch the product until cold after switch off. At the near the product,do not place the combustible material that have possibilities to arise the fire. 2.Generation of High Frequency Power ; This product generate a high frequency power. Please take notice that do not leakage the unnecessary electric wave and use this products without cause damage for human and property per normal operation. 3.Before use; Before use the product,Please design the equipment in consideration of the risk for human and electric wave obstacle for equipment. PRECAUTIONS FOR THE USE OF MITSUBISHI SILICON RF POWER DEVICES: 1. The specifications of mention are not guarantee values in this data sheet. Please confirm additional details regarding operation of these products from the formal specification sheet. For copies of the formal specification sheets, please contact one of our sales offices. 2. RD series products (RF power transistors) are designed for consumer mobile communication terminals and were not specifically designed for use in other applications. In particular, while these products are highly reliable for their designed purpose, they are not manufactured under a quality assurance testing protocol that is sufficient to guarantee the level of reliability typically deemed necessary for critical communications elements. Examples of critical communications elements would include transmitters for base station applications and fixed station applications that operate with long term continuous transmission and a higher on-off frequency during transmitting, especially for systems that may have a high impact to society. 3. RD series products use MOSFET semiconductor technology. They are sensitive to ESD voltage therefore appropriate ESD precautions are required. 4. In the case of use in below than recommended frequency, there is possibility to occur that the device is deteriorated or destroyed due to the RF-swing exceed the breakdown voltage. 5. In order to maximize reliability of the equipment, it is better to keep the devices temperature low. It is recommended to utilize a sufficient sized heat-sink in conjunction with other cooling methods as needed (fan, etc.) to keep the channel temperature for RD series products lower than 120deg/C(in case of Tchmax=150deg/C) ,140deg/C(in case of Tchmax=175deg/C) under standard conditions. 6. Do not use the device at the exceeded the maximum rating condition. In case of plastic molded devices, the exceeded maximum rating condition may cause blowout, smoldering or catch fire of the molding resin due to extreme short current flow between the drain and the source of the device. These results causes in fire or injury. 7. For specific precautions regarding assembly of these products into the equipment, please refer to the supplementary items in the specification sheet. 8. Warranty for the product is void if the products protective cap (lid) is removed or if the product is modified in any way from it’s original form. 9. For additional “Safety first” in your circuit design and notes regarding the materials, please refer the last page of this data sheet. 10. Please refer to the additional precautions in the formal specification sheet. RD05MMP1 17 Aug 2010 7/9 Silicon RF Power Semiconductors ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RD05MMP1 RoHS Compliance, Silicon MOSFET Power Transistor, 941MHz, 5.5W Keep safety first in your circuit designs ! Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of non-flammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials - These materials are intended as a reference to assist our customers in the selection of the Mitsubishi semiconductor product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party. - Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. - All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Mitsubishi Electric Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Mitsubishi Electric Corporation by various means, including the Mitsubishi Semiconductor home page (http://www.mitsubishichips.com). - When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. - Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. - The prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole or in part these materials. - If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. - Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for further details on these materials or the products contained therein. RD05MMP1 17 Aug 2010 8/9