RM100

MITSUBISHI FAST RECOVERY DIODE MODULES RM100CA/C1A-XXF HIGH SPEED SWITCHING USE INSULATED TYPE RM100CA/C1A-XXF DC current ................................ 100A Repetitive peak reverse voltage .. 600/800/1000/1200V • trr Reverse recovery time ............. 0.8µs • Insulated Type • UL Recognized Yellow Card No. E80276 (N) File No. E80271 • IDC • VRRM APPLICATION Free wheel use, Welders OUTLINE DRAWING & CIRCUIT DIAGRAM Dimensions in mm 53.5 43.3 16 CA 5.3 R6 φ5.3 8 3–M4 33 3.5 3.5 7 24 4.5 LABEL 22 36.5 C1A 18 14 Feb.1999 MITSUBISHI FAST RECOVERY DIODE MODULES RM100CA/C1A-XXF HIGH SPEED SWITCHING USE INSULATED TYPE ABSOLUTE MAXIMUM RATINGS Symbol VRRM VDRM VR (DC) * Order made Symbol IDC IFSM I2t Tj Tstg Viso Parameter DC output current Surge (non-repetitive) forward current I2t for fusing Junction temperature Storage temperature Isolation voltage Parameter Repetitive peak reverse voltage Non-repetitive peak reverse voltage Reverse DC voltage (Tj=25°C) Voltage class 12 600 720 480 16* 800 960 640 20* 1000 1100 800 24 1200 1350 960 Unit V V V Conditions Resistive load, TC=75°C One half cycle at 60Hz, peak value Value for one cycle of surge current Ratings 100 2000 16.7 × 103 –40~150 –40~125 Unit A A A2s °C °C V N·m kg·cm N·m kg·cm g Charged part to case Main terminal screw M4 2500 0.98~1.47 10~15 1.47~1.96 15~20 90 — Mounting torque Mounting screw M5 — Weight Typical value ELECTRICAL CHARACTERISTICS Limits Symbol IRRM VFM trr Qrr Rth (j-c) Rth (c-f) *1 Parameter Repetitive reverse current Forward voltage Reverse recovery time Reverse recovery charge Thermal resistance Contact thermal resistance 20, 24 class: VR=600V Tj=150°C, VRRM applied Tj=25°C, IFM=100A, instantaneous meas. IFM=100A, di/dt=–200A/µs, VR=300/600V*1, Tj=150°C Junction to case Case to fin, conductive grease applied Test conditions Min. — — — — — — Typ. — — — — — — Max. 20 1.5 0.8 60 0.5 0.3 Unit mA V µs µC °C/ W °C/ W 12 class: VR=300V Feb.1999 MITSUBISHI FAST RECOVERY DIODE MODULES RM100CA/C1A-XXF HIGH SPEED SWITCHING USE INSULATED TYPE PERFORMANCE CURVE MAXIMUM FORWARD CHARACTERISTIC 10 3 7 5 3 2 10 2 7 5 3 2 10 1 7 5 3 2 10 0 0.4 MAXIMAM TRANSIENT THERMAL IMPEDANCE (JUNCTION TO CASE) 10 0 2 3 4 57 10 1 1.0 0.8 Tj=25°C FORWARD CURRENT (A) Zth (j-c) (°C/W) 0.6 0.4 0.2 0 10 –3 2 3 4 5 7 10 –2 2 3 4 5 710 –1 2 3 4 5 7 10 0 0.8 1.2 1.6 2.0 2.4 FORWARD VOLTAGE (V) TIME (s) RATED SURGE (NON-REPETITIVE) FORWARD CURRENT 2000 1800 REVERSE RECOVERY CHARACTERISTICS VS. FORWARD CURRENT (TYPICAL) 10 3 7 VR=300/600V 5 di/dt=–200A/µs Tj=25°C 3 2 Tj=150°C 10 2 7 5 3 2 Irr Qrr 10 1 7 5 3 2 SURGE (NON-REPETITIVE) FORWARD CURRENT (A) 1600 1000 800 600 400 200 0 1 2 3 4 5 7 10 20 30 40 5070100 10 1 10 0 trr 7 7 5 5 3 3 2 2 10 0 10 –1 10 0 2 3 4 5 7 10 1 2 3 4 5 7 10 2 2 3 4 5 7 10 3 CONDUCTION TIME (CYCLES AT 60Hz) REVERSE RECOVERY CHARACTERISTICS VS. –di/dt (TYPICAL) 10 3 7 VR=300/600V 5 IF=100A Tj=25°C 3 2 Tj=150°C 10 2 7 5 3 2 10 1 7 5 3 2 FORWARD CURRENT (A) Irr Irr (A), Qrr (µC) 10 2 7 5 3 2 10 1 trr Qrr 10 0 7 7 5 5 3 3 2 2 10 –1 10 0 10 0 2 3 4 5 7 10 1 2 3 4 5 7 10 2 2 3 4 5 7 10 3 –di/dt (A/µs) trr (µs) Feb.1999 trr (µs) 1200 Irr (A), Qrr (µC) 1400 10 2 7 5 3 2