CAM-F95

MITSUMI Camera Module Connectors CAM-F9 Series, CAM-H28 * Connectors FEATURES 1. This is a camera module connector used for cell phones, PDA, back monitors for cars, toy cameras, security cameras, etc. 2. Space-saving and low-height design adopting connectors that minimize increase in size. 3. Ability to meet a variety of requests such as those concerning the type of contact points, variations in locking mechanisms, etc. 4. A key preventing incorrect insertion helps avoid any damage due to incorrect insertion. CAM-F9 Series, CAM-H28 LIST * MODEL CAM-F91 CAM-F92 CAM-F93 CAM-F94 CAM-F95 CAM-H28 M06 6 6 20pin R41-8562A R41-8568A R41-8548A R41-8589A R41-8596A R41-9142A M07 7 7 20pin R41-8560A R41-8566A R41-8547A R41-8588A R41-8595A R41-9143A Supporting module size M08 M09 8 8 24pin 9 9 24pin R41-8559A R41-8558A R41-8565A R41-8564A R41-8546A R41-8545A R41-8587A R41-8586A R41-8594A R41-8593A R41-9144A R41-9145A M10 10 10 24pin R41-8557A R41-8563A R41-8544A R41-8585A R41-8592A R41-9146A FEATURES CAM-F91 Side contact PWB lock Side contact Module lock CAM-F92 CAM-F93 Side contact Without lock This product locks with module circuit board. This product locks with module holder. Without lock CAM-F94 Bottom contact PWB lock CAM-F95 Bottom contact Module lock CAM-H28 Bottom contact Without lock This product locks with module circuit board. This product locks with module holder. Without lock MITSUMI Camera Module Connectors SPECIFICATIONS ELECTRICAL CHARACTERISTICS Rated Voltage Rated Current Withstanding Voltage Insulation Resistance Contact Resistance 50V AC (rms) 0.5A AC 200V 50MΩ min. 40mΩ max. MATERIAL & FINISH Component Parts Housing Contact Shell Material 9T Nylon Copper Alloy Copper Alloy Finish (Black) Gold flash plating Tin reflow plating DIMENSIONS CAM-F91M06 R41-8562A Pin No.6 For insert prevention key 3 2 1 Pin No.1 For insert prevention key 0.9 ±0.1 6.1+0.1 0 3.6±0.1 8.1 Insertion direction silk print 0.8 ±0.05 Insertion direction silk print Pin No.11 X2 X2 X1 X1 3.6 ±0.1 0.1 6.1±0 0.9 ±0.1 Pin No.16 2.55 ±0.1 0.9 ±0.05 3.6 ±0.05 6.8 ±0.05 7.3 ±0.05 8.6 ±0.05 3.8 CAM-F91M10 R41-8557A Pin No.7 For insert prevention key 3 2 1 0.6 +0.1 0 0.3 X1-X1 X2-X2 Recommended PWB layout (Reference)/ (Element placement aspect) Pin No.1 For insert prevention key 0.9 ±0.1 Pin No.13 X1 X1 4.5 ±0.1 10.1+0.1 0 12.1 0.9 ±0.1 Pin No.19 2.7 ±0.1 Insertion direction silk print 0.9 ±0.05 4.5 ±0.05 0.5 ±0.05 0.9 ±0.05 4.5 ±0.05 9.3 ±0.05 10.8 ±0.05 11.3 ±0.05 12.6 ±0.05 Recommended PWB layout (Reference)/ (Element placement aspect) 4.3 0.6+0.1 0 0.3 X1-X1 X2-X2 0.8 ±0.05 X2 X2 4.5 ±0.1 10.1+0.1 0 12.1 Insertion direction silk print 0.5 ±0.05 0.9 ±0.05 3.6 ±0.05 5.7 ±0.05 8.1 Unit : mm