CIM-F22

MITSUMI SD Memory Card Connectors CIM-F22 FEATURES 1. SMT-type SD memory card connector. 2. Outstanding touch! 8mm stroke type with push-in push-out eject mechanism. 3. Card detection switch and write protect switch provided. 4.Ideal for saving space on the board! Stand-off height is only 1.8mm (connector height is ultrathin, at 2.8mm). 5. Reverse type also available. 6. Half-lock provided to prevent the card from falling out. Connectors HOW TO ORDER F22-009-21 0-A G G E1 1 2 3 4 5 6 7 8 2 3 4 5 6 7 8 9 Series No. (F22) No. of contacts (009 : 9pins) Housing material (21 : LCP resin) UL grade (0 : UL94V-0) Contact plating (A : Gold) Contact plating thickness (G : 0.3µm) Contact style (G : Angle) Package (E : Taping) ST : Standard type RT : Reverse type RB : Reverse B type 9 Supplementary symbol SPECIFICATIONS CHARACTERISTICS Rated Voltage Rated Current Withstanding Voltage Insulation Resistance Contact Resistance MECHANICAL CHARACTERISTICS Life (Matching Cycle) Card Insertion Force Eject Force Using temperature Range 10,000 times 4.9N (0.5kgf) ~9.8N (1kgf) 4.9N (0.5kgf) ~9.8N (1kgf) -25~+90°C AC 50V (rms) 0.5A 500V AC (rms) 1minute 1000MΩ min. (at 500V DC) 100mΩ max. MITSUMI SD Memory Card Connectors MATERIAL & FINISH Component Parts Housing Contact CD Switch CD · WP Switch WP Switch Wing Plate Slider Coil Spring Lock Pin Material LCP resin Copper Alloy Copper Alloy Copper Alloy Copper Alloy Copper Alloy SUS PPA resin SUS SUS Finish (Black) Gold plating Gold plating Gold plating Gold plating Gold plating (Black) - DIMENSIONS Standard type 25.2 ±0.1 12.1±0.1 0.6 1 1.5 0.2 0.2 +0.2 28.5 -0.1 13.5 12.85 ±0.1 11.05 ±0.1 9.75 ±0.1 8.03 ±0.1 5.625 ±0.1 2.5 ±0.1 5=12.5 1.5 2.7 ±0.1 0.4 1.8 #8 #7 #6 #5 #4 #3 #2 3 #1 #9 3 7.85 9.5 10 0.35 max. 12.85 11.05 9.75 8.05 5- PART WHICH IT IS IMPOSSIBLE TO MOUNT 5.63 (3) A 2.5 5=12.5 2.7 2-Ø1.6 +0.1 hole 0 CARD INSERTION DIMENSION 5.8 0.8 9.55 6.95 1.5 A(NTS) B(NTS) 10.75 7.48 4.65 Ø1.5 -0 0.1 A 13.53 20 17.6 13.53 A(NTS)NOTE2 3 12.1 25.2 10.3 10.3 1.85 0.96 21.05 1.8 20 1.65 (32.8) 3.6 0.8 2Ø 26.5 THE LOADING SURFACE OF THE CONNECTOR 0.3 Center of card insertion RECOMMENDED PWB LAYOUT(NTS) ±0.05 2.25 +0.1 0 1.56 +0.1 0 24.1+0.1 0 (0.8) STROKE (32) (5) 13.15 0 22.6 -0.1 (8.2) STROKE (41) (32.8) 0.8 (5.8) (14) 3.6 14.01 13.35 0.2 1. 2-Ø1 +0.1 hole 0 9 21.05 B 17.6 3.2 10.3 10.3 4.2 27 3 7.25 9.05 9.55 (2) 0.8 The position in set The position in closet The position in ejection Unit: mm Tolerance: ±0.3 Reverse type Ø1.5 -0 0.1 1 0.6 0.8 1.5 28.5 +0.2 -0.1 13.5 12.85 11.05 9.75 8.03 5.63 2.7 1.9 12.5 2.8 ±0.1 1.5 A(NTS) 1.5 B(NTS) 12.85 11.05 9.75 (4.6) 1.8 ±0.1 (25.75) (6.68) (7.18) 0.35 max. 3.7 4.2 (0.8) (1.4) 5.63 (2.2) 2.5 5=12.5 2.7 #9 #1 #2 #3 #4 #5 #6 #7 #8 8.05 A (3) 3 Ø1.6 Hole (2) Part which it is impossible to mount 14.01 24.9 29.9 29.4 27.6 A A(NTS) 19.33 27.6 ±0.1 26.15 ±0.1 (26.55) (27.35) >LCP< 11.4 Ø1 +0.1 0 Hole B 27 ±0.1 25.8 32.8 18±0.1 (4.7) (28.5) (3.2) (0.85) (2.2) Hole 13.35 26.5 4.7 1.5 0.96 ±0.15 Center of card insertion THE BACK SURFACE OF CONNECTOR THE LOADING SURFACE OF THE CONNECTOR THE LOADING SURFACE OF THE CONNECTOR PART WHICH IT IS IMPOSSIBLE TO MOUNT RECOMMENDED PWB LAYOUT(NTS) ±0.05 17.26 ±0.2 20.6 -0.1 -0.2 2.25 +0.1 0 1.56 +0.1 0 24.1+0.1 0 22.6 -0 0.1 (0.8) STROKE (32) (5) (8.2) STROKE (41) >LCP< >LCP< >LCP< (32.8) (5.8) 0 Ø1 -0.1 0.8 (14) 13.15 24.9 ±0.1 11.4 0.35 0.85 Ø1+0.1 0 Hole 3 Ø1.1 0.7 6.82 1.8 ±0.1 101 2-Ø2 The position in set 101 The position in closet 101 The position in ejection 101 Unit: mm Tolerance: ±0.3