CIM-G24

MITSUMI Memory Stick™ Duo Connectors CIM-G24 Series Connectors OUTLINE 1. SMT-type connector for Memory Stick Duo. 2. Equipped with push-in, push-out eject mechanism. 3. Ideal for portable devices! Ultra-thin type, only 2.3mm high. 4. Space-saving, with width of 23.5mm and length of 27.8mm (not including leads). 5. Equipped with half lock to prevent card from falling out, and full lock mechanism when coupled. *Memory StickTM is a registered trademark of SONY Corporation. Onl rtable d y 2. 3mm evices high For p o HOW TO ORDER G24-010-21 0-A G G E 1 2 3 4 56 7 8 1. Series No. (G24) 2. No. of contacts (010 : 10pins) 3. Housing material (21 : LCP resin) 4. UL grade (0 : UL94-V0) 5. Contact plating (A : Gold) 6. Contact plating thickness (G : 0.3µm) 7. Contact style (G : Angle) 8. Package (E : Taping) SPECIFICATIONS ELECTRICAL CHARACTERISTICS Rated Voltage Rated Current Withstanding Voltage Insulation Resistance Contact Resistance MECHANICAL CHARACTERISTICS Life (Matching Cycle) Card Insertion Force Eject Force Using Temperature Range 12,000 times 4.90N (0.5kgf)~8.83N (0.9kgf) 4.90N (0.5kgf)~8.83N (0.9kgf) -25~+60°C max. 95% AC 50V (rms) 0.5A 500V AC (rms) 1minute 1000MΩ min. (Initial 500V DC) 40mΩ max. MITSUMI Memory Stick™ Duo Connectors MATERIAL & FINISH Component Parts Housing Contact Plate Half Lock Slider Coil Spring Lock Pin Lock Spring Shaft Material LCP resin Copper Alloy Copper Alloy SUS PA9T resin SUS SUS SUS SUS Finish (Black) Gold plating (Black) - DIMENSIONS CIM-G24 Series 22.8 ±0.1 2 ±0.1 8.05 ±0.1 2 ±0.1 2 ±0.1 2.31 ±0.2 1.5 ±0.1 27.8 ±0.2 2.3 +0.05 -0.1 R0.25 2-Ø1.6 +0.1 0 0.7 +0.1 0 #10 CONTACT No. 2.7 ±0.05 1.8 ±0.05 2.5 ±0.05 13.5 ±0.1 1.11 20.08 ±0.05 23.5 ±0.2 21±0.1 22.8 ±0.05 #1 ø1.5 ±0.1 8.05 ±0.05 0.7-0 0.1 0.65 ±0.05 23.25 ±0.1 RECOMMENDED PWB LAYOUT 1 (32.8) The position in insertion (1) (5) The position in closet The position in ejection Unit : mm 3.2 ±0.05 9.125 ±0.01 1.6 +0.1 0 2.1+0.1 0 3 +0.1 0 21 ±0.05 13.5 ±0.1 1.5 ±0.1