MM1065GT

MITSUMI Ultra-Low Power Consumption Low-Saturation Three-Pin Regulators with On/Off Pin MM1065 and 1165 Ultra-Low Power Consumption Low-Saturation Three-Pin Regulators with On/Off Pin Monolithic ICs MM1065 and 1165 Outline These ICs are stabilized power supply devices with ultra-low consumption currents, designed for a greatly reduced reactive current at low input voltages, and with a small input/output difference voltage of 0.2V at an output current of 40mA. The output current is limited to a maximum of 100mA, and in the MMP-4A package, an on/off pin enables the device to be switched on and off. Features 1. Input/output voltage difference 2. No-load input current 3. Maximum reactive current at low input voltages 4. Maximum output current 5. Temperature coefficient of output voltage 6. Output voltage ranks 0.2V typ. (IO=40mA) 13µA typ. 15µA typ. (no-load) 100mA max. ±0.01%/°C typ. MM1065, 1165 F : 6.0V±4% G : 5.0V±4% H : 4.5V±4% I : 4.0V±4% J : 3.0V±4% Z : 3.3V±4% 7. With overcurrent protection circuit 8. With thermal shutdown circuit 9. With function to turn output on and off (MMP-4A package only) On/Off Pin Level MM1065 output MM1165 output Low ON OFF High OFF ON Package TO-92A (MM1065 T, MM1165 T) MMP-4A (MM1065 M, MM1165 M) The output voltage rank appears in the boxes. * Applications 1. Handheld computers 2. Portable transceivers 3. Cordless phones 4. Other portable equipment which uses batteries MITSUMI Ultra-Low Power Consumption Low-Saturation Three-Pin Regulators with On/Off Pin MM1065 and 1165 Absolute Maximum Ratings Item Operating temperature Storage temperature Power supply current Output current Symbol TOPR TSTG VCC max. IOUT Pd 300 (TO-92A) Ratings -20~+75 -40~+125 -0.3~10 100 200 (MMP-4A) Maximum Ratings mW Units °C °C V mA Electrical Characteristics Item Symbol Measurement conditions F G VIN=Vo+1V Output voltage Vo Io=40mA I J Z No-load input current Minimum I/O voltage difference Input fluctuation rate Load fluctuation rate Output voltage temperature coefficient Iccq1 Vd min. V2 V1 Vo/T RR f=120Hz, Io=40mA VIN=Vo+1V, Io=0mA VIN=Vo min., Io=40mA VIN=(Vo+1V)~10V, Io=40mA VIN=Vo+1V, Io=0~100mA Tj=-20~+75°C VRIPPLE=1V, VIN=Vo+2V Ripple rejection rate 50 60 dB 3.84 2.88 3.17 4.00 3.00 3.30 13 0.2 4.16 3.12 3.43 20 0.3 µA V %/V H Min. Typ. Max. Units 5.76 4.80 4.32 6.00 5.00 4.50 6.24 5.20 4.68 V ±0.01 ±0.1 ±0.01 ±0.03 %/mA ±100 ppm/°C MITSUMI Ultra-Low Power Consumption Low-Saturation Three-Pin Regulators with On/Off Pin MM1065 and 1165 Equivalent Circuit Diagram Electrical Characteristics Item (MMP-4P) Symbol Iccq2 MM1165 MM1065 IOFF MM1165 V(ON/OFF)=0.4V 0.2 0.1 µA Measurement conditions MM1065 VIN=6V V(ON/OFF)=High VIN=6V V(ON/OFF)=Low V(ON/OFF)=2.4V Min. Typ. Max. Units 2.5 3 4 7 6 7 µA µA µA Input current while off On/off pin current while off On/off pin level On/off pin high level On/off pin low level High Low 2.4 -0.3 VIN +0.3 0.4 V V Basic Circuit Connection Diagram > C1 = 1µF (ceramic) [ C2 = 1µF (ceramic) > On/Off Pin Level MM1065 output MM1165 output Low ON OFF High OFF ON MITSUMI Ultra-Low Power Consumption Low-Saturation Three-Pin Regulators with On/Off Pin MM1065 and 1165 Characteristics I/O voltage difference VIN=4.6V 25 No-load input current IO=0mA I/O voltage difference (mV) 300 Reactive current (µA) 0 20 40 60 80 100 400 20 15 200 10 5 100 0 2 4 6 8 10 Output current (mA) Input voltage (V) Load fluctuation rate VIN=6V Input fluctuation rate IO=40mA Input fluctuations (mV) Load fluctuation (mV) 10 4 0 2 -10 0 -20 -2 0 20 40 60 80 100 6 7 8 9 10 11 Output current (mA) Input voltage (V) Output voltage characteristic 10 8 IO=40mA Output voltage temperature characteristic VIN=6V, IO=40mA 5.05 Output voltage (V) Output voltage (V) 6 4 5.00 4.95 2 4.90 0 2 4 6 8 10 -25 0 25 50 75 100 Input voltage (V) Temperature (°C) MITSUMI Ultra-Low Power Consumption Low-Saturation Three-Pin Regulators with On/Off Pin MM1065 and 1165 Load transient response VIN=6V Transient response to input fluctuation IO=40mA Output voltage (mV) 50 0 Output voltage (mV) Input voltage (V) 0 0.5 1.0 1.5 2.0 2.5 50 0 -50 8 6 -50 Output current (mA) 50 0 0 0.1 0.2 0.3 0.4 0.5 Time (mS) Time (mS) Allowable loss 500 Ripple rejection rate VIN=7V, Vr=1V, IO=40mA Allowable loss (mW) 400 300 TO-92 200 MMP-4 100 0 -25 Ripple rejection rate (dB) Mounted on MMP-4 printed circuit board 50 75 1t (mm) phenol 80 60 40 20 0 25 50 75 100 125 0 10 100 1K 10K 100K Temperature (°C) Frequency (Hz) Thermal shutdown 10 VIN=6V Output current characteristic 10 8 VIN=6V Output voltage (V) 8 6 4 2 0 Output voltage (V) 25 50 75 100 125 150 6 4 2 Temperature (°C) 0 40 80 120 160 200 Output current (mA)