D Series
Ο HC-49/S SMD Crystal
Ο 3rd Lead Ground Option Available
Ο Wide Frequency Range
Ο Fundamental or 3rd OT AT Cut
Frequency Range
3.200MHz to 80.000MHz
Frequency Tolerance / Stability
(See Part Number Guide for Options)
Operating Temperature Range
(See Part Number Guide for Options)
Storage Temperature
-55°C to +125°C
Aging
±5ppm / first year Max
Shunt Capacitance
7pF Max
Load Capacitance
20pF Standard
(See Part Number Guide for Options)
Equivalent Series Resistance
See ESR Chart
Mode of Operation
See ESR Chart
Drive Level
Revised S: 10/23/17
1mW Max
Page 2 of 8
www.mmdcomp.com
D Series
ESR Chart
Frequency Range
ESR (Ohms)
Mode / Cut
3.200MHz to 3.999MHz
150 Max
Fund / AT
4.000MHz to 4.999MHz
120 Max
Fund / AT
5.000MHz to 5.999MHz
100 Max
Fund / AT
6.000MHz to 7.999MHz
90 Max
Fund / AT
8.000MHz to 9.999MHz
70 Max
Fund / AT
10.000MHz to 11.999MHz
50 Max
Fund / AT
12.000MHz to 14.999MHz
50 Max
Fund / AT
15.000MHz to 19.999MHz
40 Max
Fund / AT
20.000MHz to 33.000MHz
30 Max
Fund / AT
24.576MHz to 29.999MHz
100 Max
3rd OT / AT
30.000MHz to 80.000MHz
80 Max
3rd OT / AT
Part Number
Revised S: 10/23/17
Page 3 of 8
www.mmdcomp.com
D Series
Mechanical Details
Tape & Reel
PITCH
TAPE WIDTH
REEL DIA
COUNT.
12.00 [0.628]
24.00 [0.945]
330 [13]
1000
Notes: UNLESS OTHERWISE SPECIFIED
1. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8mm through 200mm Embossed Carrier Tapping and 8mm and 12mm
Punched Carrier Tapping of Surface Mount Components for Automatic Handling.
2. Dimensions are in millimetres.
3. Tolerances are ±0.1 [0.004] mm unless otherwise specified.
4. Do not scale drawing.
Revised S: 10/23/17
Page 4 of 8
www.mmdcomp.com
D Series
3rd Lead Mechanical Details
3rd Lead Tape & Reel Dimensions
PITCH
TAPE WIDTH
REEL DIA
COUNT.
12.00 [0.471]
24.00 [0.942]
330 [13.0]
1000 pcs
NOTES: UNLESS OTHERWISE SPECIFIED
5. Applicable Standards / Specifications
ANSI Y14.5M, Dimensions and Tolerances
EIA-481-B, 8mm through 200mm Embossed Carrier Tapping and 8mm and 12mm
Punched Carrier Tapping of Surface Mount Components for Automatic Handling.
6. Dimensions are in millimetres.
7. Tolerances are ±0.10 [0.004] mm unless otherwise specified.
8. Do not scale drawing.
Revised S: 10/23/17
Page 5 of 8
www.mmdcomp.com
很抱歉,暂时无法提供与“DF18CC1-5.000MHZ-T”相匹配的价格&库存,您可以联系我们找货
免费人工找货