MKP5025A

MKP, MKL, and MKV Series Industry Standard Package Wide Frequency Range Tape and Reel Available 1 pSec Jitter ELECTRICAL SPECIFICATION: LVPECL PECL 70.000MHz to 622.080MHZ (See Part Number Guide for Options) (See Part Number Guide for Options) -55°C to +125°C ±5 ppm / yr max 1.43V typ Vdd – 1.620 VDC max Vdd – 1.620 VDC max 1.10V typ Vdd- 1.025 vdc min Vdd- 1.025 vdc min 50 mA max 50 mA max N/A 60 mA max 60 mA max N/A N/A N/A 140 mA max (See Part Number Guide for Options) 2nSec max 50 Ohms into Vdd-2.00 VDC 10mSec max 1 pSec Vih = 70% of Vdd min to Enable Output Vil = 30% max or grounded to Disable Output (High Impedance) LVDS Frequency Range Frequency Stability* Operating Temp.Range Storage Temp. Range Aging Logic “0” Logic “1” 2.5VDC ± 5% 3.3VDC ± 5% 5.0VDC ± 5% Symmetry (50% of waveform) Rise / Fall Time (20% to 80%) Load Start Time Jitter (RMS) Supply Voltage (Vdd) Supply Current Tri-State Operation * Inclusive of Temp., Load, Voltage and Aging MECHANICAL DIMENSIONS: 10.16 [.400] 6.10 [.240] 0.79 [.031] 2.54 [.100] 3 2 1 1.02 [.040] 1.27 [.050] 1.52 [.060] DIMENSION IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED UNIT IS NOT HERMETICALLY SEALED 2.54 [.100] RECOMMENDED LAND PATTERN 4 5 6 7.11 [.280] 6.35 [.250] PIN PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 CONNECTIONS NO CONNECTION TRI-STATE CASE GROUND OUTPUT COMPL. OUTPUT SUPPLY VOLTAGE 14.73 [.580] 5.08 [.200] PART NUMBERING GUIDE: MK 6 Pad SMD Frequency Output P = PECL L = LVPECL V = LVDS Supply Voltage 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Frequency Stability 010 = ±10 ppm 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Value Added Options Operating Temperature Blank = 0°C to +70°C 48 = -40°C to +85°C Symmetry Blank = 40%/60% A = 45%/55% Blank = Bulk T = Tape and Reel Please check with factory for availability of Tape and Reel Please Consult with MMD Sales Department for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MKP020508E