MSH305048AH-50.000MHZ-T

MSH Series Ο Low Profile Ceramic SMD Package Ο Hermetically Sealed Ο Tristate Function/Standby Option Ο Wide Frequency Range Electrical Specifications: Frequency Range 1.544MHZ to 70.000MHZ 1.544MHZ to 110.000MHZ Temperature Stability* (See Part Number Guide for Options) Aging (+25°C ±3°C) ±5ppm First Year Operating Temperature Range (See Part Number Guide for Options) Storage Temperature Range -55°C to +125°C Supply Voltage (±10%) +1.80VDC +2.50VDC +3.30VDC 1.544MHZ to 9.999MHZ 10mA max 12mA max 14mA max 10.000MHZ to 35.999MHZ 12mA max 14mA max 16mA max Supply Current 36.000MHZ to 49.999MHZ 15mA max 20mA max 25mA max 50.000MHZ to 110.000MHZ 25mA max 30mA max 35mA max Standby Current (With Stand-by Option) 100µA VOH = 70% of Vdd min or No Connection to Enable Output Tristate VOL = 30% of Vdd max or grounded to Disable Output (High Impendence) Logic “0” 10% Vdd max Logic “1” 90% Vdd min Output Type HCMOS Symmetry (50% of waveform) (See Part Number Guide for Options) Rise/Fall Time (10% to 90% of Supply Voltage) 5nSEC 6nSEC 7nSEC Load 15pF Start-up Time 2mSec max * Inclusive of Temperature. Load and Voltage. Mechanical & Environmental Detail Marking Detail Humidity 85% RH, 85°C, 48 Hours Hermetic Seal Leak Rate 5 X 10-8 ATM cc/s He Solderability MIL-STD-202G, Method 208 Reflow Solderability Vibration 260°C for 10 seconds First Line = MXX.XX (not to exceed 5 characters) M = MMD XX.XX = Device Frequency (four digits including decimal point) MIL-STD-202G, Method 204 35G, 50 to 2000 Hz MIL-STD-202G, Method 203 Test Cond E, 1000G’s, ½ Sinewave Available with Level B Screening Second Line = SYWWL or SSYWWL (not to exceed 6 characters) S or SS = Internal Code YWW = Date Code (Year/Week) L = RoHS Compliant Shock MIL-STD-883 Revised M: 03/08/2021 Page 2 of 6 www.mmdcomp.com MSH Series Part Number Guide Value Added Options Blank = No Added Options T3 = Tape and Reel 3k pcs/reel PLEASE CONSULT WITH MMD SALES DEPARTMENT FOR ANY OTHER PARAMETERS OR OPTIONS Mechanical Details Pin Connections Pin 1 Tri-state, Standby or No Connection Pin 2 Case Ground Pin 3 Output Pin 4 Supply Voltage Notes: 1. 2. 3. Suggest Land Pattern Dimension in brackets are in inches. An External Bypass Capacitor is recommended. Pads Plating Base or under conductor Ni thickness; 1.3 um to 8.8 um Final plating; Au (99.9) less than 0.5 um, 0.3 um typ Tape & Reel Dimensions Pitch Tape Width Reel DIA Count Pin 1 Orient Revised M: 03/08/2021 4.00 [0.157] 8.00 [0.315] 180 [7.0] 3000 Q1 Page 3 of 6 Notes: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8mm through 200mm Embossed Carrier Tapping and 8mm and 12mm Punched Carrier Tapping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimetres [inch]. 3. Tolerances are ±0.1 [0.004] mm unless otherwise specified. 4. Do not scale drawing. www.mmdcomp.com