MTAH510CM

MTAH, MTAS, and MTAZ Series Industry Standard Package +3.30VDC or +5.00VDC RoHS Compliant Available Up to 800.000MHZ ELECTRICAL SPECIFICATIONS: Output Frequency Range Load Supply Current Output Level Symmetry Freq. Stability vs Temp (Note 1) Freq. Stability vs Aging Freq. Stability vs Voltage Freq. Stability vs Load Storage Temperature Supply Voltage (Vdd) Control Voltage with VC option Pin 1 Connection No Connection VC Option Mechanical Trimmer when Specified Fund or 3rd OT PLL HCMOS Clipped Sinewave Sinewave 1.000kHZ to 180.000MHZ 1.000kHZ to 180.000MHZ 1.000kHZ to 180.000MHZ 75.000kHZ to 200.000MHZ 75.000kHZ to 800.000MHZ 75.000kHZ to 800.000MHZ 10k Ohms // 15pF 10k Ohms // 15pF 50 Ohms 35mA max 3mA max 35mA max Logic “1” = 90% of Vdd min 1.0V p-p min 0 dBm min Logic “0” = 10% of Vdd max 40%/60% at 50% of N/A N/A Waveform (See Frequency Stability vs Temperature Table) ±1 ppm per year max ±0.3 ppm with a 5% change in Vdd ±0.3 ppm with a 10% change in Load -40°C to +85°C +3.3VDC ±5% +5.0VDC ±5% +1.65VDC ±1.50VDC Positive Slope +2.50VDC ±2.00VDC Positive Slope No Connection ±10 ppm min ±3 ppm min If no mechanical trimmer is specified, trimmer may still be present depending on frequency stability option. Note 1: If no mechanical trimmer, oscillator frequency shall be ±1 ppm at +25°C ±3°C at time of shipment. PART NUMBER GUIDE: MT 14 PIN DIP TCXO Value Added Options Blank = No Added Options G = Gull-wing Supply Voltage 5 = +5.0VDC 3 = +3.3VDC RoHS Compliant Blank = Not Compliant F = is Compliant Frequency Stability 10 = ±1.0 ppm 15 = ±1.5 ppm 20 = ±2.0 ppm 25 = ±2.5 ppm 30 = ±3.0 ppm 50 = ±5.0 ppm Operating Temperature A = 0°C to +50°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Trimmer Option Blank = No Trimmer M = Mechanical Trimmer Pin 1 Connection Blank = N/C V = Voltage Control A FREQUENCY Series Options A = A Series (8.0 mm ht) Output H = HCMOS S = Clipped Sinewave Z = Sinewave Please Consult with MMD Sales Department for any other Parameters or Options. MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MTAH092208K FREQUENCY STABILITY vs TEMPERATURE TABLE: Code A G C D E F Stability 10 Temp ±1.0ppm 0°C TO +50°C ● 0°C TO +70°C -20°C TO +70°C -30°C TO +70°C -30°C TO +80°C -40°C TO +85°C ● = Available 15 ±1.5ppm ● ● 20 ±2.0ppm ● ● ● 25 ±2.5ppm ● ● ● ● ● 30 ±3.0ppm ● ● ● ● ● 50 ±5.0ppm ● ● ● ● ● ● = Consult with the Manufacturer MECHANICAL DIMENSIONS: 18.6 [.73] MAX 8.00 [.315] MAX 7.62 [.300] 1.00 [.039] 12.2 [.48] MAX 8 7 5.00 [.197] 2.40 [.094] DIMENSION IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED UNIT IS NOT HERMETICALLY SEALED 15.24 [.600] PIN CONNECTIONS VOLTAGE CONTROL OR NO PIN 1 CONNECTION (SEE *) PIN 7 PIN 8 PIN 14 CASE GROUND OUTPUT SUPPLY VOLTAGE (VDD) 14 7.62 [.300] 1 3.81 [.150] OPTIONAL TRIMMER 4.00 [.157] 0.50 [.020] *IF PIN 1 IS NOT CONNECTED, PIN MAY BE DELETED ENVIRONMENT / MECHANICAL: Shock Solderability Solvent Resistance Vibration MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 215 MIL-STD-883, Method 2007, Condition A PHASE NOISE: MARKING: Line 1 =MXXXXX M = MMD COMPONENTS XXXXX = Frequency in MHZ Line 2 = SYYMML S = Internal Code YYMM = 4 Digit Date Code (Year / Month) L = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Dot to denote Pin 1 10 Hz 100 Hz 1 kHz 10 kHz -65 dBc/HZ -85 dBc/HZ -115 dBc/HZ -127 dBc/HZ MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MTAH092208K