MTCHAF510CAV

MTCH, MTCS, and MTCZ Series 11.7 x 9.6 SMD Package RoHS Compliant Available Voltage Control Option Wide Frequency Range ELECTRICAL SPECIFICATIONS: Output Frequency Range Load Supply Current Output Level Symmetry Freq. Stability vs Temp (Note 1) Freq. Stability vs Aging Freq. Stability vs Voltage Freq. Stability vs Load Operature Temperature Storage Temperature Supply Voltage (Vdd) Control Voltage with VC option Pin 1 Connection No Connection VC Option Mechanical Trimmer HCMOS 10k Ohms // 15pF 50 Ohms 35mA max 25mA max Logic “1” = 90% of Vdd min 0.8V p-p min 7 dBm Logic “0” = 10% of Vdd max See Part Number Guide N/A N/A (See Frequency Stability vs Temperature Table) ±1 ppm per year max ±0.3 ppm with a 5% change in Vdd ±0.3 ppm with a 10% change in Load (See Frequency Stability vs Temperature Table) -40°C to +85°C +3.3VDC ±5% +5.0VDC ±5% +1.65VDC ±1.50VDC Positive Slope +2.50VDC ±2.00VDC Positive Slope Clipped Sinewave 9.600MHZ to 50.000MHZ 10k Ohms // 15pF 3mA max Sinewave No Connection ±10 ppm min ±3 ppm min PART NUMBER GUIDE: MT 9.6 x 11.7 SMD C Frequency Series Option C = C series (w/ trimmer) Output H = HCMOS S = Clipped Sinewave Z = Sinewave Height Option A = 3.00 [.118] max B = 5.00 [.197] max RoHS Compliant Blank = Not Compliant F = is Compliant Supply Voltage 5 = +5 VDC 3 = +3.3 VDC 2 = +2.5 VDC Packaging Blank = Bulk T = Tape and Reel Frequency Stability 10 = ±1.0 ppm 15 = ±1.5 ppm 20 = ±2.0 ppm 25 = ±2.5 ppm 30 = ±3.0 ppm 50 = ±5.0 ppm Operating Temperature A = 0°C to +50°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Pin 1 Connection Blank = No Connect V = Voltage Control Symmetry Blank = 40/60% A = 45/55% Please Consult with MMD Sales Department for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MTCH020807K FREQUENCY STABILITY vs TEMPERATURE TABLE: Code A G C D F Stability 10 Temp ±1.0ppm 0°C TO +50°C ● 0°C TO +70°C -20°C TO +70°C -30°C TO +70°C -40°C TO +85°C ● = Available 15 ±1.5ppm ● ● 20 ±2.0ppm ● ● ● 25 30 50 ±2.5ppm ±3.0ppm ±5.0ppm ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● = Consult with the Manufacturer MECHANICAL DIMENSIONS: 9.61 [.378] MAX A = 3.00 [.118] MAX B = 5.00 [.197] MAX 7.00 [.276] 8.26 [.325] PIN CONNECTIONS PIN 1 7.62 [.300] 1 1.20 [.047] TRIMMER ACCESS 1.40 [.055] DIMENSION IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED UNIT IS NOT HERMETICALLY SEALED 4 2.54 [.100] 2.54 [.100] RECOMMENDED LAND PATTERN 7.62 [.300] PIN 7 PIN 8 PIN 14 VOLTAGE CONTROL OR NO CONNECTION CASE GROUND OUTPUT SUPPLY VOLTAGE 2 11.70 [0.461] MAX 3 ENVIRONMENT / MECHANICAL: Shock Solderability Vibration MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A TAPE and DIMENSIONS: 29.1 [1.15] PHASE NOISE: 2.0 [.08] Ø13.0 [Ø.51] 330.0 [13.00] 100.0 [3.94] Ø20.2 [Ø.80] DIMENSIONS IN BRACKETS ARE IN INCHES DRAWING IS NOT TO SCALE 24.5 [.96] Ø1.5 [Ø.06] 4.0 [.16] 2.0 [.08] 1.8 [.07] 2.5 [.10] 11.5 [.45] 24.0 [.94] 12.0 [.47] 0.3 [.01] MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MTCH020807K