MTDS330D

MTDS Series – 5 x 7 Ceramic SMD TCXO Low Profile SMD TCXO Clipped Sinewave Output RoHS Compliant Low Power Consumption ELECTRICAL SPECIFICATIONS: Frequency Range Frequency Stability vs Temperature * Operating Temperature Range Storage Temperature Range Output Type Supply Voltage Supply Current Control Voltage Output Level Output Load Pin 1 No Connection Vc Option * Inclusive of Temperature., Load, Voltage and Aging 9.600MHZ to 27.000MHZ (See Frequency Stability vs Temperature Table) (See Frequency Stability vs Temperature Table) -40°C to =85°C Clipped Sinewave +3.30 VDC ±5% +5.00 VDC ±5% 2.0mA max 2.0mA max +1.65 VDC ±1.50 VDC +2.50 VDC ±2.00 VDC Positive Slope Positive Slope 0.8 Vp-p min 1.0 Vp-p min 10 kΩ // 10pF 10 kΩ // 10pF No Connection ±10 ppm min PART NUMBER GUIDE: MTD 5 x 7 SMD TCXO S Frequency Output S = Clipped Sinewave Supply Voltage 3 = +3.3 VDC 5 = +5.0 VDC Frequency Stability 15 = ±1.5 ppm 20 = ±2.0 ppm 25 = ±2.5 ppm 30 = ±3.0 ppm 35 = ±3.5 ppm 50 = ±5.0 ppm Operating Temperature A = 0°C to +50°C B = -10°C to +60°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Pin 1 Connection Blank = No Connect V = Voltage Control Packaging Blank = Bulk T = Tape and Reel Please Consult with MMD Sales Department for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MTD041907E FREQUENCY STABILITY vs TEMPERATURE TABLE: Code A G C D E F Stability 15 Temp ±1.5ppm 0°C TO +50°C ● 0°C TO +70°C -20°C TO +70°C -30°C TO +70°C -30°C TO +80°C -40°C TO +85°C ● = Available 20 ±2.0ppm ● ● 25 ±2.5ppm ● ● ● ● ● 30 35 50 ±3.0ppm ±3.5ppm ±5.0ppm ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● = Consult with the Manufacturer MECHANICAL DIMENSIONS: 7.20 [.283] MAX 2.00 [.079] MAX 5.08 [.200] 2.54 [.100] 1 5.20 [.205] MAX 4 1.00 [.039] 1.70 [.069] 8 7 5 6 5.08 [.200] PIN 1 PIN 2 TRI-STATE OR N/C GROUND OUTPUT SUPPLY VOLTAGE 2 1.70 [.067] 3 2.00 [.079] 1.80 [.071] RECOMMENDED LAND PATTERN 4.20 [.165] PIN 3 PIN 4 PIN 5-8 FACTORY TEST TERMINALS (DO NOT USE) DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED ENVIRONMENT / MECHANICAL: Shock Solderability Vibration MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A TAPE and DIMENSIONS: 2.76 [.109] 1.26 [.050] 40.16 [1.581] Ø8.19 [Ø.322] MARKING: 12.60 [.496] 13.23 [.521] DETAIL A DETAIL A Line 1 =MXXXXX M = MMD COMPONENTS XXXXX = Frequency in MHZ Line 2 = SYYMML S = Internal Code YYMM = 4 Digit Date Code (Year / Month) L = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots 120° 2.13 [.084] 12.00 [.472] Ø1.50 [Ø.059] 2.00 [.079] 4.00 [.157] 1.75 [.069] 0.30 [.012] 11.50 [.453] 12.10 [.476] 24.00 [.945] 10.20 [.402] Ø1.50 [Ø.059] DIMENSION IN BRACKETS ARE IN INCHES DRAWING NOT TO SCALE 2.20 [.087] MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MTD041907E