MTFH320A

MTFH, MTFS, and MTFZ Series Standard 14 Dip/4 Package RoHS Compliant Available Stability Available to ±1 ppm Operating Voltage +3.3VDC or +5.0VDC Wide Frequency Range ELECTRICAL SPECIFICATIONS: Output Frequency Range Load Supply Current Output Level Symmetry Freq. Stability vs Temp (Note 1) Freq. Stability vs Aging Freq. Stability vs Voltage Freq. Stability vs Load Operating Range Storage Temperature Supply Voltage (Vdd) Control Voltage with VC option Pin 1 Connection No Connection VC Option HCMOS Clipped Sinewave Sinewave 1.000MHZ to 160.000MHZ 8.000MHZ to 160.000MHZ 8.000MHZ to 160.000MHZ 10k Ohms // 15pF 10k Ohms // 15pF 50 Ohms 35mA max 3mA max 25mA max Logic “1” = 90% of Vdd min 1.0V p-p min 7 dBm Logic “0” = 10% of Vdd max 40%/60% at 50% of N/A N/A Waveform (See Frequency Stability vs Temperature Table) ±1 ppm per year max ±0.3 ppm with a 5% change in Vdd ±0.3 ppm with a 10% change in Load (See Frequency Stability vs Temperature Table) -40°C to +85°C +3.3VDC ±5% +5.0VDC ±5% +1.65VDC ±1.50VDC Positive Slope +2.50VDC ±2.00VDC Positive Slope No Connection ±10 ppm min Note 1: Oscillator frequency shall be ±1 ppm at +25°C ±3°C at time of shipment. PART NUMBER GUIDE: MT 14 pin DIP F Frequency Series Option F = F Series (w/o Trimmer) Supply Voltage 5 = +5 VDC 3 = +3.3 VDC Output H = HCMOS S = Clipped Sinewave Z = Sinewave Frequency Stability 10 = ±1.0 ppm 15 = ±1.5 ppm 20 = ±2.0 ppm 25 = ±2.5 ppm 30 = ±3.0 ppm 50 = ±5.0 ppm Operating Temperature A = 0°C to +50°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Pin 1 Connection Blank = No Connect V = Voltage Control Value Added Options G = Gull-Wing CLXXX = Cut Leads XXX = lead length code RoHS Compliant Blank = Not Compliant F = is Compliant Please Consult with MMD Sales Department for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MTFH020907F FREQUENCY STABILITY vs TEMPERATURE TABLE: Code A G C D F Stability 10 Temp ±1.0ppm 0°C TO +50°C ● 0°C TO +70°C -20°C TO +70°C -30°C TO +70°C -40°C TO +85°C ● = Available 15 ±1.5ppm ● ● 20 ±2.0ppm ● ● ● 25 30 50 ±2.5ppm ±3.0ppm ±5.0ppm ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● = Consult with the Manufacturer MECHANICAL DIMENSIONS: 20.70 [.815] MAX 7.50 [.295] 15.24 [.600] .80 [.031] 8 7 14 PIN CONNECTIONS VOLTAGE CONTROL OR PIN 1 NO CONNECTION PIN 7 CASE GROUND PIN 8 OUTPUT PIN 14 SUPPLY VOLTAGE 13.10 [.516] MAX 7.62 [.300] 1 6.35 [.250] .46 [.018] DIMENSIONS IN BRACKERS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED ENVIRONMENT / MECHANICAL: Shock Solderability Solvent Resistance Vibration Gross Leak Test Fine Leak Test MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-202, Method 215 MIL-STD-883, Method 2007, Condition A MIL-STD-883, Meth 1014, Cond C MIL-STD-883, Meth 1014, Cond A MARKING: Line 1 =MXXXXX M = MMD COMPONENTS XXXXX = Frequency in MHZ Line 2 = SYYMML S = Internal Code YYMM = 4 Digit Date Code (Year / Month) L = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 PHASE NOISE: PHASE NOISE PLOT COMING SOON MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MTFH020907F Specifications subject to change without notice Revision MTFH020907F