MTH302527S

MTH Series – 5 x 3.2 Ceramic SMD Oscillator Low Profile SMD Package Hermetically Sealed Stand-by Available Wide Frequency Range ELECTRICAL SPECIFICATIONS: Frequency Range Temperature Stability* Aging (+25°C ±3°C) Operating Temperature Range Storage Temperature Range Supply Voltage (±10%) Supply Current 1.544MHZ to 9.999MHZ 10.000MHZ to 35.999MHZ 35.000MHZ to 49.999MHZ 50.000MHZ to 133.000MHZ 1.544MHZ to 133.000MHZ (See Part Number Guide for Options) ±5ppm for first year (See Part Number Guide for Options) -55°C to +125°C +2.50 VDC +3.30 VDC 7mA 8mA 8mA 10mA 20mA 25mA 30mA 35mA HCMOS 40%/60% (45%/55% option) 6nSec max 7nSec max 15pF 10mSec max +1.80 VDC 6mA 7mA 15mA 25mA +5.00 VDC 15mA 20mA 35mA 40mA Output Type Symmetry (50% of waveform) Rise/Fall Time (10% to 90% of Supply Voltage) Load Start-up Time * Inclusive of Temperature., Load, Voltage and Aging Pin 1 Function Tri-state Operation Standby Current 5nSec max 5nSec max Vih = 70% of Vdd min to Enable Output Vil = 30% max or grounded to Disable Output (High Impedance) 10µA max MECHANICAL DIMENSIONS: 5.20 [.205] MAX 1.60 [.063] MAX 3.40 [.134] MAX 3 1.20 [.047] 2 1.20 [.047] DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED 1 1.40 [.055] RECOMMENDED LAND PATTERN 4 2.54 [.100] 2.54 [.100] PIN CONNECTIONS PIN 1 2.20 [.087] PIN 2 PIN 3 PIN 4 TRI-STATE OR STANDBY CASE GROUND OUTPUT SUPPLY VOLTAGE 1.10 [.043] PART NUMBER GUIDE: MTH H Frequency 5 x 3.2 Ceramic SMD 4 Pads Symmetry Blank = 40/60% A = 45/55% Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Pin 1 Connection H = Tri-state S = Standby Supply Voltage 5 = +5.0VDC 3 = +3.3VDC 2 = +2.5VDC 1 = +1.8VDC Frequency Stability 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Value Added Options Blank = No Added Options T = Tape and Reel Please Consult with MMD Sales Department for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision 03/01/07 I