MTH302548AH-25.000MHZ-T

MTH Series 5 x 3.2 Ceramic SMD Oscillator  Low Profile SMD Package  Hermetically Sealed  Standby & Tristate Available  Wide Frequency Range 1.000MHZ to 160.000MHZ Frequency Range Temperature Stability* Aging (+25°C ±3°C) Operating Temperature Range Storage Temperature Range Supply Voltage (±10%) 1.000MHZ to 34.999MHZ 35.000MHZ to 60.000MHZ 60.001MHZ to 99.999MHZ 100.000MHZ to 106.250MHZ 106.251MHZ to 160.000MHZ Supply Current +1.80 VDC 8mA 10mA 25mA 35mA 35mA Output Type Symmetry (50% of waveform) Rise/Fall Time (10% to 90% of Supply Voltage) Load Start-up Time Period Jitter: pk-pk Period Jitter: One Sigma Phase Jitter (12KHZ to 20MHZ) * Inclusive of Temperature., Load and Voltage Pin 1 Function 1.000MHZ to 160.000MHZ & (See Part Number Guide for Options) ±3ppm, ±5ppm for first year (See Part Number Guide for Options) -55°C to +125°C +2.50 VDC +3.30 VDC 10mA 16mA 20mA 25mA 30mA 40mA 40mA 50mA 40mA 50mA HCMOS 40%/60% (45%/55% option) 10nS max 15pF 10mSec max ±100ps max ±25ps max 1ps max 1.000MHZ to 106.250MHZ +5.00 VDC 25mA 50mA 60mA 80mA NA Vih = 70% of Vdd min to Enable Output Vil = 30% max or grounded to Disable Output (High Impedance) 10µA max Tri-state Operation Standby Current Mechanical & Environmental Detail Humidity 85% RH, 85°C, 48 Hours Leak Rate 2 X 10-8 ATM-cm3/sec max Hermetic Seal Solderability MIL-STD-202G, Method 208 Reflow Solderability 260°C for 10 seconds Vibration Shock 1.000MHZ to 160.000MHZ & MIL-STD-202G, Method 204 35G, 50 to 2000 Hz MIL-STD-202G, Method 203 Test Cond E, 1000G’s, ½ Sinewave MIL-STD-883 Available with Level B Screening Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ Line 2 = SYYWWL S = Internal Code YYWW = 4 Digit Date Code (Year / Week) L = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Revision: Subject to change without notice 120925M Pg 1 of 2 Part Number Guide Frequency MTH 5 x 3.2 Ceramic SMD 4 Pad Supply Voltage 1 = +1.8 VDC 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Symmetry Blank = 40/60% A = 45/55% Frequency Stability 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Pin 1 Connection Blank = No Connection H = Tri-State S = Stand-by Packaging Blank = Bulk T = Tape and Reel Please Consult with MMD Sales Department for any other Parameters or Options Mechanical Details Tape & Reel Dimensions MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Revision: Subject to change without notice 120925M Pg 2 of 2