MTTAS315EG

MTTAS Series – 5 x 3.2 Ceramic SMD VCTCXO Low Profile SMD Device Hermetically Sealed Tight Stability Over Temperature Low Power Consumption ELECTRICAL SPECIFICATIONS: Frequency Range 10.000MHZ to 44.545MHZ Frequency Stability vs Temperature * (See Frequency Stability vs Temperature Table) Operating Temperature Range (See Frequency Stability vs Temperature Table) Storage Temperature Range -40°C to +85°C Supply Voltage +2.50VDC +3.30VDC +5.00VDC Supply Current 2mA max Output Type Clipped Sinewave Output Level 0.8 Vp-p min Output Load 10k Ohms // 10pF Control Voltage 1.5VDC ±1.0VDC Frequency Tunning Range ±8.0ppm * Inclusive of Temperature., Load, Voltage and Aging PART NUMBER GUIDE: MTTA 5 x 3.2 Ceramic SMD S Frequency Frequency Stability 10 = ±1.0 ppm 15 = ±1.5 ppm 20 = ±2.0 ppm 25 = ±2.5 ppm 30 = ±3.0 ppm 50 = ±5.0 ppm Operating Temperature A = 0°C to + 50°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Supply Voltage Output S = Clipped Sinewave 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Pin 1 Connection Blank = No Connection G = Ground V = Voltage Control Packaging Blank = Bulk T = Tape and Reel Please Consult with MMD Sales Department for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MTTAS08/14/07E FREQUENCY STABILITY vs TEMPERATURE TABLE: Code A G C D E F Stability 10 Temp ±1.0ppm 0°C TO +50°C ● 0°C TO +70°C -20°C TO +70°C -30°C TO +70°C -30°C TO +80°C -40°C TO +85°C ● = Available 15 ±1.5ppm ● ● 20 ±2.0ppm ● ● ● ● ● 25 30 ±2.5ppm ±3.0ppm ● ● ● ● ● ● ● ● ● ● ● ● = Consult with the Manufacturer 50 ±5.0ppm ● ● ● ● ● ● MECHANICAL DIMENSIONS: 5 .20 [.2 05] MAX 1 .70 [.0 67] MA X 0.95 [.03 7] 2.90 [.11 4] 0.60 [.024 ] 3 1 .6 0 [.063] 2 1 1.27 [.05 0] D I M E N S I O N S IN B R A C K E T S A R E IN IN C H E S EXT E RN AL B YPASS C APACIT O R RECO M M EN D 0 .9 0 [.035] R E C O MME ND E D LAN D P ATTERN 4 0 .70 [.0 28] 1.50 [.05 9] 1.00 [.03 9] 2 .9 0 [.114] P IN C O NNE CT IO NS GR O U N D , N C, O R PIN 1 VO L T AG E C O NT RO L PIN 2 PIN 3 PIN 4 C ASE G R O U ND O U TPUT SU P P LY V O L T AG E 3.4 0 [.134] MA X THES E 4 P AD S A RE NO T TO BE C ON N ECTED TO AN Y EXTER N AL S O UR CES. ENVIRONMENT / MECHANICAL: Shock Solderability Solvent Resistance Vibration Gross Leak Test Fine Leak Test MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 215 MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A-2 MARKING DETAIL: Line 1 = MXXXXX M = MMD COMPONENTS XXXXX = Frequency in MHZ Line 2 = SYYMML S = Interna l Code YYMM = 4 Digit Date Code (Year / Month) L = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 TAPE and DIMENSIONS: 18.40 [.724] 13.00 [.512] 21.00 [.827] PHASE NOISE: 100.00 [3.937] 330.00 [12.992] 2.00 [.079] 12.40 [.488] 1.75 [.069] 4.00 [.157] 2.00 [.079] Ø1.50 [Ø.059] 12.00 [.472] 5.50 [.217] 5.50 [.217] 3.45 [.136] 8.00 [.315] Ø1.50 [Ø.059] MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MTTAS08/14/07E