MVBHF301027AA

MVBH Series – 8 Pin DIP HCMOS VCXO Industry Standard Package +2.5VDC, +3.3VDC, or +5.0VDC Supply Voltage HCMOS Output RoHS Compliant Available ELECTRICAL SPECIFICATIONS: Supply Voltage (Vdd) Frequency Range Frequency Stability (Inclusive of Temp., Load, Voltage and Aging) Operating Temp.Range Storage Temp. Range Supply Current Load Output Logic “0” Logic “1” Symmetry (50% of waveform) Rise / Fall Time (10% to 90%) Start Time Control Voltage Linearity Pullability +2.5VDC ±10% +3.3DC ±10% 1.000MHZ TO 220.000MHZ (See Part Number Guide for Options) (See Part Number Guide for Options) -55°C to +125°C 60mA max 30pF HCMOS 10% Vdd max 90% Vdd min 40%/60% 10nSec max 10mSec max 1.65 VDC ±1.50 VDC (See Part Number Guide for Options) (See Part Number Guide for Options) Line 1 = MXXXXX +5.0VDC ±10% 60mA max 15pF 85mA max 30pF 1.25 VDC ±1.00 VDC 2.50 VDC ±2.00 VDC ENVIRONMENTAL/MECHANICAL SPECIFICATIONS: Shock Solderability Vibration Gross Leak Test Fine Leak Test MIL-STD-883, Meth 2002, Cond MIL-STD-883, Meth 2003 MIL-STD-883, Meth 2007, Cond MIL-STD-883, Meth 1014, Cond MIL-STD-883, Meth 1014, Cond B A C A MARKING DETAIL: M = MMD COMPONENTS XXXXX = Frequency in MHZ Line 2 = SYYMML S = Interna l Code YYMM = 4 Digit Date Code (Year / Month) L = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots MECHANICAL DIMENSIONS: 12.90 [.508] MAX 5.50 [.217] MAX 5.33 [.210] 5 12.90 [.508] MAX 4 DONOTES PIN 1 .90 [.035] MAX 1 8 7.62 [.300] 7.62 [.300] PIN PIN PIN PIN PIN CONNECTIONS 1 CONTROL VOLTAGE 4 CASE GROUND 5 OUTPUT 8 SUPPLY VOLTAGE MXXXXX SYYMML XXXXX DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED PART NUMBERING GUIDE: MVB 8 Pin DIP VCXO H Frequency Supply Voltage Output H = HCMOS RoHS Compliant Blank = Not Compliant F = is Compliant 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Frequency Stability 010 = ±10 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Symmetry Blank = 40%/60% A = 45%/55% Pullability A = ±200 ppm min C = ±100 ppm min D = ±50 ppm min P = ±25 ppm min Linearity Blank = ±20% max X = ±5% max Y = ±10% max Z = ±15% max Please Consult with MMD Sales Deparment for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MVBH040808C