MVIH2025PCHT

MVIH Series – 5mm x 7mm HCMOS VCXO Hermetically Sealed Ceramic SMD Package +2.5VDC, +3.3VDC, or +5.0VDC Supply Voltage Tape and Reel Available RoHS Compliant ELECTRICAL SPECIFICATIONS: Supply Voltage (Vdd) Frequency Range Frequency Stability at +25°C Frequency Stability (Inclusive of Temp., Load, Voltage and Aging) Operating Temp.Range Storage Temp. Range Supply Current Load Output Logic “0” Logic “1” Symmetry (50% of waveform) Rise / Fall Time (10% to 90%) Start Time Control Voltage Linearity Pullability Shock Solderability Vibration Reflow Solderability Gross Leak Test Fine Leak Test +2.5VDC ±10% +3.3DC ±10% 1.544MHZ TO 180.000MHZ ±10 ppm (See Part Number Guide for Options) (See Part Number Guide for Options) -40°C to +85°C 60mA max 30pF HCMOS 10% Vdd max 90% Vdd min 40%/60% 10nSec max 10mSec max 1.65 VDC ±1.50 VDC (See Part Number Guide for Options) (See Part Number Guide for Options) MIL-STD-883, Meth 2002, Cond MIL-STD-883, Meth 2003 MIL-STD-883, Meth 2007, Cond 260°C for 10 seconds MIL-STD-883, Meth 1014, Cond MIL-STD-883, Meth 1014, Cond B A C A +5.0VDC ±10% 1.544MHZ TO 50.000MHZ 60mA max 15pF 85mA max 30pF 1.25 VDC ±1.00 VDC 2.50 VDC ±2.00 VDC ENVIRONMENTAL/MECHANICAL SPECIFICATIONS: MECHANICAL DIMENSIONS: 7.20 [.283] MAX 1.70 [.067] MAX 2.54 [.100] 2.54 [.100] 2.54 [.100] 2.54 [.100] PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN CONNECTIONS VOLTAGE CONTROL TRI-STATE OR NO CONNECTION CASE GROUND OUTPUT TRI-STATE OR NO CONNECTION SUPPLY VOLTAGE 5.20 [.205] MAX 4 3 1.30 [.051] 5 2 6 1 2.40 [.094] 4.20 [.165] 2.00 [.079] 1.40 [.055] DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR RECOMMENDED 1.80 [.071] RECOMMENDED LAND PATTERN PART NUMBERING GUIDE: MVI 5 x 7 Ceramic SM VCXO 6 Pads H Frequency Supply Voltage Output H = HCMOS 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Frequency Stability 010 = ±10 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Linearity Pullability D = ±50 ppm min P = ±80 ppm min C = ±100 ppm min Blank = ±20% max X = ±5% max Y = ±10% max Z = ±15% max Pin 2 & 5 Connection Blank = Pins 2 & 5 = N/C H = Pin 2-Tri-state, Pin 5-N/C T = Pins 2 & 5 = Tri-state Packaging Blank = Bulk T = Tape and Reel Please Consult with MMD Sales Deparment for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MVIH032807K