N2FSAB2

N Series Crystal Industry Standard Package AT and BT Cut RoHS Compliant Available Replaces MA-505 and MA-506 Resistance Weld ELECTRICAL SPECIFICATIONS: Frequency Range Frequency Tolerance / Stability Operating Temperature Range Storage Temperature Aging Shunt Capacitance Load Capacitance Equivalent Series Resistance Mode of Operation Drive Level Shock Solderability Solvent Resistance Vibration Gross Leak Test Fine Leak Test 3.200MHz to 91.730MHz (See Part Number Guide for Options) (See Part Number Guide for Options) -55°C to +125°C ±5ppm / first year max 7pF Max (See Part Number Guide for Options) See ESR Chart Fundamental, or 3rd OT 1mW Max MIL-STD-883, Meth 2002, Cond B MIL-STD-883, Meth 2003 MIL-STD-202, Meth 215 MIL-STD-883, Meth 2007, Cond A MIL-STD-883, Meth 1014, Cond C MIL-STD-883, Meth 1014, Cond A ESR CHART: Frequency Range 3.200MHz to 4.999MHz 5.000MHz to 5.999MHz 6.000MHz to 7.999MHz 8.000MHz to 8.999MHz 9.000MHz to 9.999MHz 10.000MHz to 16.999MHz 17.000MHz to 24.999MHz 25.000MHz to 36.000MHz 24.000MHz to 40.000MHz 24.000MHz to 34.999MHz 35.000MHz to 59.999MHz 60.000MHz to 91.730MHz ESR (Ohms) 200 Max 150 Max 120 Max 90 Max 80 Max 50 Max 40 Max 25 Max 80 Max 100 Max 80 Max 60 Max Mode / Cut Fund / AT Fund / AT Fund / AT Fund / AT Fund / AT Fund / AT Fund / AT Fund / AT Fund / BT 3rd OT / AT 3rd OT / AT 3rd OT / AT MECHANICAL DETAILS: N1 AND N2 = 5.00 [.197] MAX N3 AND N4 = 4.00 [.157] MAX 1.19 [.047] SQUARE CORNER DENOTES PIN 1 3.50 [.138] N1 AND N3 SERIES 4 1 9.00 [.354] 3 2 2.30 [.091] 3 2 MARKING: Line 1 = MXX.XXX Frequency in MHZ (5 XX.XXX = digits) Line 2 = ZZXXXMY N Series Identifier (N1, ZZ = N2, N3, N4) XXX = Manufacturing Identifier Date Code MY = (Month/Year) 12.50 [.492] MAX 4 9.00 [.354] 1 N2 AND N4 SERIES 4 3 2 4.85 [.191] MAX 1.30 [.051] 2.20 [.087] RECOMMENDED LAND PATTERN 1 DIMENSION IN BRACKETS ARE IN INCHES PART NUMBER GUIDE: Frequency N1, N2, N3, or N4 See Mechanical Details for pin connection and height Load Capacitance RoHS Compliant Blank = Not Compliant F = Is Compliant S = Series 20 = 20pF (Standard) XX = XXpF (8pF to 50pF) Temperature Tolerance/Stability* A = ±50 ppm / ±100 ppm B = ±30 ppm / ±50 ppm C = ±15 ppm / ±30 ppm D = ±10 ppm / ±15 ppm E = ±50 ppm / ±50 ppm T = ±5 ppm / ±10 ppm Operating Temperature A = 0°C to +70°c B = -20°C to +70°c C = -40°C to +85°c Mode of Operation 1 = Fundamental 2 = BT Fundamental 3 = 3rd Overtone Packaging Blank = Bulk T = Tape and Reel Please Consult with MMD Sales Deparment for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision N050107E