SSIC2025AH

SSI Series – 5 x 7 Spread Spectrum Clock Oscillator Wide Frequency Range Direct Drop-in Replacement EMI Reduction Oscillator RoHS Compliant ELECTRICAL SPECIFICATION: Frequency Range Center Spread Down Spread Temperature Stability (Inclusive of +25ºC ±3º C and Operating Temperature) Operating Temperature Range Storage Temperature Range Supply Voltage (Vdd) 13.000MHZ to 49.999MHZ 50.000MHZ to79.999MHZ Supply Current 80.000MHZ to 99.999MHZ 100.000MHZ to 160.000MHZ Output Type Symmetry (50% of waveform) 13.000MHZ to 49.999MHZ Rise/Fall Time (10% to 90% of 50.000MHZ to79.999MHZ Supply Voltage) 80.000MHZ to 99.999MHZ 100.000MHZ to 160.000MHZ Load Aging Spread Spectrum Modulation Tri-state Operation Tape and Reel Available 13.000MHZ to 160.000MHZ ±0.125% to ±2.00% -0.250% to -4.00% (See Part Number Guide for Options) (See Part Number Guide for Options) -55°C to +125°C +2.50 VDC ±5% +3.30 VDC ±5% 20 mA max 20 mA max 25 mA max 25 mA max 30 mA max 30 mA max 40 mA max CMOS (See Part Number Guide for Options) 10.0 nSec 5.0 nSec 8.0 nSec 4.0 nSec 5.0 nSec 3.0 nSec 4.0 nSec 15pF 50pF max ±3.0 ppm first year, ±1.0 ppm each year after Voh = 70% of Vdd min or No Connection to Enable Output Vol = 30% max or grounded to Disable Output (High Impedance) PART NUMBER GUIDE: SSI 5 X 7 Ceramic SMD C H Frequency Supply Voltage Output C = CMOS 2 = +2.50 VDC 3 = +3.30 VDC Frequency Stability 020 = ±20 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Symmetry Blank = 40/60% A = 45/55% Pin 1 Connection H = Tri-state Packaging Blank = Bulk T = Tape and Reel Please Consult with MMD Sales Department for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com In the event of conflict, the requirements of this specification shall govern. Revisions only with customer approval 1 of 2 Revision: Date: SSIC020509 A 02/06/09 Release: AWB MECHANICAL DIMENSIONS: 7.20 [.283] MAX 1.40 [.055] MAX 5.08 [.200] 5.08 [.200] MXXXXX SYYMML XXXXX 5.20 [.205] MAX 3 2 4 4.20 [.165] 1 PIN CONNECTIONS PIN 1 TRI-STATE PIN 7 CASE GROUND PIN 8 OUTPUT SUPPLY VOLTAGE PIN 14 2.00 [.079] PIN 1 INDICATOR LOCATED IN THIS AREA. 1.20 [.047] 1.40 [.055] 2.20 [.087] SUGGESTED LAND PATTERN DIMENSION IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED ENVIRONMENTAL/MECHANICAL SPECIFICATION: Shock Solderability Vibration Gross Leak Test Fine Leak Test Reflow Solder MIL-STD-883, Meth 2002, Cond MIL-STD-883, Meth 2003 MIL-STD-883, Meth 2007, Cond MIL-STD-883, Meth 1014, Cond MIL-STD-883, Meth 1014, Cond +260ºC for 10 sec max B A C A MARKING DETAIL: Line 1 = MXXXXX M = MMD COMPONENTS XXXXX = Frequency in MHZ Line 2 = SYYMML S = Internal Code YYMM = 4 Digit Date Code (Year / Month) L = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Pin 1 Indicator MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com In the event of conflict, the requirements of this specification shall govern. Revisions only with customer approval 2 of 2 Revision: Date: SSIC020509 A 02/06/09 Release: AWB