T10GC1-16.000MHZ-T

T Series Ο 3.2mm X 2.5mm SMD Ο Wide Frequency Range Ο RoHS Compliant Ο Tight Tolerance and Stability Frequency Range Electrical Specifications: 12.000MHz to 54.000MHz Frequency Tolerance / Stability (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature -40°C to +85°C Aging ±5ppm / first year Maximum Shunt Capacitance 5pF Maximum Load Capacitance (See Part Number Guide for Options) Equivalent Series Resistance (ESR) See ESR Chart Drive Level 10µW Typical / 100µW Maximum Insulation Resistance Frequency Range 500 Mega ohms Minimum at 100Vdc ESR Chart ESR (Ohms) Mode / Cut 12.000MHz to 19.999MHz 100 Max Fund / AT 20.000MHz to 29.999MHz 80 Max Fund / AT 30.000MHz to 54.000MHz 50 Max Fund / AT Revised K: 12/07/17 Page 2 of 6 www.mmdcomp.com T Series Part Number Guide Please Consult with MMD Sales Department for any other Parameters or Options Mechanical Details Pin Connections Pin 1 Crystal Pin 2 Ground Pin 3 Crystal Pin 4 Ground Notes: 1. 2. Dimension in brackets are in inches. Terminations: Au Plating 0.3 to 1.0um over A 1.27 to 8.89um Ni Plating Tape & Reel Dimensions PITCH TAPE WIDTH REEL DIA COUNT PIN 1 ORIENT Revised K: 12/07/17 4.00 [0.157] 8.00 [0.315] 180 [7.0] 1000 Q1 Page 3 of 6 Notes: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8mm through 200mm Embossed Carrier Tapping and 8mm and 12mm Punched Carrier Tapping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimetres [inch]. 3. Tolerances are ±0.1 [0.004] mm unless otherwise specified. 4. Do not scale drawing. www.mmdcomp.com