44150-0018

Category 5 High Speed Single and Ganged Modular Jacks FEATURES AND SPECIFICATIONS Molex Incorporated offers single port and ganged high speed modular jacks for applications that require Category 5 or Category 5e reliability. These high speed jacks have been tested in accordance with EIA/TIA 568B standards and meet the performance criteria of greater than -43dB Near End Cross Talk (NEXT) at 100Mbps/100MHz for Category 5e performance. Designed as an industry standard footprint and pin layout for Category 5, the RJ-45 modular jack layout is a drop in replacement for many modular jack suppliers. This provides for easy transition of the Molex Category 5 jacks to existing board layouts. Features and Benefits s Gigabit Ethernet compatible s Delivers Category 5e performance to meet Near End Crosstalk (NEXT) requirements of greater than -43dB on all pair combinations at 100Mbps/100MHz s Designed for fast Ethernet and ATM applications s Low profile allows for tight board stacking s Enhanced panel grounding tabs on shield provide a superior grounding path to panel or bracket s Housing molded in 30% glass-filled nylon to maintain dimensional integrity to +260°C processing temperature for 1 minute s 100% Hi-pot and continuity tested for electrical integrity s Traditional industry standard footprint and pin layout Enhanced tabs on the shield provide a superior ground path to the panel or metal bracket for maximum shielding effectiveness. Internal grounding tabs complete the circuit to ground in shielded cable/plug applications. Single port shields are available with two side panel grounding tabs or with one tab staggered on each side to allow for side-by-side stackability. Unshielded versions of both the single port and ganged high speed jacks are also available. Category 5 High Speed Single and Ganged Modular Jacks Applications s Network Servers s Hubs s Routers s Ethernet Switches s Broadband Equipment s Repeaters s Premise Wiring s Ethernet Telephony s ATM Transmission Equipment APPLICATIONS 2 FEATURES AND SPECIFICATIONS Features and Benefits s Exceeds Category 5 performance s Gigabit Ethernet compatible s Enclosed top s Industry Standard Footprint s Shield with enhanced panel grounding tabs s Surface Mount Compatible Reference Information Product Specification: PS-44050-003 Packaging: Tray UL File No.: E107635 CSA File No.: LR149980 Designed In: Inches Electrical Voltage: 125V Current: 1.5A Dielectric Withstanding Voltage: 1000V AC Insulation Resistance: 500 MΩ min. Mechanical Durability: 500 cycles min. Physical Hog: Black glass-filled, high temperature nylon, UL 94V-0 Plating: Contact Area—1.27µm (50µ") min. Gold Solder Tails—1.27µm (50µ") Tin/Lead On both contact area and solder tails over nickel overall Temperature: -40 to +80˚C Modular Jack 44050 High Speed, Right Angle Low Profile Shielded and Unshielded Versions ORDERING INFORMATION AND DIMENSIONS Loaded Contacts 8 8 8 8 8 Order No. Shielded Panel With All Panel Grounding Tabs With Offset Tabs Grounding Location E Location F Location E Location F 44050-0007 44050-0002 44050-0006 44050-0003 44050-0009 44050-0004 44050-0008 44050-0005 Dimension A 15.24 (.600) 15.80 (.622) 15.80 (.622) 15.80 (.622) 15.80 (.622) B 8.89 (.350) 8.89 (.350) 8.89 (.350) 8.89 (.350) 8.89 (.350) C 11.43 (.450) 11.43 (.450) 11.43 (.450) 11.43 (.450) 11.43 (.450) D 12.83 (.505) 13.08 (.515) 13.08 (.515) 13.08 (.515) 13.08 (.515) E 4.57 (.180) 3.68 (.145) 3.05 (.120) 3.05 (.120) F Circuits Unshielded 44050-0001 8 8 8 8 8 3 FEATURES AND SPECIFICATIONS s s s s s s s Modular Jack Electrical Voltage: 125V Current: 1.5A Dielectric Withstanding Voltage: 1000V AC Insulation Resistance: 500 MΩ min. Mechanical Durability: 500 cycles min. Physical Housing: Glass-filled nylon, UL 94V-0 Plating: Contact Area—1.27µm (50µ") min. Gold Solder Tails—1.27µm (50µ") Tin/Lead On both contact area and solder tails over nickel overall Temperature: -40 to +80˚C Features and Benefits Exceeds Category 5 performance Gigabit Ethernet compatible 2, 4, 6 and 8 port configurations available Shield with enhanced panel grounding tabs 100% tested for hi-pot and continuity Industry Standard Footprint High-temperature plastic Reference Information Product Specification: PS-44150-003 Packaging: Tray UL File No.: E107635 CSA File No.: LR19980 Designed In: Inches 44150 High Speed, Ganged, Right Angle, Low Profile Shielded and Unshielded Versions ORDERING INFORMATION AND DIMENSIONS C ircuits 8 8 8 8 Loaded Contacts Loaded Contacts 8 8 8 8 No. of Ports 2 4 6 8 Order No. Snap-Fit Pegs Press-Fit Pegs 44150-0001 44150-0017 44150-0002 44150-0018 44150-0003 44150-0019 44150-0004 44150-0020 A 30.48 (1.20) 58.42 (2.30) 86.36 (3.40) 114.30 (4.50) B 8.89 (.350) 8.89 (.350) 8.89 (.350) 8.89 (.350) Dimension C D 25.40 (1.00) 12.83 (.505) 53.34 (2.10) 12.83 (.505) 82.28 (3.20) 12.83 (.505) 109.22 (4.30) 12.83 (.505) Dimension B 8.89 (.350) 8.89 (.350) 8.89 (.350) 8.89 (.350) C 25.40 (1.00) 53.34 (2.10) 82.28 (3.20) 109.22 (4.30) D 13.31 (.524) 13.31 (.524) 13.31 (.524) 13.31 (.524) F 10.16 (.400) 10.16 (.400) 10.16 (.400) 10.16 (.400) G 13.97 (.550) 13.97 (.550) 13.97 (.550) 13.97 (.550) H 30.99 (1.22) 58.93 (2.32) 86.87 (3.42) 114.81 (4.52) F 10.16 (.400) 10.16 (.400) 10.16 (.400) 10.16 (.400) G 13.97 (.550) 13.97 (.550) 13.97 (.550) 13.97 (.550) Order No. Option 1* Option 2 † A Snap-Fit Pegs Press-Fit Pegs Snap-Fit Pegs Press-Fit Pegs 8 8 2 44150-0005 44150-0021 44150-0011 44150-0027 30.48 (1.20) 8 8 4 44150-0006 44150-0022 44150-0012 44150-0028 58.42 (2.30) 8 8 6 44150-0007 44150-0023 44150-0013 44150-0029 86.36 (3.40) 8 8 8 44150-0008 44150-0024 44150-0014 44150-0030 114.30 (4.50) N ote: Contact Inside Sales for alternative rear grounding tab option on 4 and 8 port order numbers only. * Dimension E = 3.68mm (.145") † D imension E = 4.57mm (.180") Circuits No. of Ports Americas Headquarters Lisle, Illinois 60532 U.S.A. Tel:1-800-78MOLEX Fax:630-969-1352 Far East North Headquarters Yamato, Kanagawa, Japan Tel:81-462-65-2324 Fax:81-462-65-2366 Far East South Headquarters Jurong, Singapore Tel:65-268-6868 Fax:65-265-6044 European Headquarters Munich, Germany Tel:49-89-413092-0 Fax:49-89-401527 Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. Tel:630-969-4550 V i si t o u r W e b si t e at h t t p:/ / www.mo l e x .co m Order No. USA-118 Printed in USA/5K/JI/JI/2000.06 © 2000, Molex