44380-0015

FEATURES AND SPECIFICATIONS Molex’s New Mini-PCI Compliant Inverted Modular Jack Offers Signal Reliability and Flexibility Molex Incorporated introduces a new right angle inverted Modular Jack that mounts to a 1.00mm (.039") thick PCB in conformance with the Mini-PCI standard. Typical applications for this modular jack are notebook computers, modems, LANs, docking stations, NetPCs, and set top boxes where space is limited. The inverted design places the terminals on the bottom of the jack providing a shorter signal path for reduced crosstalk. This design also minimizes the “Antennae” effect resulting in less noise being radiated through transmission lines. The Mini-PCI compliant jack is offered with a lightpipe option. Lightpipes replace standard LEDs used in other manufacturers’ modular jacks. The lightpipes direct the light emitted from the LEDs mounted on the PCB rather than conventional LEDs mounted in the modular jacks. This offers the ultimate in flexibility since any color or intensity SMT LED can be used. The combination of PCB mounted LEDs and lightpipes results in a reduction of LED generated noise. The inverted Mini-PCI compliant modular jacks are available in through-hole styles for wave soldering or a high temperature version for reflow soldering. The high temperature version maintains performance at a +260°C reflow soldering temperature for 1 minute without deforming the modular jack or lightpipe. Shielded and unshielded offerings are available for both RJ-11 and RJ-45 configurations for the standard through hole version, and a shielded modular jack is offered with the high temperature lightpipes. Features and Benefits s Meets the 1.00mm (.039") thick PCB requirements of the Mini-PCI standard allowing for thinner PCB for tight space applications s Plug latch on top of jack provides easy thumb depression for mating and unmating s The inverted RJ-45 lightpipe modular jack provides Category 5 performance for Fast Ethernet applications s Signal integrity remains high due to no interference from LED leads Modular Jack 44380 Right Angle, Low Profile Inverted Mini-PCI Compliant s Lightpipes reduce the electronic noise from LEDs by as much as 50% s Meets FCC 68.5 specification when plating selection is 50µ" of Gold. (30µ" and 15µ" of Gold plating are also available) s Each Molex modular jack is 100% electronically tested to detect possible shorting conditions before the product is shipped FEATURES AND SPECIFICATIONS s s s s s s s Modular Jack Electrical Voltage: 125V Current: 1.5A max. Contact Resistance: 10mΩ max. Dielectric Withstanding Voltage: 1000V AC Insulation Resistance: 500 MΩ min. Mechanical Durability: 500 Cycles Physical Housing: Black glass-filled high temperature Nylon, UL 94V-0 Plating: Contact Area—1.27µm (50µ") min. Gold Solder Tails—1.27µm (50µ") Tin/Lead on both contact area and solder tails Underplating—Nickel Operating Temperature: -40 to +80˚C Features and Benefits RJ-45 version meets Category 5 for Fast Ethernet Meets 1.00mm (.039") max. PCB requirements Plug latch on top Shortened leads with bottom contacts Lower electrical noise than LED offerings 34% fewer leads than LED offerings Surface Mount Compatible 44380 Right Angle, Low Profile Inverted Mini-PCI Compliant Reference Information Product Specification: PS-44380-0003 Packaging: Unshielded—Tube Shielded—Tray UL File No.: E107635 CSA File No.: LR19980 Mates With: FCC 68 Plugs Designed In: Inches CATALOG DRAWING (FOR REFERENCE ONLY) ORDERING INFORMATION AND DIMENSIONS Order No. C ircuits 6 6 6 8 8 Loaded Contacts 4 4 4 8 8 Lightpipes Unshielded 44380-0003 44380-0006 44380-0015 Yes Yes 44380-1010 44380-1016 * A 15.75 (.620) 16.38 (.645) 16.38 (.645) 16.38 (.645) 16.38 (.645) B 3.07 (.120) 3.07 (.120) 3.07 (.120) 7.11 (.280) 7.11 (.280) Dimension C 9.88 (.389) 9.88 (.389) 9.88 (.389) 11.91 (.469) 11.91 (.469) D 13.21 (.520) 13.53 (.533) 13.53 (.533) 13.53 (.533) 13.53 (.533) Shielded With All Panel With Offset Panel Grounding Tabs Grounding Tabs Americas Headquarters Lisle, Illinois 60532 U.S.A. Tel:1-800-78MOLEX Fax:630-969-1352 Far East North Headquarters Yamato, Kanagawa, Japan Tel:81-462-65-2324 Fax:81-462-65-2366 Far East South Headquarters Jurong, Singapore Tel:65-268-6868 Fax:65-265-6044 European Headquarters Munich, Germany Tel:49-89-413092-0 Fax:49-89-401527 Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. Tel:630-969-4550 V i si t o u r W e b si t e at h t t p:/ / www.mo l e x .co m Order No. USA-154 Printed in USA/2.5K/JI/JI/2001.04 © 2001, Molex