44661-1001

FEATURES AND SPECIFICATIONS Modular Jacks Category 5e 44661, 44560 Right Angle Compact Profile Single and Ganged Category 5e Compact Modular Jacks Provide Low Profile of 9.53mm (.375”) for Optimal Board Stacking Features and Benefits s s s s s s s s s Offers a low profile of 9.53 mm (.375”) from the top of the PCB to the top of the modular jack Available in one, two and four port configurations for multiple design options Enhanced panel grounding tabs on shielded versions offer superior ground paths to the panel or metal bezel for maximum shielding performance Snap-fit or press-fit PCB retention options for single-port versions Conforms to Compact PCI, Eurocard and Common Mezzanine Card Standards Meets Category 5e performance for Gigabit Ethernet applications High temperature material allows for Surface Mount Compatibility during solder reflow Meets FCC 68.5 specification Each modular jack is 100% electronically tested to detect possible shorting conditions before the product is shipped Molex introduces a new right angle modular jack with a profile of 9.53mm (.375”) from the top of the PCB to the top of the jack allowing for optimal board stacking. This unique design allows the bottom of the modular jack to sit flush with the bottom of the PCB, adhering to the 2mm industry specification for creepage and clearance. The compact jack is offered in one, two and four port variations to meet many design configurations. This RJ-45 jack with through-hole PCB tails features a choice of shielding options: s s s s The compact modular jack meets Category 5e performance for Gigabit Ethernet applications with near-end cross talk (NEXT) loss of 43dB at 100 MHz. The high-temperature housing material maintains performance at a +260°C reflow soldering temperature for one minute without deforming the modular jack. The compact profile of this modular jack makes it suitable for use in notebook PCs and other spaceconscious devices that call for Category 5 or 5e connection. Other applications include networking equipment such as hubs, routers and switches. The modular jack conforms to Compact PCI, Eurocard and Common Mezzanine Card Standards. Unshielded Shield with no grounding tabs Shield with enhanced grounding tabs on top and sides Shield with side bezel grounding tabs for CompactPCI applications Modular Jacks Category 5e Applications Applications for the compact modular jack include notebook computers, networking and communications equipment that require Category 5 or 5e connection reliability: s s s s s s s 44661, 44560 Right Angle Compact Profile Single and Ganged Network Servers Ethernet Switches Network Interface Cards Bridges Routers Premise Wiring Communications Equipment Ethernet Switch PMC Mezzanine Card Network Server Compact PCI Board ORDERING INFORMATION Order Number C ircuits Loaded Contacts Number of Ports 1 8 8 2 4 PCB Retention Snap-Fit Peg Press-Fit Peg Snap-Fit Peg Snap-Fit Peg Unshielded 44661-0002 44661-1002 44560-0001 44560-0003 No Ground Tabs 44661-0001 44661-1001 44560-0002 44560-0004 Shielded Enhanced Ground Tabs 44661-0011 44661-1011 44560-0012 44560-0014 Bezel Ground Tabs 44661-0021 44661-1021 44560-0022 44560-0024 Americas Headquarters Lisle, Illinois 60532 U.S.A. Tel:1-800-78MOLEX Fax:630-969-1352 Far East North Headquarters Yamato, Kanagawa, Japan Tel:81-462-65-2324 Fax:81-462-65-2366 Far East South Headquarters Jurong, Singapore Tel:65-6-268-6868 Fax:65-6-265-2985 European Headquarters Munich, Germany Tel:49-89-413092-0 Fax:49-89-401527 Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. Tel:630-969-4550 V i si t o u r W e b si t e at h t t p:/ / www.mo l e x .co m/ cat 5.h t ml Order No. USA-171 Printed in USA/5K/JI/JI/02.05 © 2002, Molex