45714-0003

FEATURES AND SPECIFICATIONS 12.90mm (.508”) Pitch Power Edge™ Power Connector 45714 Vertical Assembly, Press-Fit Tails 45719 Vertical Assembly, Solder Tails High Current Connector For Direct Mating To Card Edge PCB Or Bus Bar Tabs for Power Applications Up To 40.0A Power Edge is a high current connector for direct Gold plating, with redundant interface points for mating to a customer’s 1.58mm (.062”) thick, double- optimum mating with double-sided card edge contacts. sided card edge PCB or bus bar tab. Power Edge The Power Edge contact is rated for currents up to connectors can be combined (stacked end-to-end) to 40.0A, offering a 25% higher current rating compared mate with multiple bus bar tabs or card edges up to to competing connectors. The additional current 8.00” (203.20mm) for power distribution applications. provides the customer with an increased power or safety factor for their application. Power Edge uses The Power Edge contact incorporates proven Molex the same PCB footprint and is end-to-end stackable design elements of high performance Copper Alloy and with competing products. Features and Benefits I Connector assemblies available in two, three and four segments (two contacts per segment) provide greater flexibility for power distribution applications I End-to-end stackable segments provide greater flexibility for card edge requirements up to 203.20mm (8.00”) in length I 40.0A current rating per contact for high current requirements, 25% more current per contact than competing headers I Isolated segments on opposing contacts provide option for different power voltage levels on either side of the board; for example, ground return on one side and power return on the other side I Press-fit or solder tail terminations are compatible with standard PCB’s or Backplanes I Rated for current interruption matches true hotplugging capabilities I Compatible with competitive connector allows dropin replacement SPECIFICATIONS Reference Information Packaging: Tray UL File No.: E29179 CSA File No.: Pending TUV File No.: Pending Mates With: Customer’s .062” Thick Card Edge or Bus Bar Tab Designed In: Millimeters Electrical Voltage: 250V Current: 40.0A per contact Contact Resistance: 1 mΩ max. Dielectric Withstanding Voltage: 1500VDC Insulation Resistance: 5000 MΩ min. Mechanical Mating Force: 2 segment assembly – 22.2N 3 segment assembly – 26.7N 4 segment assembly – 35.6N Unmating Force: 2 segment assembly – 12.3N 3 segment assembly – 22.2N 4 segment assembly – 31.1N Durability: 200 mating cycles Physical Housing: 30% Glass Filled LCP Contact: Copper Alloy Plating: Contact Area – Select Gold Solder Tail Area – Tin Underplating – Nickel PCB Thickness: See ordering information Operating Temperature: -40 to 105°C 27.62mm 1.087 ” 2 Segment Power Edge Header Double-Sided Card Edge PCB Upper Contact Lower Contact 7 .87mm .310 ” 6.8mm .267 ” Copper Plating Segment PCB 12.7mm .500 ” APPLICATIONS I Telecommunications Equipment - Networking Hubs - Switches - Routers I High and Mid-Range Computing Equipment I Un-interruptible Power Supplies (UPS) I Cellular Communications Equipment - Base Stations I DC-DC Converters 12.90mm (.508”) Pitch Power Edge™ Power Connector 45714 Vertical Assembly, Press-Fit Tails 45719 Vertical Assembly, Solder Tails Power Edge Connectors Mating to Bus Bar Tabs ORDERING INFORMATION Order No. 45714-0001 45714-0002 45714-0003 45719-0001 45719-0002 45719-0003 45719-0004 45719-0005 45719-0006 45719-0007 45719-0008 45719-0009 Segments 2 3 4 2 3 4 2 3 4 2 3 4 PCB Termination Type Press Fit (Compliant Pin) Press Fit (Compliant Pin) Press Fit (Compliant Pin) Through Hole Solder Tails Through Hole Solder Tails Through Hole Solder Tails Through Hole Solder Tails Through Hole Solder Tails Through Hole Solder Tails Through Hole Solder Tails Through Hole Solder Tails Through Hole Solder Tails PCB Thickness .093” (2.36mm) or Greater .093” (2.36mm) or Greater .093” (2.36mm) or Greater .125” (3.18mm) Max. .125” (3.18mm) Max. .125” (3.18mm) Max. .093” (2.36mm) Max. .093” (2.36mm) Max. .093” (2.36mm) Max. .062” (1.57mm) Max. .062” (1.57mm) Max. .062” (1.57mm) Max. Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX amerinfo@molex.com Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 feninfo@molex.com Far East South Headquarters Jurong, Singapore 65-6-268-6868 fesinfo@molex.com European Headquarters Munich, Germany 49-89-413092-0 eurinfo@molex.com Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax:630-969-1352 Visit our Web site at http://www.molex.com/product/power/power_edge.html Order No. USA-277 Printed in USA/JI/2004.11 ©2004, Molex