46114

FEATURES AND SPECIFICATIONS EXTreme LPHPower™ Low-Profile Hybrid Power Connector 45984 Right Angle Receptacle 46114 Vertical Receptacle 45985 Right Angle Plug The EXTreme LPHPower™ Connector is a mixed, high-current power and signal connector system that picks up where traditional connectors leave off. Designed with power blades parallel to the PC board, its extremely low-profile height of only 7.50mm (.295”) allows greater system airflow while taking up 53% less space than traditional connectors with the same current rating. Designed as a new generation of power interconnect, Molex’s EXTreme LPHPower™ connector provides up to 127.0A per linear inch of space, has two isolated power blades in each housing bay and can be mated in a right angle, co-planar or vertical orientation. EXTreme LPHPower™ can be mated in a traditional two-piece connector system, or as a one-piece receptacle-to-cardedge / bus bar application. Features and Benefits n Low-profile design, 7.50mm height enhances system airflow and provides 127.0A per linear inch n Receptacle sides mates to either our standard LPH plug or an industry standard 1.57mm PBC gold finger card edge n Rated for current interruption hot-plugging requirements n Rugged signal and power contacts reduce the potential for stubbing or damage n Two isolated power contacts per housing bay (top and bottom) n Tested per EIA-364-1000.01 n Last-mate/first-break available on power contacts SPECIFICATIONS Reference Information Packaging: Tray or Tube UL File No.: E29179 CSA File No.: LR19980 TUV: 30683046.001 Designed In: Millimeters Electrical Voltage: 250V max Current (at 30° C Temperature rise): Power – 30.0A max. Signal – 1.0A max. Contact Resistance (per contact): Power (milliohms) 0.50 0.64 Signal (milliohms) 6.24 8.34 Dielectric Withstanding Voltage: 1500V Insulation Resistance: 5000 Megohms min. Current interruption: Power – 30.0A and 48V DC Signal – 1.0A at 30V ORDERING INFORMATION Series* 45984 46114, 46112, 46113 45985 Description Right Angle Receptacle Vertical Receptacle Right Angle Plug Power Circuit 4 to 10 2 to 14 4 to 10 Signal Circuit 12 to 40 12 to 40 12 to 40 Guide Optional Optional Optional Board Peg Optional N/A Optional PCB Thickness 1.57, 2.36, 6.35mm (.062, .093, .250”) 1.57mm min. (.062”) 1.57, 2.36, 6.35mm (.062, .093, .250”) Initial End of Life Mechanical Mating Force (max. per circuit): Power Contacts – 6.87N (1.54 lb) Signal Contacts – 1.08N (0.24 lb) Un-mating Force (max per circuit): Power Contacts – 5.88N (1.32 lb) Signal Contacts – 0.02N (0.03 lb) Durability: 250 cycles (Receptacle and Plug) Physical Housing: LCP Contact: Power Contacts - Copper (Cu) Alloy Signal Contacts – Phosphor Bronze Plating: Contact Area — Select Gold Solder Tail Area — Tin Underplating — Nickel Flammability Rating: UL-94V-0 Documents Sales Drawings: SD-45984-XXX, SD-45985-XXX, SD-46114-XXX, SD-46112-XXX, SD-46113-XXX Product Specs: Right Angle — PS-45984-001 Vertical — PS-46114-001 Application Tooling: Vertical ATS — 62100-6300, 62201-8671, 62201-8672 *Complete part numbers can be found at www.molex.com/link/ext-power.html FEATURES AND SPECIFICATIONS EXTreme LPHPower™ Low-Profile Hybrid Power Connector EXTreme LPHPower™ 100 90 80 70 8 Contact and 4 Contact T-Rise Current Chart 8 Contact End 8 Contact Center 4 Contact End T-Rise (Deg. C°) 60 50 40 30 20 10 0 0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 Current (Amps) EXTreme LPHPower™ Voltage Drop Vs. Current 8 Circuit and 4 Circuit 0.024 0.022 0.020 Voltage Drop - Volts (w/Bulk) 0.018 0.016 0.014 0.012 0.010 0.008 0.006 0.004 0.002 0.000 10.0 20.0 30.0 40.0 8 Circuit 4 Circuit Current (Amps) FEATURES AND SPECIFICATIONS EXTreme Power® Products EXTreme Power® Products The need for high-current power interconnect solutions in increasingly smaller space continues to rise rapidly. Solving this power equation on new architectures and system platforms has been a major focus for Molex product development teams. The new Molex EXTreme Power® family of products is the direct result of listening intently to our customers’ electrical and mechanical design challenges. Since no two applications are the same, the Molex EXTreme Power® offering is comprised of several product families that cover a wide range of current densities, mechanical envelopes, mating terminations and configuration choices that give system designers the ability to maximize their power interconnect needs. 150.0 A / Blade 372.0 A / Sq. in. 58.0 A / Sq. cm 60.0 A / Blade 705.0 A / Sq. in. 109.0 A / Sq. cm 30.0 A / Blade 431.0 A / Sq. in. 67.0 A / Sq. cm 30.0 A / Blade 203.0 A / Sq. in. 31.0 A / Sq. cm 40.0 A / Blade 445.0 A / Sq. in. 68.0 A / Sq. cm 16.0 A / Blade 618.0 A / Sq. in. 96.0 A / Sq. cm 50.0 A / Contact 215.0 A / Sq. in. 33.0 A / Sq. cm 10.00mm EXTreme Ten60Power™ EXTreme PowerEdge™ EXTreme MicroPower™ EXTreme MicroPower™ EXTreme PowerPlus™ (SSI) EXTreme LPHPower™ 4.00mm 15.00mm EXTreme PowerMass™ 14.58mm 7.50mm 10.00mm 25.00mm www.molex.com/link/ext-power.html Order No. 987650-3001 USA/KC/2009.03 © 2009, Molex