86000-0061

FEATURES AND SPECIFICATIONS Optical Break-Out Cable Assemblies Achieve up to 80% front panel space savings with multiple break-out cable assembly options Both versions of break-out assemblies provides up to Molex is a leader in providing innovative break-out cable assemblies to meet the high density 80% space savings on the front-panel and can reduce requirements of the telecommunication and the system costs by up to 25%. For example, up to 12 Small Form-factor (SFF) transceivers mounted on a datacommunication industry. The extensive line of break-out boxes, break-out tubes and MTP* break-out line card can transition to a single MTP connector mounted on the front panel, versus transitioning to 24 assemblies provides customers the flexibility to select LC connectors or 12 duplex LC connectors. the best transition method to meet their specific application while optimizing real-estate space savings. Molex’s extensive line of spliceless single fiber and ribbon fiber cable assemblies provides numerous Version 1: Break-out boxes and tubes design options. Break-outs to single-fiber leads Break-out boxes and tubes are the traditional method terminated with industry standard LC, MU, FC, SC and that allows a spliceless transition between ribbon fiber ST connectors are available to connect with the current and discrete fibers. The break-out box ensures optical installed base of transmitters, receivers and patch integrity without the use of bulky splice sleeves. panels. Break-outs to ribbon fiber leads terminated Version 2: MTP break-out connector to MTP, HBMT™ and BMTP™ connectors provide highThe MTP break-out connector eliminates the use of density panel mount and backplane solutions. break-out boxes or tubes, resulting in valuable card space savings. The break-out from ribbon fiber to discrete fiber occurs in the crimp area of the standard MTP connector, providing additional flexibility when routing discrete fibers on the line card. Features and Benefits ■ Break-out boxes sized to fiber count ensures 24-Fiber break-out box to various single-fiber connectors MTP-to-LC break-out assembly ■ 1. 60mm to 3.00mm up-jacketed leads available minimal size to reduce real estate required for mounting ■ Flat or round break-out transition systems allow multiple mounting options ■ 900µm Hytrel† discrete fiber leads are ideal for board-level use where minimal size and ease-ofrouting are critical with Kevlar‡ are ideal for system interconnect where ruggedized leads are required SPECIFICATIONS Reference Information Packaging: Custom per assembly Specifications: MTP connector break-out assemblies and 900µm MT based break-out box and tube assemblies meet GR-2866 CORE specifications Optical Insertion Loss (IL): Dependent upon connector choice Reference the respective single-fiber or ribbon-fiber connector data sheet Mechanical Operating Temperature: -5 to +70°C Physical Dependent on break-out construction MTP break-out connector with 900µm tubing *MTP is a registered trademark of US Conec Ltd. † ‡ Hytrel and Kevlar are registered trademarks of DuPont APPLICATIONS Optical Break-Out Cable Assemblies 8-Fiber MTP assembly broken out to 8 LC connectors through a tube ■ Telecommunication Equipment - Hubs - Servers ■ Datacommunication Equipment - Line cards BREAK-OUT VERSIONS .39 10 1.30 33 Bare-Ribbon Break-Out Box Bare-Ribbon Break-Out Tube MTP Break-Out Connector ORDERING INFORMATION Order No. 86085-0000 86000-0061 86000-0060 86000-0062 86000-0064 86000-0065 86000-0065 86000-0065 86000-0065 86000-0063 24-Fiber Box Tube 13 to 24 24 Jacketed Round Tube Break-Out Component MTP Connector Standard Box Jacketed Box 4 to 12 No. of Fibers Ribbon Type Bare Jacketed Bare or Jacketed 1.60 or 2.00mm 3.00mm 1.60mm 2.00mm Flat 900µm or 1.60mm Transition Design MPO Flat Stackable Flat without Stacking Tabs Flat 900µm Discrete Fiber Furcation Tube Dimensions W x L x H (mm) or Diameter (Ø) x L(mm) 10.00 x 33.00 x 5.70 16.00 x 55.00 x 5.00 16.00 x 55.00 x 5.00 18.00 x 52.00 x 7.00 Ø 7.60 x 22.00 Ø 6.60 to Ø10.70 x 70.00 Ø9.00 to Ø14.70 x 70.00 Ø12.00 x 70.00 Ø15.00 x 70.00 28.00 x 61.00 x 8.00 Notes: -The information above is for provided for reference only. -Molex does not sell break-out box components as individual components; they are only sold as part of a terminated jumper or pigtail. Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX amerinfo@molex.com Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 feninfo@molex.com Far East South Headquarters Jurong, Singapore 65-6-268-6868 fesinfo@molex.com European Headquarters Munich, Germany 49-89-413092-0 eurinfo@molex.com Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax:630-969-1352 Visit our Web site at http://www.molex.com/fiber/breakout_cable.html Order No. USA-290 Printed in USA/JI/2005.04 ©2005 Molex