0002066104

12 11 G 9 7 8 5 6 4 3 2 1 ENG. NO. PART NO. H 10 1560-(P901) 1560-(P901)L 1560-(561) 1560-(561)L 1560-(228) 1560-(228)L 1560-(231) 1560-(231)L 1560-(550) 1560-(550)L 1560-(591) 1560-(591)L 02-06-2101 02-06-2103 02-06-6101 02-06-6102 02-06-6118 02-06-6119 02-06-6116 02-06-6112 02-06-6100 02-06-6103 02-06-6105 02-06-6104 (3.00) .118 H | (1.63/1.50) .064/.059 "A" (.25) MAX. DIA. G .010 CARRIER CUT OFF (2.74/2.16) .108/.085 SELECT GOLD PLATE DEPTH (WHEN SPECIFIED) (2.03) .080 F F SECT. "B-B" LEGEND SCALE:10X (16.8) .66 1560-(✴✴✴✴)✴ E E P=PREPLATE BLANK=POSTPLATE FORM BLANK=CHAIN L=LOOSE "B" "B" .140/.110 (2.03) FINISH CODE .080 "C" D (3.56/2.79) "C" (3.56) .140 NOTES: (.25) 1. MATERIAL: BRASS MAX. .010 CARRIER CUT OFF 2. FINISHES: 901 HOT TIN DIP (.00051)/.000020 MIN. "A" CL (1.52) 228 SELECT GOLD PLATE (.00075)/.000030 MIN. IN CONTACT AREA, SELECT TIN SECT. "C-C" (.38) .015 .060 D SCALE:10X SECT. "A-A" (.00250)/.000100 MIN. IN CRIMP AREA OVER (.00125)/.000050 MIN. NICKEL OVERALL. 231 SELECT GOLD PLATE (.00125)/.000050 MIN. IN CONTACT AREA, SELECT TIN C (25.40) (.00250)/.000100 MIN. IN CRIMP AREA OVER (.00125)/.000050 MIN. NICKEL OVERALL. C 1.000 561 SELECT GOLD PLATE (.00076)/.000030 MIN. IN CONTACT AREA, OVER (.00127)/.000050 MIN. NICKEL OVERALL. CARRIER VIEW ACTUAL SIZE 591 SELECT GOLD PLATE (.00127)/.000050 MIN. IN CONTACT AREA, OVER (.00127)/.000050 MIN. NICKEL OVERALL WITH (.000025)/.000010 MAX. GOLD FLASH OVERALL. 550 SELECT GOLD PLATE (.00038)/.000015 MIN. IN CONTACT AREA, OVER (.00076)/.000030 MIN. NICKEL OVERALL WITH (.000025)/.000010 MAX. GOLD FLASH OVERALL. B B 3. PRODUCT SPECIFICATION: PS-02-06 4. PACKAGING INFORMATION: LOOSE TERMINALS: PK-1190-003 CHAIN TERMINALS: 15600000-PK SYMBOLS = 0 = 0 5. TERMINAL FOR USE WITH (1.57)/.062 DIA. SERIES HOUSINGS AND WILL ACCEPT 18 THRU 24 AWG WIRE. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE IN/MM 8:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 = 0 A MM ± 3 PLACES ± ± DOCUMENT STATUS 12 P1 RELEASE DATE 11 2019/05/10 10 19:11:18 C 0.25 ± 0.014 ± 0.35 ± 1 PLACE = 0 0 PLACES ± 9 8 7 6 = 0 0.01 2 PLACES ± ANGULAR TOL FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 INCH 4 PLACES ± = 0 = 0 CURRENT REV DESC: UPDATE PK SPEC ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 614240 DRWN: JEHRISMAN CHK'D: FSMITH APPR: FSMITH INITIAL REVISION: DRWN: GEP APPR: RAS THIRD ANGLE PROJECTION 4 2019/03/22 2019/05/10 2019/05/10 CRIMP TERMINAL, MALE .062 DIA. FOR 18-24 AWG WIRE PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1987/08/19 1987/08/19 DRAWING SERIES C-SIZE 1560 3 SD-1560-X MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 AP1 SHEET NUMBER 1 OF 1 1 A