0002091117

12 PART NO. 11 10 9 7 8 5 6 4 3 1 ENG NO. 02-09-1119 1381-A(P901)L H 02-09-1117 2 1381-A(P901) .117±.020 (2.9±0.51) .148±.012 (3.76±0.30) .173 (4.39) C L C L 02-09-5142 1381-A(P550)L .140 (3.56) 02-09-5143 1381-A(P550) H C L .125 (3.18) SECT. "A-A" SECT. "B-B" G G .089/.085 (2.26/2.16) "C" C L SELECT GOLD PLATE DEPTH (WHEN SPECIFIED) Top Left Crimp Near F DIA. F Ref. STANDARD CHAIN LEGEND .865±.016 1381-A(****)* E P = PREPLATE BLANK = POSTPLATE .142±.003 (3.61±0.08) (21.97±0.41) E FORM BLANK = STD. CHAIN 1 = STD. CHAIN WITH INTERLEAF PAPER L = LOOSE .055±.016 (1.40±0.41) "B" "B" FINISH CODE "A" "A" D .24 (6.1) D "C" .120 (3.05) .085 (2.16) C C SECT. "C-C" NOTES: 1. MATERIAL: BRASS 2. FINISH: 901 HOT TIN DIP .000020/(0.00051) MIN. 591 SELECT GOLD PLATE .000050/(0.00127) MIN. IN CONTACT AREA. OVER .000050/(0.00127) MIN. NICKEL OVERALL WITH .000010/(0.00025) MAX. GOLD FLASH OVERALL. 550 SELECT GOLD PLATE .000015/(0.00038) MIN. IN CONTACT AREA, OVER .000030/(0.00076) MIN. NICKEL OVERALL WITH .000010/(0.00025) MAX. GOLD FLASH OVERALL. B CHAIN FORM FULL SCALE B 3. PRODUCT SPECIFICATION PS-43660-9999. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4. PACKAGING INFORMATION: NOT AVAILABLE 5. TERMINAL FOR USE WITH .093/(2.36) SERIES HOUSINGS AND WILL ACCEPT 18-22 AWG WIRE 6. INSERTION FORCE: 3.5 LBS. MAX. WHEN TERMINAL IS INSERTED INTO AN .093 SERIES HOUSING. 7. TERMINAL RETENTION: 20 LBS. MIN. FROM HOUSING. DIMENSION UNITS SCALE IN/MM 6:1 MM ± 3 PLACES ± ± 0.25 ± 0.014 ± 0.35 ± ANGULAR TOL RELEASE DATE 11 2022/03/31 10 0.01 2 PLACES ± 0 PLACES ± P1 INCH 4 PLACES ± 1 PLACE DOCUMENT STATUS 12 ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 10:33:06 9 8 CURRENT REV DESC: REMOVED OBSOLETED PART NUMBER AS PER PCN#509450. GENERAL TOLERANCES (UNLESS SPECIFIED) A FORMAT: Eng-lega-master-tb-prod-C REVISION: E DATE: 2020/01/14 .5TYP REF. (13) 7 6 5 EC NO: 694111 DRWN: SUGEEB CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: GEP APPR: RAS THIRD ANGLE PROJECTION 4 2022/01/24 2022/03/31 2022/03/31 CRIMP TERMINAL, FEMALE .093/(2.36) DIA. 18-22 AWG PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1987/11/06 1987/11/06 DRAWING SERIES C-SIZE 1381 3 SD-1381-X MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 BY1 SHEET NUMBER 1 OF 1 1 A