0002092116

12 H 11 10 PART NO. ENG. NO. 02-09-2118 02-09-2116 02-09-6123 02-09-6122 02-09-2119 1380-(P901)L 9 7 8 1380-(P901) 1380-(550)L 1380-(550) 1380-A(P901)L 5 6 4 3 2 1 .117±.020 (2.97±0.51) .148±.012 (3.76±0.30) .173 (4.39) C L C L .140 (3.56) Top Left Crimp Near H .125 (3.18) Ref. C L SECT. "B-B" SECT. "A-A" REWOUND CHAIN G .094/.089 (2.39/2.26) G DIA. C L OPTIONAL DETENT SELECT GOLD PLATE DEPTH (WHEN SPECIFIED) F Top Right Crimp Near Ref. LEGEND 1380-*(****)* E OPTIONAL DETENT BLANK = WITH DETENT A = WITHOUT DETENT P = PREPLATE BLANK = POSTPLATE D F STANDARD CHAIN .865±.016 (21.97±0.41) FORM BLANK = STD. CHAIN A = REWOUND CHAIN L = LOOSE 1 = STD. CHAIN WITH INTERLEAF PAPER .142±.003 (3.61±0.08) E .055±.016 (1.40±.0.41) FINISH CODE (SEE NOTE 2) "B" "B" NOTES: "A" "A" 1. MATERIAL: BRASS .24 (6.1) D 2. FINISH: 999 UNPLATED 901 HOT TIN DIP .000020/(0.00051) MIN. 591 SELECT GOLD PLATE .000050/(0.00127) MIN. IN CONTACT AREA, OVER .000050/(0.00127) .120 (3.05) MIN. NICKEL OVERALL WITH .000010/(0.00025) MAX. GOLD FLASH OVERALL. C .085 (2.16) C 550 SELECT GOLD PLATE .000015/(0.00038) MIN. IN CONTACT AREA, OVER .000030/(0.00076) MIN. NICKEL OVERALL WITH .000010/(0.00025) MAX. GOLD FLASH OVERALL. 3. 4. 5. 6. PRODUCT SPECIFICATION: PS-02-09. PACKAGING INFORMATION: NOT AVAILABLE TERMINAL FOR USE WITH .093/(2.36) SERIES HOUSINGS AND WILL ACCEPT 18 THRU 22 AWG INSERTION FORCE: 3.5 LBS. MAX. WHEN TERMINAL IS INSERTED INTO AN .093 SERIES HOUSING. CHAIN FORM FULL SCALE 7. TERMINAL RETENTION: 20 LBS. MIN. FROM HOUSING. B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE IN/MM 6:1 CURRENT REV DESC: OBSOLETE PART NUMBER GENERAL TOLERANCES (UNLESS SPECIFIED) MM A 4 PLACES ± ± 3 PLACES ± ± 0.01 0.14 2 PLACES ± 0.25 ± ± 0.35 ± 1 PLACE 0 PLACES ± ANGULAR TOL DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: E DATE: 2020/01/14 P1 RELEASE DATE 11 2020/05/15 10 INCH ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 16:30:06 9 8 7 6 5 EC NO: 637127 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: GEP APPR: RAS THIRD ANGLE PROJECTION 4 2020/05/07 2020/05/15 2020/05/15 CRIMP TERMINAL .093 DIA., MALE FOR 18 THRU 22 AWG. WIRE PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1987/11/06 1987/11/06 DRAWING SERIES C-SIZE 1380 3 SD-1380-X MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 BW SHEET NUMBER 1 OF 1 1 A