0002095130

H 12 11 PART NO. ENG. NO. 02-09-1119 02-09-1117 02-09-5130 02-09-5142 02-09-5143 1381-A(P901)L 1381-A(P901) 1381-A(P591) 1381-A(P550)L 1381-A(550) 10 9 7 8 5 6 4 3 2 1 .117±.020 .148±.012 (3.76±0.30) .173 (4.39) (2.9±0.51) C L C L CL H .140 (3.56) .125 (3.18) SECT. "A-A" SECT. "B-B" G G .089/.085 (2.26/2.16) "C" DIA. C L F SELECT GOLD PLATE DEPTH (WHEN SPECIFIED) Top Left Crimp Near F Ref. STANDARD CHAIN LEGEND .865±.016 (21.97±0.41) 1381-A(****)* E .142±.003 (3.61±0.08) FORM BLANK = STD. CHAIN P = PREPLATE BLANK = POSTPLATE E .055±.016 (1.40±0.41) 1 = STD. CHAIN WITH INTERLEAF PAPER L = LOOSE "B" "B" FINISH CODE "A" D "A" .24 (6.1) D "C" .120 (3.05) .085 (2.16) NOTES: 1. MATERIAL: BRASS 2. FINISH: 901 HOT TIN DIP .000020/(0.00051) MIN. 591 SELECT GOLD PLATE .000050/(0.00127) MIN. IN CONTACT AREA. OVER .000050/(0.00127) MIN. NICKEL OVERALL WITH .000010/(0.00025) MAX. GOLD FLASH OVERALL. 550 SELECT GOLD PLATE .000015/(0.00038) MIN. IN CONTACT AREA, OVER .000030/(0.00076) MIN. NICKEL OVERALL WITH .000010/(0.00025) MAX. GOLD FLASH OVERALL. C C SECT. "C-C" .5TYP REF. (13) CHAIN FORM FULL SCALE 3. PRODUCT SPECIFICATION PS-43660-9999. 4. PACKAGING INFORMATION: NOT AVAILABLE B B 5. TERMINAL FOR USE WITH .093/(2.36) SERIES HOUSINGS AND WILL ACCEPT 18-22 AWG WIRE 6. INSERTION FORCE: 3.5 LBS. MAX. WHEN TERMINAL IS INSERTED INTO AN .093 SERIES HOUSING. 7. TERMINAL RETENTION: 20 LBS. MIN. FROM HOUSING. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE IN/MM 6:1 GENERAL TOLERANCES (UNLESS SPECIFIED) MM A ± 3 PLACES ± ± 0.25 ± 0.014 ± 0.35 ± ANGULAR TOL P1 RELEASE DATE 11 2020/05/15 10 0.01 2 PLACES ± 0 PLACES ± DOCUMENT STATUS 12 INCH 4 PLACES ± 1 PLACE FORMAT: Eng-lega-master-tb-prod-C REVISION: E DATE: 2020/01/14 CURRENT REV DESC: OBSOLETE PART NUMBER ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 16:30:06 9 8 7 6 5 EC NO: 637127 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: GEP APPR: RAS THIRD ANGLE PROJECTION 4 2020/04/30 2020/05/15 2020/05/15 CRIMP TERMINAL, FEMALE .093/(2.36) DIA. 18-22 AWG PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1987/11/06 1987/11/06 DRAWING SERIES C-SIZE 1381 3 SD-1381-X MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 BY SHEET NUMBER 1 OF 1 1 A