0002098108

12 11 PART NO. 02-09-8103 02-09-8108 10 9 ENG. NO. DIM. "D" DIA. 1973-A(P901) 1973-2A(P901) .091±.003/(2.31±0.08) .091±.003/(2.31±0.08) 7 8 5 6 4 3 2 1 INSULATION CRIMP PER SECTION "A-A"-1 SECTION "A-A"-2 H .160/.135 (4.06/3.43) .235/.180 (5.97/4.57) .173 (4.39) H C L C L .140 (3.56) .190±.010 (4.83±0.25) C L G SECTION "A-A"-2 SPECIAL DOUBLE WIRE CRIMP FOR 1973-2 VERSION STANDARD VERSION FOR 1973 & 1973-1 VERSIONS .135/.100 DIM. "D" (3.43/2.54) "C" F G SECTION "A-A"-1 CL F C L .125 (3.18) LEGEND .34 (8.6) REF. 1973-*A(****)* VERSION BLANK=ORIGINAL 1=MODIFIED PIN DIA. 2=LARGER INSUL. CRIMP E SECTION "B-B" FORM BLANK=CHAIN L=LOOSE FINISH CODE P=PREPLATE BLANK=POSTPLATE E .972±.016 (24.69±0.41) .142±.003 (3.61±0.08) .055±.016 (1.40±.0.41) D "B" "A" C "B" "A" .24 (6.1) NOTES: C 1. MATERIAL: CARTRIDGR BRASS ALLOY, .010/(0.25) THICK. "C" 2. FINISHES: .120 (3.05) 105 TIN PLATE .000300/(0.00762) MIN. OVER .000100/(0.00254) MIN. COPPER OVERALL. 901 HOT TIN DIP .000020/(0.00051) MIN. B D .085 (2.16) SECTION "C-C" 3. PACKAGING INFORMATION: NOT AVAILABLE 4. TERMINALS FOR USE WITH .093/(2.36) SERIES HOUSINGS. 1973 & 1973-1 VERSIONS WILL ACCEPT 18 THRU 22 AWG WIRE. 1973-2 VERSION IS FOR USE WITH 14 THRU 18 AWG WIRE AND DOUBLE CRIMPS OF ONE 16 AND ONE 18 AWG OR TWO 18 AWG WIRES. B 5. INSERTION FORCE: 3.5 LBS. MAX. WHEN TERMINAL IS INSERTED INTO .124/(3.15) DIA. CORE HOLE. 6. CONTACT RETENTION: 20 LBS. MIN. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 7. FLOAT: TERMINAL MAY ROTATE IN HOUSING, BUT SHOULD NOT SPIN FREELY WHEN WIRE IS ROLLED BETWEEN FINGERS. DIMENSION UNITS SCALE IN/MM 6:1 GENERAL TOLERANCES (UNLESS SPECIFIED) MM A ± 3 PLACES ± ± 0.25 ± 0.014 ± 0.35 ± ANGULAR TOL P1 RELEASE DATE 11 2020/05/15 10 0.01 2 PLACES ± 0 PLACES ± DOCUMENT STATUS 12 INCH 4 PLACES ± 1 PLACE FORMAT: Eng-lega-master-tb-prod-C REVISION: E DATE: 2020/01/14 CURRENT REV DESC: OBSOLETE PART NUMBER ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 16:30:07 9 8 7 6 5 EC NO: 637127 DRWN: AKUMAR19 CHK'D: GGA APPR: GGA INITIAL REVISION: DRWN: GWC APPR: GWF THIRD ANGLE PROJECTION 4 2020/05/06 2020/05/15 2020/05/15 CRIMP TERMINAL, MALE, GROUND PIN, .093 DIA., FOR VARIOUS WIRE SIZES PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1992/06/17 1992/06/17 DRAWING SERIES C-SIZE 1973 3 SD-1973-X MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 E SHEET NUMBER 1 OF 1 1 A