0008580128

12 11 10 9 8 7 5 6 4 3 2 1 H H G (P909) OVERALL HOT TIN DIP: (0.00254)/.000100 MIN. (550) SELECT GOLD: (0.00038)/.000015 MIN. OVERALL GOLD FLASH: (0.00005)/.000002 MIN. OVERALL NICKEL UNDERPLATE: (0.00076)/.000030 MIN. (555) SELECT GOLD: (0.00038)/.000015 MIN. OVERALL NICKEL UNDERPLATE: (0.00076)/.000030 MIN. G F F E E D D C C B A 1. MATERIAL: SEE LEGEND 2. FINISH: SEE LEGEND 3. THIS PART CONFORMS TO PRODUCT SPECIFICATIONS PS-08-50, PS-172160-0001 4. PACKAGING SPECIFICATION: LOOSE FORM: PK-2759-001 CHAIN FORM: PK-2759-002 5. CRIMP ACCEPTS 18 TO 20 AWG WIRE WITH (2.79)/.110 MAX. INSULATION DIAMETER WHEN USED WITH 172159 SERIES HOUSINGS, (2.54)/.100 MAX INSUATION DIAMETER WHEN USED WITH 2139 OR 3069 SERIES HOUSINGS. CRIMP ACCEPTS (3.00)/.118 MAX. INSULATION DIAMETER WITH SPECIAL TOOLING. 6. (0.86±0.05)/.034±.002 IS AN OPTIONAL DESIGN 7. PARTS CONFORM TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 8. MATING TERMINALS TO ROUND PINS IS NOT RECOMMENDED B SYMBOLS = 0 = 0 DOCUMENT STATUS 12 P1 RELEASE DATE 11 2018/10/05 10 = 0 = 0 C 8 MM/IN 1:1 MM 7 6 INCH 4 PLACES ± ± 3 PLACES ± ± 0.005 2 PLACES ± 0.13 ± ± 0.25 ± = 0 1 PLACE = 0 0 PLACES ± = 0 CURRENT REV DESC: NOTE 4 UPDATED GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL 09:56:22 9 SCALE = 0 = 0 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 0.01 ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 605479 DRWN: SS06 CHK'D: ISHWARG APPR: ISHWARG INITIAL REVISION: DRWN: COMSTOCK APPR: FSMITH THIRD ANGLE PROJECTION 4 2018/09/12 2018/10/05 2018/10/05 TERMINAL,DBL.CANTILEVER KK CRIMP TYPE BIFURCATED PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1988/11/29 2015/02/18 DRAWING SERIES C-SIZE 2878 3 SD-2878 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 AM2 SHEET NUMBER GENERAL MARKET 1 OF 2 1 A 12 11 10 9 8 7 5 6 4 3 2 1 H H G G F F SELECT GOLD COVERAGE SELECT GOLD SELECT GOLD AREA AREA SEE NOTE E E NOTE: GOLD IS SPECIFIED THICKNESS IN SELECT GOLD AREA ONLY. D D GOLD LOCATION OPTION B GOLD LOCATION OPTION A C C B B SYMBOLS = 0 = 0 PAPER INTERLEAF PAPER INTERLEAF = 0 WINDING DETAIL B WINDING DETAIL A SCALE MM/IN 1:1 MM ± 3 PLACES ± ± 0.005 2 PLACES ± 0.13 ± ± 0.25 ± 1 PLACE = 0 0 PLACES ± ANGULAR TOL DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 11 2018/10/05 10 09:56:22 C 9 8 7 6 = 0 INCH 4 PLACES ± = 0 = 0 CURRENT REV DESC: NOTE 4 UPDATED GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 A THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 0.01 ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 605479 DRWN: SS06 CHK'D: ISHWARG APPR: ISHWARG INITIAL REVISION: DRWN: COMSTOCK APPR: FSMITH THIRD ANGLE PROJECTION 4 2018/09/12 2018/10/05 2018/10/05 TERMINAL,DBL.CANTILEVER KK CRIMP TYPE BIFURCATED PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1988/11/29 2015/02/18 DRAWING SERIES C-SIZE 2878 3 SD-2878 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 AM2 SHEET NUMBER GENERAL MARKET 2 OF 2 1 A