0008650804

12 11 10 9 8 7 5 6 4 3 2 1 NOTES: 1. MATERIAL: PHOS BRONZE 2. FINISH: SEE LEGEND H H 3. PRODUCT SPECIFICATION: PS-10-07 4. PACKAGING: LOOSE TERMINALS: PER PK-2759-001 CHAIN FORM TERMINALS: PER PK-2759-002 5. INSERTION FORCE OF TERMINAL INTO (2.54)/.100 CL HOUSING IS 11.1 N / 2.5 LBS MAX. 6. TERMINAL RETENTION IN HOUSING IS 26.7N / 6LBS MIN. WHEN PULLED AT THE RATE OF 25.4MM / 1 INCH PER MINUTE. 7. DIMENSIONS GIVEN ACROSS CENTERLINES ARE SYMMETRICAL ABOUT THOSE CENTERLINES WITHIN HALF THE TOTAL TOLERANCE. G G 8. CRIMP IS FOR 22-30 GA WIRE WITH (1.57)/.062 DIA. INSULATION MAX. 9. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002 F F E E 1.98 1.85 .078 .073 D D L=LOOSE A= SEE NOTE 1 C C BLANK=CHAIN PER DETAIL B (P909) OVERALL HOT TIN DIP: (0.00254)/.000100 MIN. (154) OVERALL TIN: (0.00254)/.000100 MIN. OVER (0.00127)/.000050 MIN. NICKEL B 08-65-0804 41572-A(P909) 08-65-0805 41572-A(P909)L 41572-0002 41572-A(154) B NOT TO SCALE SYMBOLS = 0 = 0 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE MM/IN 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 = 0 A MM ± 3 PLACES ± ± DOCUMENT STATUS 12 P1 RELEASE DATE 11 2018/10/05 10 09:56:23 C 0.25 ± 0.015 ± 0.38 ± 1 PLACE = 0 0 PLACES ± 9 8 7 6 = 0 0.01 2 PLACES ± ANGULAR TOL FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 INCH 4 PLACES ± = 0 = 0 CURRENT REV DESC: NOTE 4 UPDATED ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 605479 DRWN: SS06 CHK'D: ISHWARG APPR: ISHWARG INITIAL REVISION: DRWN: SAMIEC APPR: THIRD ANGLE PROJECTION 4 2018/09/11 2018/10/05 2018/10/05 KK (2.54)/.100 CRIMP TERMINAL 22-30 GA 6459 WITH CAT EAR PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1993/03/19 DRAWING SERIES C-SIZE 41572 3 SD-41572 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 G2 SHEET NUMBER GENERAL MARKET 1 OF 1 1 A