0039303048

12 10 11 9 7 8 5 6 4 3 2 1 SEE NOTE 6 .165 (4.20) 2 .378 (9.60) .520 (13.20) .772 (19.60) SEE NOTE 11 H SEE NOTE 11 OPTIONAL SELECT GOLD AREA OPTIONAL SELECT GOLD AREA G H OPTIONAL SELECT TIN AREA G OPTIONAL SELECT TIN AREA F F E E . VIEWED FROM COMPONENT SIDE 400 = NYLON 6/6, U.L. 94V-O. COLOR: BLACK. 4-12 CIRCUIT PART G, GS - .000030/(.00076) MIN. SELECT GOLD AND .000100/(.00127) MIN. SELECT MATTE TIN OVER .000050/(.00127) MIN NICKEL OVERALL. D D 2 CIRCUIT G2, GS2 - .00015/(.00038) MIN. SELECT GOLD AND .000100/(.00254) MIN. SELECT MATTE TIN OVER .000050/(.00127) MIN. NICKEL OVERALL. VIEWED FROM COMPONENT SIDE RM - .000060/(.00152) MIN REFLOWED MATTE TIN OVER .000050/(.00127) MIN. NICKEL OVERALL. BLANK, S, MS - .000100/(.00254)MIN. MATTE TIN OVER .000050/(.00127) MIN. NICKEL OVERALL. C 2 .287±.003 7.30±0.08 3 4) PACKAGING SPECIFICATION : BULK PACK PER PK-5569-002 TRAY PACK PER PK-5569-005 APPLIES TO ALL #4 OR M3 SELF TAPPING SCREWS. B CIRCUIT SIZES 2 7) DISCOLORATION IN THE BANDOLIER CARRIER AREA OF THE PIN IS INHERENT TO THE PLATING PROCESS AND IS DUE TO THE MASKING EFFECT OF THE CARRIER. THIS DISCOLORATION IS IN A NON-FUNCTIONAL AREA OF THE PIN AND WILL NOT AFFECT THE PERFORMANCE OF THE HEADER ASSEMBLY. .118±.002 3.00±0.05 .083±.003 2.10±0.08 4 PLACES 5 C BOTH PEGGED VIEWED FROM COMPONENT SIDE 2 CIRCUIT PART AND FLANGED B 8) CONNECTORS ARE NOT TO BE MATED OR UNMATED WHILE CIRCUIT ARE LIVE. THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 9) PARTS NOT DESIGNED FOR CURRENT SHARING. 10) PART CONFORMS TO CLASS "B" REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. DIMENSION UNITS SCALE IN/MM NTS GENERAL TOLERANCES (UNLESS SPECIFIED) MM 11) FORMING MARKS ON PINS ARE ACCEPTABLE 12 CORNER CORE-OUTS ARE OPTIONAL AND MAY OR MAY NOT BE PRESENT. A DOCUMENT STATUS 12 P1 RELEASE DATE 11 ± 3 PLACES ± ± 0.015 2022/11/16 10 THIS DRAWING REPLACES DRAWING SDA-5569-NL* 8 7 6 ± ± 0 PLACES ± ± ANGULAR TOL 09:25:17 9 0.38 ± 1 PLACE LOCATION MAY VARY DEPENDING ON PART NUMBER AND/OR TOOL. INCH 4 PLACES ± 2 PLACES ± 13) TEXT ON PART IS FOR REFERENCE ONLY. TEXT AND TEXT FORMAT: Eng-lega-master-tb-prod-C REVISION: E1 DATE: 2021/05/01 CURRENT REV DESC: ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 728634 DRWN: JERRYW8 CHK'D: XQZHANG APPR: XQZHANG INITIAL REVISION: DRWN: KSS APPR: RAS THIRD ANGLE PROJECTION 4 2022/11/15 2022/11/16 2022/11/16 RIGHT ANGLE HEADER ASSY (SINGLE ROW) (MINI-FIT JR. SERIES) PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2/14/89 2/14/89 DRAWING SERIES C-SIZE 5569 3 55690004-SD MATERIAL NUMBER PSD 000 CUSTOMER SEE CHARTS 2 A2 SHEET NUMBER GENERAL MARKET 1 OF 2 1 A 12 10 11 9 7 8 5 6 4 3 2 1 UL94V-0 UL94V-2 PACKAGING OPTION 2 PACKAGING OPTION 2 H H SCREW MOUNT POSITIVE LOCK SCREW MOUNT POSITIVE LOCK MS MS 50-30-4469 NO E.D.P. BULK BULK NICKEL NICKEL NO E.D.P. NO E.D.P. BULK BULK 5569-04A3MS-210 5569-05A3MS-210 4 5 SCREW SCREW POSITIVE POSITIVE TIN/NICKEL TIN/NICKEL 94V-0 94V-0 BULK BULK 5569-04A3GS-210 5569-05A3GS-210 4 5 SCREW SCREW POSITIVE POSITIVE 30 GOLD 30 GOLD 94V-0 94V-0 BULK BULK G G PEG MOUNT POSITIVE LOCK PEG MOUNT POSITIVE LOCK NICKEL NICKEL 46999-0709 5569-02A4G 2 PEGS POSITIVE 46999-0710 5569-06A4G 6 PEGS POSITIVE 30 GOLD 30 GOLD 30 GOLD 30 GOLD F E 46999-0713 46999-0100 46999-0714 5569-02A4MS 5569-05A4MS 5569-06A4MS 2 5 6 PEGS PEGS PEGS POSITIVE POSITIVE POSITIVE 46999-0098 5569-05A4RM 5 PEGS POSITIVE TIN/NICKEL TIN/NICKEL TIN/NICKEL REFLOW/NICKEL BULK BULK 94V-2 94V-2 TRAY BULK BULK TRAY 94V-2 94V-2 94V-2 TRAY BULK TRAY 94V-2 BULK 46999-0703 39-30-3046 39-30-3056 39-30-3054 46999-0704 5569-02A4MS-210 5569-04A4MS-210 5569-05A4MS-210 5569-05A4MS-210-T 5569-06A4MS-210 2 4 5 5 6 PEGS PEGS PEGS PEGS PEGS POSITIVE POSITIVE POSITIVE POSITIVE POSITIVE TIN/NICKEL TIN/NICKEL TIN/NICKEL TIN/NICKEL TIN/NICKEL 94V-0 94V-0 94V-0 94V-0 94V-0 TRAY BULK BULK TRAY TRAY 46999-0711 39-30-3048 39-30-3058 46999-0712 5569-02A4G-210 5569-04A4G-210 5569-05A4G-210 5569-06A4G-210 2 4 5 6 PEGS PEGS PEGS PEGS POSITIVE POSITIVE POSITIVE POSITIVE 30 GOLD 30 GOLD 30 GOLD 30 GOLD 94V-0 94V-0 94V-0 94V-0 TRAY BULK BULK TRAY 46999-0432 50-30-4436 5569-04A4GS-400 5569-05A4GS-400 4 5 PEGS PEGS POSITIVE POSITIVE 30 GOLD 30 GOLD 94V-0 94V-0 BULK BULK 46999-0707 46999-0288 46999-0289 46999-0708 5569-02A4MS-400 5569-04A4MS-400 5569-05A4MS-400 5569-06A4MS-400 2 4 5 6 PEGS PEGS PEGS PEGS POSITIVE POSITIVE POSITIVE POSITIVE TIN/NICKEL TIN/NICKEL TIN/NICKEL TIN/NICKEL 94V-0 94V-0 94V-0 94V-0 TRAY BULK BULK TRAY F E PEG MOUNT, PASSIVE LOCK D D MS MS NICKEL NICKEL BULK BULK BULK BULK S S C C B B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE IN/MM NTS CURRENT REV DESC: GENERAL TOLERANCES (UNLESS SPECIFIED) MM 4 PLACES ± ± 3 PLACES ± ± 0.015 2 PLACES ± A 0.38 ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS 12 P1 RELEASE DATE 11 2022/11/16 10 ± ± 1 PLACE FORMAT: Eng-lega-master-tb-prod-C REVISION: E1 DATE: 2021/05/01 INCH ± 3.0 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 09:25:17 9 8 7 6 5 EC NO: 728634 DRWN: JERRYW8 CHK'D: XQZHANG APPR: XQZHANG INITIAL REVISION: DRWN: KSS APPR: RAS THIRD ANGLE PROJECTION 4 2022/11/15 2022/11/16 2022/11/16 RIGHT ANGLE HEADER ASSY (SINGLE ROW) (MINI-FIT JR. SERIES) PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2/14/89 2/14/89 DRAWING SERIES C-SIZE 5569 3 55690004-SD MATERIAL NUMBER PSD 000 CUSTOMER SEE CHARTS 2 A2 SHEET NUMBER GENERAL MARKET 2 OF 2 1 A