0050291597

12 11 10 9 7 8 5 6 4 3 2 1 NOTES: 1. MATERIAL: 301 STAINLESS STEEL, .020 / (0.51) THICK 2. FINISH: NONE 3. PRODUCT SPECIFICATION: NONE 4. PACKAGING SPECIFICATION: 421720001-PK 5. THIS GROUND CLIP CRIMPS TO 14-18 AWG WIRE WITH .031/0.79 THICK INSULATION. SEE CHART FOR WIRE AWG AND RECOMMENDED PANEL THICKNESS. 6. THIS CLIP IS INTENDED FOR USE AS A SECONDARY GROUND. H H G G .010 MAX. CUT-OFF (0.25) F F E E 1.156 REF. 29.36 D CLIP IDENTIFICATION LETTER(S) IN ENGINEERING NO. SUFFIX 42172 - **1 SEE CHART CARRIER VIEW D C B C 40-06-2014 42172-AA1 AA .008/(0.20) .15/(3.8) .015/(0.38)-.035/(0.89) 50-29-1597 42172-H1 H .035/(0.89) .17/(4.3) .045/(1.14)-.060/(1.52) 40-06-2013 42172-C1 C .050/(1.27) .17/(4.3) .060/(1.52)-.075/(1.91) 40-06-2005 42172-B1 B .025/(0.64) .17/(4.3) .035/(0.89)-.050/(1.27) 40-06-2003 40-06-2024 42172-A1 42172-G1 A PART NO. DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: E DATE: 2020/01/14 ENG. NO. P1 A .008/(0.20) .004/(0.10) G CLIP I.D. LETTER RELEASE DATE 11 DIM. "D" 2022/10/21 10 .15/(3.8) .15/(3.8) DIM. "E" THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 16-18 AWG .015/(0.38)-.035/(0.89) 2x 18 AWG OR 1x 18 AWG AND 1x 16 AWG .015/(0.38)-.035/(0.89) PANEL THICKNESS RANGE B 2x 16 AWG 14 AWG SINGLE WIRE GAGE DOUBLE WIRE COMBINATION DIMENSION UNITS SCALE IN/MM 5:1 GENERAL TOLERANCES (UNLESS SPECIFIED) MM INCH 4 PLACES ± ± 3 PLACES ± ± 0.01 2 PLACES ± 0.25 ± 0.014 ± 0.35 ± 1 PLACE 0 PLACES ± ANGULAR TOL 0.01 ± ± 0.5 ° DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 17:18:16 9 8 7 6 CURRENT REV DESC: REVISE NOTES, ADD CLIP ID TO CHART 5 GROUND CLIP EC NO: 720821 DRWN: MKIPPER CHK'D: RICARC13 APPR: FSMITH INITIAL REVISION: DRWN: MAB APPR: RAS THIRD ANGLE PROJECTION 4 2022/04/22 2022/10/17 2022/10/21 PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1992/07/24 1992/07/24 DRAWING SERIES C-SIZE 42172 3 SD-42172-XX MATERIAL NUMBER PSD 001 CUSTOMER GENERAL MARKET SEE TABLE 2 T2 SHEET NUMBER 1 OF 1 1 A