0151660906

PRODUCT SPECIFICATION PRODUCT FAMILY SPECIFICATION FOR 0.50MM CENTER FLAT FLEX CABLE (FFC) (EXTRA FLEXIBLE, 105°C, Sn PLATED) Revision List REVISION A B C MODIFICATION First release Margin updated from 0.50 + 0.15/-0.096mm to 0.50 +/- 0.12mm Span updated from 0.50 (N-1) +/- 0.10mm to 0.50 (N1) +/- 0.07mm New format REVISION: ECR/ECN INFORMATION: TITLE: c EC No: 716688 DATE: 2022/05/31 DOCUMENT NUMBER: PS-15166-001 DATE 2011/11/01 2019/04/04 2022/05/31 PRODUCT FAMILY SPECIFICATION FOR 0.50MM CENTER FLAT FLEX CABLE (FFC) (EXTRA FLEXIBLE, 105°C, Sn PLATED) SHEET No. 1 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D. GOMEZ M. IMIG J. SMITH TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC PRODUCT SPECIFICATION 1 SCOPE This product family specification covers the details for 0.50mm center FFC (Flat Flexible Cable) jumper cable, 105°C, using tin plated copper conductor. 2 PRODUCT DESCRIPTION 2.1 Product name and series number Product name: 0.50MM CENTER FFC JUMPER CABLE (EXTRA FLEXIBLE, 105°C, Sn PLATED) Product material no: 15166-XXXX 2.2 Dimensions, materials, and markings Product dimensions according to SD-15166-001. Number of conductors Pitch Span Total width Conductor Width Margin width Strip length End thickness of the connection area Thickness of the insulated area 0.50 ± 0.12mm 2.00 to 10.00 ± 0.80mm Tc 0.30 ± 0.05mm Ti 0.12 ± 0.05mm Insulated length L Reinforcement length End squareness F s-s’ REVISION: ECR/ECN INFORMATION: TITLE: c N P E W CW M S EC No: 716688 DATE: 2022/05/31 DOCUMENT NUMBER: PS-15166-001 6 to 80 0.50 ± 0.05mm 0.50 (N-I) ± 0.07mm 0.50 (N+I) ± 0.10mm 0.30 ± 0,02 mm 20 to 60mm ± 2.00mm 61 to 100mm ± 3.00mm 101 to 200mm ± 4.00mm 201 to 3999mm ± 5.00mm 4000 to 5999mm ± 10.00mm 6000 to 9999mm ± 15.00mm 6.00 to 20.00 ± 2.00mm 0.30mm max. PRODUCT FAMILY SPECIFICATION FOR 0.50MM CENTER FLAT FLEX CABLE (FFC) (EXTRA FLEXIBLE, 105°C, Sn PLATED) SHEET No. 2 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D. GOMEZ M. IMIG J. SMITH TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC PRODUCT SPECIFICATION Type A (Contacts on the same side) Type D (Contacts on the opposite side) 2.3 2.4 Composition  Conductor: Material: Copper Thickness: 0.035 mm nominal Surface Finish: 0.4μm Sn min.  Insulation tape: Material: Thickness: Color: Polyester + Flame retardant adhesive 0.043 mm nomimal white  Reinforcement tape: Material: Thickness: Polyester + Adhesive 0.226 nominal Current and applicable conductors Conductor Width 0.3 mm Conductor Thickness 0.035 mm REVISION: ECR/ECN INFORMATION: TITLE: c EC No: 716688 DATE: 2022/05/31 DOCUMENT NUMBER: PS-15166-001 Cross section Current 0.01mm² 0.35 A PRODUCT FAMILY SPECIFICATION FOR 0.50MM CENTER FLAT FLEX CABLE (FFC) (EXTRA FLEXIBLE, 105°C, Sn PLATED) SHEET No. 3 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D. GOMEZ M. IMIG J. SMITH TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC PRODUCT SPECIFICATION 3 ELECTRICAL AND PHYSICAL SPECIFICATIONS 3.1 Electrical requirements ITEM DESCRIPTION 1 3 4 Conductor resistance Insulation resistance cond. to cond. Dielectric test Continuity test 5 Voltage rating UL20706 6 Current rating at 23°C increase in 10°C at the surface (all conductors under load) 0.35 A MIN FFC at 1 MHz 150 Ω TYP FFC at 1 KHz 50 pF/m 2 TEST CONDITION Impedance cond/cond balanced method Capacitance cond/cond balanced method 7 8 3.2 Physical requirements ITEM DESCRIPTION 23°C 2200 ohms/km MAXIMUM 200 V DC 10 MΩ.m MIN 200 V AC for 1 minute 3.0 V DC at 0.1mA No disruptive discharge passed 60 V AC MAXIMUM TEST CONDITION 9 Operating Temperature 10 Heat resistance REQUIREMENT -40°C to +105°C Insulation resistance Dielectric test 168 hours at 136°C 11 Thermal shock 12 Cold coiling 13 Wear by abrasion 14 Folding 15 Flex Lifecycles 30 minutes at –55°C 5 minutes at +25°C 30 minutes at +85°C 5 minutes at +25°C 96 hours at –40°C / The sample will be wound on a 3mm dia. Mandrel Test following EN3475-503 Weight: 500g Speed: 60 cycles/min Abrasion tool: 0.13mm dia. The specimen shall be folded manually at 180° Speed: 100 cycles/min R1: 5 mm R2: 10 mm Temp: 23°C 16 Moisture resistance 96 hours at 60°C, 95% RH REVISION: ECR/ECN INFORMATION: TITLE: c REQUIREMENT EC No: 716688 DATE: 2022/05/31 DOCUMENT NUMBER: PS-15166-001 Insulation resistance after 25 cycles Insulation resistance Dielectric test Visual inspection 10000 cycles (standard) 1000 cycles (shielded) MINIMUM Continuity after 20 times For R1: 500,000 cycles MIN For R2: 5,000,000 cycles MIN Insulation resistance Dielectric test PRODUCT FAMILY SPECIFICATION FOR 0.50MM CENTER FLAT FLEX CABLE (FFC) (EXTRA FLEXIBLE, 105°C, Sn PLATED) SHEET No. 4 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D. GOMEZ M. IMIG J. SMITH TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC PRODUCT SPECIFICATION 17 Flame resistance 18 Solderability UL 758 VW-1 Immersion of the area which is intended for soldering into a tin bath at 250 ± 10°C for 30 seconds Passed No delamination Solder reflow below 1 mm 4 UL APPROVAL These products are UL compliant under: UL style 20706 Temperature rating: 105°C Voltage rating: 60 V AC 5 ROHS COMPLIANCE Cable construction is RoHS compliant. REVISION: ECR/ECN INFORMATION: TITLE: c EC No: 716688 DATE: 2022/05/31 DOCUMENT NUMBER: PS-15166-001 PRODUCT FAMILY SPECIFICATION FOR 0.50MM CENTER FLAT FLEX CABLE (FFC) (EXTRA FLEXIBLE, 105°C, Sn PLATED) SHEET No. 5 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D. GOMEZ M. IMIG J. SMITH TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.2).DOC