0190270306

ATP - Tooling Kit-19027-0306 Crimp Tooling Specification Sheet ATP Tooling Kit No. 19027-0306 Engineering No. 19027-0306 SCOPE Tooling: ATP Tooling Kits used with Molex Air Tape Press: (ATP 100 and 300 series) or a Molex Mylar Tape Applicator (MTA series). Refer to the appropriate tool instruction manual for installation and operation information. Products: Krimptite Ring Tongue Terminal 18-22 AWG. Refer to the Product part number charts on this sheet for terminals with the barrel and tongue styles listed above. Testing Mechanical The tensile test or pull test is a means of evaluating the mechanical properties of the crimped connections. The following charts show the UL Specifications for various wire sizes. The tensile strength is shown in pounds and indicates the minimum acceptable force to break or separate terminal from the conductor. Color Code Red Red Red Wire Size (AWG) 18 20 22 *UL - 486 A 20 13 8 *UL - 486 A - Terminals (Copper Conductors only) PIN GAUGE OR USE SOFT METAL SLUG METHOD “X” (CRIMP HEIGHT) CRIMP PROFILE Use gauge pins or soft metal slug (solder) method to measure the “X” dimension. Verify tooling crimp height calibration by referring to the Go/No Go dimensions shown in the chart below. Molex does not sell gauge pins contact your local industrial supplier. Wire Range AWG 18 - 22 Doc No. ATS-190270306 Revision: A mm² 0.80 - 0.35 “X” Dimension Conductor Crimp Mean Go No Go In mm In mm In mm .069 1.75 .066 1.67 .076 1.93 Release Date: 12-04-03 Revision Date: 10-30-06 Crimp Inspection Marking N/A UNCONTROLLED COPY Page 1 of 3 ATP - Tooling Kit-19027-0306 The following is a Partial List of the Product Part Numbers and their specifications that this tooling is designed to crimp. We will be adding to this list and an up to date copy is available on www.molex.com. Wire Size: 18 – 22 AWG 0.80 – 0.35mm² Terminal Wire Strip Length Insul. Dia. Max. Terminal No. Eng No. (REF) In mm In mm 19044-0006 A-126-10T .281 7.14 N/A N/A 19044-0007 A-126-38T .281 7.14 N/A N/A 19044-0008 A-126-56T .281 7.14 N/A N/A 19044-0009 A-132-04T .281 7.14 N/A N/A 19044-0010 A-133-10T .281 7.14 N/A N/A 19044-0080 A-126-14T .281 7.14 N/A N/A 19044-0085 A-132-06T .281 7.14 N/A N/A 19044-0087 A-132-08T .281 7.14 N/A N/A Doc No. ATS-190270306 Revision: A Release Date: 12-04-03 Revision Date: 10-30-06 UNCONTROLLED COPY Page 2 of 3 ATP - Tooling Kit-19027-0306 Parts List Item 1 2 3 4 5 6 Order No. Engineering No. 19027-0306 19027-0306 19027-0028 ATP-A-110-E2 19027-0027 ATP-A-110-E1 19027-0201 DS-187-UPPER 19027-0200 DS-187-LOWER N/A N/A N/A N/A Description ATP Tooling Kit Conductor Punch Conductor Anvil Die Spacer - Upper (.187”) Die Spacer - Lower (.187”) #10-32 by 3/4” Long SHCS O-ring 1/16 W by 9/32” OD Qty REF 1 1 1 1 2** 2** ** The following purchased parts are available from an Industrial supply company such as MSC 1-800-645-7270 3 1 5 (2) 6 (2) 4 2 Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX amerinfo@molex.com Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324 feninfo@molex.com Far East South Headquarters Jurong, Singapore 65-6-268-6868 fesinfo@molex.com European Headquarters Munich, Germany 49-89-413092-0 eurinfo@molex.com Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax: 630-969-1352 Visit our Web site at http://www.molex.com Doc No. ATS-190270306 Revision: A Release Date: 12-04-03 Revision Date: 10-30-06 UNCONTROLLED COPY Page 3 of 3