PRODUCT SPECIFICATION
COSMETIC SPECIFICATION
1.0 SCOPE
This applies to all TBO products.
2.0 PURPOSE
To define acceptability criteria for cosmetic issues
3.0 REFERENCE MATERIAL NUMBERS
This applies to all TBO products.
4.0 DEFINITIONS
Not applicable.
5.0 PROCEDURES
Color:
The use of color in the plastic component of connectors is for product identification only and
not for aesthetic purposes. Lot-to-lot shade variations are acceptable and do not affect the
form, fit, or function of the connectors. The specification only specifies the color, not the
shade of the color. Color is considered a reference specification with no additional specific
requirements.
Plating Appearance:
Matte tin: Matte tin has a dull, non-reflective surface that varies in color from ash-white to
mid-gray. Lot-to-lot shade variations are acceptable and do not affect the form, fit, or function
of the connectors.
Matte tin is inherently soft and susceptible to handling damage that can cause superficial
blemishes which are easily seen by the naked eye due to non-reflective surface. Superficial
blemishes do not affect the form, fit, or function of the connectors.
Exposed copper up to 3% of the entire part is to be considered acceptable and does not
affect the form, fit, or function of the connector.
o Example shown below for PN: B-118-38 Accelerated Salt-Spray Test (5% Mixture).
Exposed area did not show accelerated corrosion
As-Received
REVISION:
A1
ECR/ECN INFORMATION:
EC No: 635275
DATE: 2020 / 4 / 2
DOCUMENT NUMBER:
PS-19902-011
TITLE:
After 96hrs
COSMETIC SPECIFICATION
TBO PRODUCTS
SHEET No.
1 of 1
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
ETHRODAHL/ DMYRICK
JHACKNEY
JMACNEIL
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
很抱歉,暂时无法提供与“0190440325”相匹配的价格&库存,您可以联系我们找货
免费人工找货