0190472230

ATP-201 Tooling Kit- 19047-2230 ATP-201 Tooling Kit Permaseal  Application Tooling Specification Sheet Order No. 19047-2230 SCOPE Tooling: ATP Tooling Kits used with Molex ATP-201 Air Tape Press (19047-0001) or Taped Terminal Crimp Module (64016-2000) in TM-4000 press. Refer to the appropriate tool instruction manual for installation and operation information. Products: Perma-Seal Butt Splice on Tape - 8 AWG Refer to the Product part number charts on this sheet for terminals with the barrel and tongue styles listed above. Testing Mechanical The tensile test or pull test is a means of evaluating the mechanical properties of the crimped connections. The following charts show the UL Specifications for various wire sizes. The tensile strength is shown in pounds and indicates the minimum acceptable force to break or separate the terminal from the conductor. Color Code Red Wire Size (AWG) 8 *UL - 486 A 45 *UL - 486 A - Terminals (Copper Conductors only) PIN GAUGE OR USE SOFT METAL SLUG METHOD “X” (CRIMP HEIGHT) Use gauge pins or soft metal slug (solder) method to measure the “X” dimension. Verify tooling crimp height calibration by referring to the Go/No Go dimensions shown in the chart below. CRIMP PROFILE Molex does not sell gauge pins contact your local industrial supplier. Wire Range AWG 8 mm² 10.00 “X” Dimension Conductor Crimp Mean Go No Go In mm In mm In mm .195 4.95 .190 4.83 .201 5.11 Crimp Inspection Marking N/A The following is a Partial List of the Product Part Numbers and their specifications that this tooling is designed to crimp. We will be adding to this list and an up to date copy is available on www.molex.com. Terminal No. 19164-1105 Doc No. ATS-190472230 Revision: A Wire Size: 8 AWG – 10.00 mm² Wire Strip Length Terminal Eng. No. (REF) In mm SD-354T .387 9.83 Release Date: 09-13-13 Revision Date: 09-13-13 Insulation Diameter Maximum In mm .370 9.40 UNCONTROLLED COPY Page 1 of 2 ATP-201 Tooling Kit- 19047-2230 Parts List Item Order No. Engineering No. Description Qty 19047-2230 19047-2230 ATP-201 Tooling Kit REF 1 19047-2232 19047-2232 Conductor Punch 1 2 19047-2231 19047-2231 Conductor Anvil 1 3 N/A N/A #10-32 by 1” Long SHCS 1** 4 N/A N/A O-ring 1/16 W. by 9/32” O.D. 1** ** The following purchased parts are available from an Industrial supply company such as MSC 1-800-645-7270. 1 4 2 3 Visit our Web site at http://www.molex.com Doc No. ATS-190472230 Revision: A Release Date: 09-13-13 Revision Date: 09-13-13 UNCONTROLLED COPY Page 2 of 2