0190472250

ATP Tooling Kit 19047-2250 Order Number 19047-2250 Application Tooling Specification SCOPE Tooling: ATP Tooling Kits used with Molex ATP-201 Air Tape Press (19047-0001). Refer to the appropriate tool instruction manual for installation and operation information. Products: Insulated Butt-Splice Terminals, 6 AWG. Testing: Mechanical The tensile test or pull test is a means of evaluating the mechanical properties of the crimped connections. The following charts show the UL Specifications for various wire sizes. The tensile strength is shown in pounds and indicates the minimum acceptable force to break or separate terminal from the conductor. Color Code Wire Size (AWG) *UL486 A Blue 6 100 *UL486 A: Terminals (Copper Conductors only) PIN GAUGE OR USE SOFT METAL SLUG METHOD Use gauge pins or soft metal slug (solder) method to measure the “X” dimension. Verify tooling crimp height calibration by referring to the Go/No-Go dimensions shown in the chart below. “X” (CRIMP HEIGHT) CRIMP PROFILE Note: Molex does not sell gauge pins. Contact your local industrial supplier. “X” Dimension Conductor Crimp Mean Go No-Go In. mm In. mm In. mm Wire Range AWG mm² 6 10.50-16.80 .251 6.38 .248 6.31 .254 Crimp Inspection Marking 6.44 6 Wire Size: 6 AWG Terminal No. Terminal Eng No. (REF) 19154-0411 E-662XT Doc No. 190472250 Revision: A Release Date: 03-09-20 Revision Date: 03-09-20 Wire Strip Length Insulation Diameter Max. In. mm In. mm .500 12.70 .440 11.18 UNCONTROLLED COPY Page 1 of 2 ATP Tooling Kit 19047-2250 PARTS LIST Item 1 2 3 4 Order No. Engineering No. Description 19047-2250 19047-2250 ATP-201 Tooling Kit 19047-2251 19047-2251 Conductor Punch 19047-2252 19047-2252 Conductor Anvil — — #10-32 by 1-1/4” Lg. SHCS — — O-ring 1/16 W. by 9/32” O.D. *Available from an industrial supply company. Quantity REF 1 1 1* 1* 1 4 2 3 Application Tooling Support Phone: (402) 458-TOOL (8665) E-Mail: applicationtooling@molex.com Website: www.molex.com/applicationtooling Molex is a registered trademark of Molex, LLC in the United States of America and may be registered in other countries; all other trademarks listed herein belong to their respective owners. Doc No. 190472250 Revision: A Release Date: 03-09-20 Revision Date: 03-09-20 UNCONTROLLED COPY Page 2 of 2