0192210773

12 10 11 UNPLATED MAT'L NO. ON TAPE 190820044 190820045 190820046 190820050 190820047 190820051 190820053 190820054 190820057 190820058 190820059 190820060 190820061 ------------------- H G F 9 7 8 UNPLATED ENG. NO. ON TAPE BCL-410T BCL-414T BCL-4516T BCL-4516-WPT BCL-438T BCL-438-WPT BCL-438-XWPT BCL-412-XWPT BCL-214T BCL-2516T BCL-238T BCL-238-WPT BCL-212-WPT ------------------------- 5 6 D D D D D D D D C C C C C 190820048 BCL-410-PLT 190820049 BCL-414-PLT 190820025 BCL-4516-PLT 190820052 BCL-4516-WP-PLT 190820026 BCL-438-PLT 190820027 BCL-438-WP-PLT 190820055 BCL-438-XWP-PLT 190820056 BCL-412-XWPT-PLT 190820001 BCL-214-PLT 190820002 BCL-2516-PLT 190820030 BCL-238-PLT C4 C4 190820062 BCL-238-WP-PLT 190820063 BCL-212-WP-PLT ------------------------------------------- 4 2 10/4.8mm 1/4"/M6 5/16"/M8 5/16"/M8 3/8"/M9 3/8"/M9 3/8"/M9 1/2"/M12 1/4"/M6 5/16"/M8 3/8"/M9 3/8"/M9 1/2"/M12 10/4.8mm 1/4"/M6 5/16"/M8 3/8"/M9 3/8"/M9 1/2"/M12 4 AWG/25mm 2 4 AWG/25mm 2 4 AWG/25mm 2 4 AWG/25mm 2 4 AWG/25mm 2 4 AWG/25mm 2 4 AWG/25mm 2 4 AWG/25mm 2 2 AWG/35mm 2 2 AWG/35mm 2 2 AWG/35mm 2 2 AWG/35mm 2 2 AWG/35mm 2 1 AWG/50mm 2 1 AWG/50mm 2 1 AWG/50mm 1 AWG/50mm 2 1 AWG/50mm 2 1 AWG/50mm 2 3 2 "S" "L" "W" "C" "B" "T" ±.015/0.38 ±.050/1.27 ±.035/0.89 ±.050/1.27 ±.020/0.51 ±.030/0.76 .214/5.45 .278/7.06 .340/8.64 .340/8.64 .400/10.16 .400/10.16 .400/10.16 .520/13.21 .278/7.06 .340/8.64 .400/10.16 .400/10.16 .520/13.21 .214/5.45 .278/7.06 .340/8.64 .400/10.16 .400/10.16 .520/13.21 1.500/38.10 1.500/38.10 1.500/38.10 1.531/38.89 1.500/38.10 1.531/38.89 1.688/42.88 1.688/42.88 1.625/41.28 1.625/41.28 1.625/41.28 1.750/44.45 1.750/44.45 1.718/43.64 1.718/43.64 1.718/43.64 1.718/43.64 1.844/46.84 1.844/46.84 .531/13.49 .531/13.49 .531/13.49 .625/15.88 .531/13.49 .625/15.88 .766/19.46 .766/19.46 .625/15.88 .625/15.88 .625/15.88 .750/19.05 .750/19.05 .656/16.66 .656/16.66 .656/16.66 .656/16.66 .750/19.05 .750/19.05 .429/10.90 .429/10.90 .429/10.90 .397/10.08 .429/10.90 .397/10.08 .444/11.28 .444/11.28 .437/11.10 .437/11.10 .437/11.10 .474/12.04 .474/12.04 .446/11.33 .446/11.33 .446/11.33 .446/11.33 .474/12.04 .474/12.04 .286/7.26 .286/7.26 .286/7.26 .286/7.26 .286/7.26 .286/7.26 .286/7.26 .286/7.26 .336/8.53 .336/8.53 .336/8.53 .336/8.53 .336/8.53 .360/9.14 .360/9.14 .360/9.14 .360/9.14 .360/9.14 .360/9.14 .080/2.03 .080/2.03 .080/2.03 .080/2.03 .080/2.03 .080/2.03 .100/2.54 .100/2.54 .095/2.41 .095/2.41 .095/2.41 .095/2.41 .095/2.41 .100/2.54 .100/2.54 .100/2.54 .100/2.54 .100/2.54 .100/2.54 H G F 1.20 REF 30.5 (TYP) 4 LOGO, AWG, & STUD SIZE "C" AWG WIRE SIZE 4 STAMPED ON BARREL E 1 "W" FLARED BARREL FOR EASY WIRE ENTRY DETAIL "C" "S"⌀ "L" D D 1.20 REF 30.5 (TYP) "T" "B" ⌀ E .35 REF 8.9 (TYP) C C .29 REF 7.4 (TYP) 5 NOTE(S): 1. FOR INSPECTION SIGHT HOLE, PLEASE CONSULT WITH FACTORY. 2. OTHER STUD SIZES MAY BE AVAILABLE, PLEASE CONSULT WITH FACTORY. B DETAIL "D" 3. MATERIAL: COPPER PLATING: TIN THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 4 MARKINGS CAN BE AT EITHER LOCATION SHOWN. DIMENSION UNITS SCALE IN/MM NTS MM IT MUST BE BENT AROUND A RADIUS ONE-HALF THE TONGUE THICKNESS. ± 3 PLACES ± ± 2 PLACES ± ± ± ± 0 PLACES ± ± ANGULAR TOL DOCUMENT STATUS 12 P1 RELEASE DATE 11 2021/11/19 10 INCH 4 PLACES ± 1 PLACE 6. ALL PARTS ARE RoHS COMPLIANT. FORMAT: Eng-lega-master-tb-prod-C REVISION: E DATE: 2020/01/14 ± DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 15:36:23 9 CURRENT REV DESC: PLATED PN TYPO/ DUPLICATE: SHOULD BE 190820062 (BCL-238-WP-PLT) GENERAL TOLERANCES (UNLESS SPECIFIED) 5 IF TONGUE IS TO BE BENT AT ANY ANGLE, A B 8 7 6 5 ° EC NO: 685764 DRWN: DMYRICK CHK'D: EJOHNSON04 APPR: EJOHNSON04 INITIAL REVISION: DRWN: BE APPR: RD THIRD ANGLE PROJECTION 4 2021/11/16 2021/11/19 2021/11/19 EYELET STYLE COPPER TERMINALS 4, 2, & 1 AWG LUGS PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2002/06/26 2002/06/26 DRAWING SERIES C-SIZE 19221 3 SD-19221-010 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 C5 SHEET NUMBER GENERAL MARKET 1 OF 1 1 A