0192860370

Assembly Inspection Gage Imperium™ Cable Assembly Inspection Gage Application Tooling Specification Sheet Order No. 19286-0370 FEATURES  Provides a quick indication for cable end proper assembly.  Hand held gage.  Hardened tool steel construction. SCOPE The following products are intended for use in this tool. Updates to this list may be found at www.molex.com. Products: Imperium™ Receptacle Harness Assembly Kits for 1/0 and 1 AWG cables, 171466 series. Cable Size 1/0 1/0 1 AWG 1 AWG 171466 Series Numbers Keying Kit Order Number A 171466-9001 B 171466-9002 A 171466-9101 B 171466-9102 DESCRIPTION The Cable Assembly Inspection Gage is used for inspection of an Imperium™ receptacle terminal that has been crimped to a cable using tool 19286-2000 and an appropriate die set. FERRULE CABLE ASSEMBLY TERMINAL RING Figure 1 INSPECTION GAGE INSPECTION GAGE OPERATION After installing the cable ferrules (tool 62203-0600) and crimping the terminal on the cable (tool 19286-2000) the assembly must fit in the gage openings as shown. These openings are the dimensional limits for the fit of the crimped assembly into the connector housing. Contact Information For more information on Molex application tooling please contact Molex at 1-800-786-6539. Visit our Web site at http://www.molex.com Doc No. ATS-192860370 Revision: B Release Date: 11-22-13 Revision Date: 07-30-15 UNCONTROLLED COPY Page 1 of 1