0192900100

Crimp Tool Kit for 1 AWG Imperium Plus Terminals Crimp Tool Kit For Imperium and Imperium Plus Application Tooling Specification Sheet Order No. 19290-0100 SCOPE Tooling: Crimp Tool Kits are used with the Hydraulic Head Crimper with the Air/Hydraulic Pump (192861000). Refer to the appropriate tool instruction manual for installation and operation information. Products: Imperium and Imperium Plus Terminals to 1 AWG bare and pre-tinned copper wire. Refer to the Product part number charts on this sheet for terminals. Testing The tensile test or pull test is a means of evaluating the mechanical properties of the crimped connections. The following chart shows the specifications for the wire size. The tensile strength is shown in Newton and (pounds) and indicates the minimum acceptable force to break or separate the terminal from the conductor. Wire Size (AWG) Minimum Pull (UL 486) 1 890N (200 lbs.) Crimp measurement After crimping, the terminal crimp profiles should measure the following: CRIMP WIDTH Wire Size Crimp Height (Ref) Crimp Width (Ref) AWG Wire Style mm In. mm In. Bare copper 171423 / 171562 1 6.90-7.10 .272-.280 11.95-12.15 .470-.478 Pre-Tinned Bare copper 31561 1 6.85-7.05 .270-.278 11.90-12.10 .469-.476 Pre-Tinned Terminal Series CRIMP PROFILE CRIMP HEIGHT The following is a Partial List of the Product Part Numbers and their specifications that this tooling is designed to crimp. We will be adding to this list and an up to date copy is available on www.molex.com. Terminal Series Terminal No. Wire Size (AWG) Wire Strands / AWG 171423 171562 31561 171423-1402 171562-7004 31561-7001 1 779 / 30 817 / 30 Wire Strip Length In mm 0.87 22.0 CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling. Doc No. ATS-192900100 Revision: C Release Date: 09-28-12 Revision Date: 09-11-14 UNCONTROLLED COPY Page 1 of 2 Crimp Tool Kit for 1 AWG Imperium Plus Terminals Parts List Item Order No. 19290-0100 19290-0101 19290-0102 1 2 Description Crimp Tooling Kit Conductor Anvil Conductor Punch Qty REF 1 1 2 1 Visit our Web site at http://www.molex.com Doc No. ATS-192900100 Revision: C Release Date: 09-28-12 Revision Date: 09-11-14 UNCONTROLLED COPY Page 2 of 2